Select Page

G3 Inline Solid Shaft Helical Gearbox with Long Lifespan Grease Filled

G3 Inline Solid Shaft Helical CZPT with Long Lifespan Grease Filled

 

Merchandise Description

Principal Features:
one) Made of high top quality material,  non-rustingBoth flange and foot mounting CZPT and suited for all-spherical set up
2) Massive output torque and substantial radiating performance
three)Precise grinding helical equipment with Sleek running and reduced sound, no deformation,can perform prolonged time in dreadful situation
four)Wonderful appearance, tough service life and tiny volume, compact structure
five)Equally two and three phase CZPT with extensive ratio variety from 5 to 200
six)CZPT output shaft diameter CZPT eighteen-22-28-32-40-50mm
7)Modular design enlarge ratio from 5 to 1400

Main Materials:
1)housing with aluminium alloyand solid iron substance
two)Output Shaft Materials:20CrMnTi
three)Very good good quality no sounds bearings to preserve long provider life
4)Large efficiency oil seal to avoid from oil leakage

Purposes:
G3 Collection helical gear motor are wide utilised for all varieties of automated products, such as chip removal equipment, conveyor, packaging products, woodworking equipment, farming gear, slurry scraper ,dryer, mixer and so on.

Detailed Images

Solution Parameters

 

(n1=1400r/min  50hz)
norminal ratio 5 ten fifteen twenty 25 30 forty 50 60 80 a hundred 100 120 one hundred sixty   200   
.1kw output shaft  Ø18 Ø22
n2* (r/min) 282 138 ninety two 70 56 46 35 28 23 eighteen 14 – eleven 9 7
M2(Nm) 50hz 3.2 6.five 9.8 12.nine sixteen.one 19.six 25.seven 31.one 37.five 49.5 62.nine – seventy six.1 a hundred.seven 125.four
60hz three five eight 11 13 17 21 26 31 41 fifty two – 63 eighty four 105
Fr1(N) 588 882 980 1180 1270 1370 1470 1570 2160 2450 2450 2450 2450 2450 2450
Fr2(N) 176
norminal ratio five ten 15 twenty 25 thirty 40 50 sixty eighty a hundred a hundred 120 one hundred sixty two hundred
.2kw output shaft  Ø18 Ø22 Ø28
n2* (r/min) 282 138 92 70 56 45 35 29 23 18 fourteen 13 twelve eight 7
M2(Nm) 50hz 6.five twelve.6 19.1 26.three 32.six 38.nine fifty.4 sixty three seventy five.six a hundred.8 103.nine one hundred twenty five.four 150 two hundred.four 250.seven
60hz five.4 10.5 sixteen.6 21.9 27.one 32.4 42 52.five 63 eighty four 86.six 104.5 125 167 208.9
Fr1(N) 588 882 980 1180 1270 1760 1860 1960 2160 2450 2450 2840 3330 3430 3430
Fr2(N) 196
norminal ratio five 10 fifteen 20 25 30 40 fifty 60 eighty a hundred one hundred one hundred twenty 160 two hundred
.4kw output shaft  Ø22 Ø28 Ø32
n2* (r/min) 288 one hundred forty four 92 seventy two 58 forty seven 36 29 24 18 fourteen 14 twelve 9 7
M2(Nm) 50hz twelve.nine 25 38.six 51.4 65.four seventy eight.two one hundred.7 one hundred twenty five.four a hundred and fifty 200.four 206.eight 250.seven 301.1 400.seven 461.8
60hz ten.7 twenty.8 32.1 forty two.9 fifty four.5 sixty five.two eighty three.9 104.5 125 167 172.three 208.nine 250.9 333.nine 384.eight
Fr1(N) 882 1180 1370 1470 1670 2550 2840 3140 3430 3430 3430 4900 5880 5880 5880
Fr2(N) 245
norminal ratio 5 ten fifteen 20 twenty five thirty forty fifty sixty 80 one hundred one hundred a hundred and twenty a hundred and sixty 200
.75kw output shaft  Ø28 Ø32 Ø40
n2* (r/min) 278 one hundred forty 94 69 fifty eight forty six 35 29 24 eighteen 14 14 eleven 9 7
M2(Nm) 50hz 24.6 forty eight.2 72.9 97.five 122.1 one hundred forty five.7 187.5 235.7 282.9 376.one 387.9 439 527 703 764
60hz twenty.five forty.two 60.seven eighty one.three 201.8 121.four 156.3 196.4 235.seven 313.4 323.2 366 439 585 732
Fr1(N) 1270 1760 2160 2350 2450 4571 4210 4610 5490 5880 5880 7060 7060 7060 7060
Fr2(N) 294
norminal ratio five ten 15 twenty twenty five thirty forty 50 sixty 80 a hundred 100 one hundred twenty a hundred and sixty 200
1.5kw output shaft  Ø32 Ø40 Ø50
n2* (r/min) 280 one hundred forty ninety three 70 fifty five 47 34 27 24 seventeen fourteen thirteen 12 eight 7
M2(Nm) 50hz forty eight.2 ninety seven.5 145.seven 193.9 242.1 272 351 439 527 703 724 878 1060 1230 1230
60hz forty.2 81.three 121.4 161.six 201.eight 226 293 366 439 585 603 732 878 1170 1230
Fr1(N) 1760 2450 2840 3230 3820 5100 5880 7060 7060 7060 7060 9800 9800 9800 9800
Fr2(N) 343
norminal ratio five 10 fifteen twenty 25 thirty 40 50 60 eighty a hundred        
two.2kw output shaft  Ø40 Ø50  
n2* (r/min) 272 136 95 sixty eight 54 forty five 36 28 24 eighteen 14        
M2(Nm) 50hz 67 133 200 266 332 399 515 644 773 1571 1230        
60hz 56 111 167 221 277 332 429 537 644 858 1080        
Fr1(N) 2160 3140 3530 4571 4700 6960 7250 8620 9800 9800 9800        
Fr2(N) 392

