PGRH Collection
Merchandise Features:
(one) Reduced Sounds:Beneath 65db.
(2) Low Backlash:Backlash is underneath 3 arcmin . Backlash for 2-stage pace reduction is with in 5 arcmin.
(3) High Effectiveness:1-phase up to 95% or a lot more,2-phase up to 92% or far more.
(four) High Enter Velocity:Input velocity enables for up to 8000RPM.
(five) High Torque:Substantial torque output than that of typical planetary gear reducers
(six) Maintenance-Free:Minimal grease wear,can be life time lubrication
(7) High Pace Reduction Ratio:Velocity ratio is more than one/1000.
Advantage:
Usage:
- Aerospace,army sector.
- Health care well being,electronic info business.
- CZPT robots,Generation automation,CNC device resource producing market.
- Motor,Textile,Printing,Food,CZPTlurgical.
- Environmental protection engineering,Warehouse logistics business.
Model ILLUMINATE:
Gear BOX Overall performance Info:
MODUL NO. | Stage | RATIO¹ | PGRH42 | PGRH60 | PGRH90 | PGRH115 | PGRH142 | PGRH180 | PGRH220 | |
Rated output torque T2N | Nm | one | 3 | 20 | 55 | 130 | 208 | 342 | 588 | one,140 |
4 | 19 | 50 | 140 | 290 | 542 | 1,050 | one,700 | |||
five | 22 | 60 | 160 | 330 | 650 | 1,200 | 2,000 | |||
6 | 20 | 55 | 150 | 310 | 600 | one,100 | one,900 | |||
seven | 19 | 35 | 140 | 300 | 550 | one,100 | 1,800 | |||
8 | 17 | 35 | 120 | 260 | 500 | one,000 | one,600 | |||
10 | 14 | 37 | 95 | 220 | 370 | 800 | 1,220 | |||
14 | – | 35 | 140 | 300 | 550 | 1,100 | 1,800 | |||
twenty | – | 37 | 95 | 220 | 370 | 800 | 1,220 | |||
2 | 15 | 20 | 50 | 130 | 208 | 342 | 588 | 1,140 | ||
20 | 19 | 60 | 140 | 290 | 542 | 1,050 | one,700 | |||
25 | 22 | 60 | 160 | 330 | 650 | 1,200 | two,000 | |||
thirty | 22 | 60 | 160 | 330 | 650 | 1,200 | two,000 | |||
35 | 22 | 60 | 160 | 330 | 650 | one,200 | two,000 | |||
forty | 22 | 60 | 160 | 330 | 650 | one,200 | two,000 | |||
fifty | 22 | 60 | 160 | 330 | 650 | one,200 | two,000 | |||
sixty | 22 | 60 | 160 | 330 | 650 | one,200 | 2,000 | |||
70 | 22 | 60 | 160 | 330 | 650 | 1,200 | 2,000 | |||
eighty | 22 | 60 | 160 | 330 | 650 | 1,200 | 2,000 | |||
one hundred | 22 | 60 | 95 | 220 | 370 | 800 | 1,220 | |||
a hundred and twenty | – | – | 150 | 310 | 600 | 1,100 | one,900 | |||
one hundred forty | – | – | 140 | 300 | 550 | 1,100 | 1,800 | |||
160 | – | – | 120 | 260 | 500 | one,000 | one,600 | |||
200 | – | – | 48 | 140 | 370 | 520 | 1,220 | |||
MAX. output torqueT2B | Nm | 1,2 | 3~200 | 3 times of Nominal Output Torque | ||||||
Rated input speed n1 | rpm | 1,2 | 3~200 | five,000 | 5,000 | four,000 | 4,000 | 3,000 | three,000 | 2,000 |
MAX.input speed n1B | rpm | one,two | 3~200 | 10,000 | ten,000 | eight,000 | eight,000 | six,000 | six,000 | four,000 |
Micro Backlash P0 | arcmin | one | 3~20 | – | – | ≤2 | ≤2 | ≤2 | ≤2 | ≤2 |
two | fifteen~200 | – | – | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 | ||
CZPT Backlash P1 | arcmin | 1 | three~twenty | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 |
two | fifteen~200 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ||
CZPT Backlash P2 | arcmin | one | three~20 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 |
two | fifteen~two hundred | ≤9 | ≤9 | ≤9 | ≤9 | ≤9 | ≤9 | ≤9 | ||
Torsional stiffness | Nm/arcmin | 1,two | three~two hundred | 3 | 7 | fourteen | 25 | fifty | 145 | 225 |
Max.radial force F2rB² | N | one,2 | 3~200 | 780 | one,530 | 3,250 | 6,700 | nine,400 | 14,500 | 50,000 |
MAX.axial force F2a1B² | N | one,two | three~200 | 350 | 630 | 1,300 | 3,000 | 4,000 | six,200 | 35,000 |
MAX.axial force F2a2B² | N | one,two | three~200 | 390 | 765 | one,625 | 3,350 | four,700 | seven,250 | twenty five,000 |
Service life | hr | one,2 | three~two hundred | twenty,000* | ||||||
Work efficiency η | % | one | three~twenty | ≥97 | ||||||
two | fifteen~200 | ≥94 | ||||||||
Bodyweight | kg | 1 | 3~20 | .nine | two.one | six.four | thirteen | 24.five | fifty one | eighty three |
2 | fifteen~200 | 1.two | 1.5 | 7.eight | 14.two | 27.5 | 54 | ninety five | ||
Operating temperature | ºC | one,2 | three~200 | -10ºC~+90ºC | ||||||
Lubrication | one,two | three~200 | Synthetic lubricating oil | |||||||
Protection level | one,two | three~two hundred | IP65 | |||||||
Installation direction | one,2 | 3~200 | Any direction | |||||||
Noise level(n1=3000rpm) | dB | 1,two | 3~200 | ≤61 | ≤63 | ≤65 | ≤68 | ≤70 | ≤72 | ≤74 |
Outline DIMENSION:
Business Look at:
HangCZPT CZPT CZPT & CZPTal Co., Ltd. is a subsidiary of ZheCZPT Jun Yi CZPT. Jun Yi CZPT was established in March 1972. The firm specializes in the style, development and generation of higher-tech different geared motors and helical gear reducers, worm and worm equipment reducers and planetary reducers. Our products offered to more than 30 nations around the world about the world and win excellent reputation and numerous awards in the overseas market for several a long time. In modern several years, to attain world-wide production and give outstanding services,we set up subsidiary of manufacturing of planetary equipment reducer in China.
Historical past:
1972:ZheCZPT Jun Yi CZPT is founded.
1989:It proven a overseas branch company ATRUMP CZPT INC in Los Angeles
1995:Pass the ISO9002 Commodity certification.
2003:Pass the CZPT good quality certification and the CZPTpean CE standard test which enabled the merchandise to be bought in CZPTpe
2013:The organization set up subsidiary in China to obtain worldwide generation.
Manufacturing unit:
Knowledge Made In ATG,Wisdom The Globe.
Products:
INSPECTION Equipment:
FAQ:
(1) Can I be your agent?
Sure, welcome to deep cooperation. We have big promotion of ATG brand in the market now. For the details make sure you speak to me.
(2) Is OEM CZPT?
Indeed, OEM is CZPT. We have specialist designer to aid your brand advertising.
(3) How can I get a sample to check your quality?
After price tag affirmation, you can require for samples to check out our good quality. Free for the samples, but you need to pay for the freight.
(four)What is actually your quality assure?
We have diverse kinds of merchandise which can meet various high quality regular.
Our QC department will take a look at items before delivery. We have 100% good quality promise to customers. We will be liable for any top quality dilemma.
(five) How about the supply time?
The shipping time is based on the products and the quantity. But normally, the supply time for a container is about a single month.
Welcome to our organization.
If any issue, really feel cost-free to go away concept on the base of this website page.