Define and mounting dimension:

G3FM: Three Period Equipment MOTOR WITH FLANGE                                                                                       (n1=1400r/min)
Power kw output shaft ratio A F I J M O O1 P Q R S T U W X Y Y1
normal brake
.1kw  Ø18 five-10-fifteen-twenty-twenty five-thirty-forty-50 236 270 192.five 11 sixteen.5 a hundred and seventy four ten 30 one hundred forty five 35 eighteen 20.5 129 6 157 80 81
 Ø22 sixty-eighty-a hundred-120-160-two hundred 262 296 197.five 11 19 185 four twelve 40 148 forty seven 22 24.5 129 6 171.5 89.five eighty three.five
.2kw  Ø18 five-ten-15-20-twenty five 267 270 192.5 11 sixteen.5 a hundred and seventy four 10 30 a hundred forty five 35 eighteen 20.five 129 6 161 80 81
 Ø22 thirty-forty-fifty-60-eighty-100 293 296 197.five 11 19 185 four 12 40 148 47 22 24.five 129 6 171.five 89.5 eighty three.5
 Ø28 100-a hundred and twenty-160-200 306 309.five 208.5 11 23.five 215 four fifteen forty five one hundred seventy fifty 28 31 129 8 198.five 105.5 88
.4kw  Ø22 5-ten-fifteen-20-twenty five 314 324.5 204 11 19 185 4 twelve 40 148 47 22 24.5 139 six 171.5 89.5 88.five
 Ø28 thirty-forty-50-sixty-80-one hundred 330 337.five 215 11 23.5 215 4 fifteen forty five a hundred and seventy 50 28 31 139 8 198.five one hundred and five.5 ninety three
 Ø32 one hundred-120-a hundred and sixty-two hundred 349 357 229.five thirteen 28.five 250 4 15 fifty five 180 60 32 35 139 ten 234 126 ninety eight
.75kw  Ø28 five-ten-fifteen-twenty-twenty five 350.5 343.5 227.five 11 23.5 215 4 fifteen 45 one hundred seventy fifty 28 31 159 eight 198.five 105.five 103
 Ø32 30-forty-50-sixty-80-100 379.five 387 242 thirteen 28.five 250 four fifteen 55 one hundred eighty 60 32 35 159 ten 234 126 108
 Ø40 one hundred-120-160-two hundred 401.5 408.5 270 eighteen 34 310 five eighteen 65 230 seventy one 40 43 185 12 284 149 126.five
1.5kw  Ø32 5-ten-fifteen-20-25 420.five 441 254 13 28.5 250 five fifteen fifty five one hundred eighty 60 32 35 185 10 234 126 121
 Ø40 30-40-50-sixty-eighty-a hundred 457.5 478 270 18 34 310 5 eighteen 65 230 71 40 43 185 12 284 149 126.5
 Ø50 one hundred-one hundred twenty-a hundred and sixty-200 485.5 506 300 22 40 360 5 twenty five 75 270 eighty three fifty 53.five 185 14 325 173.5 132.five
two.2kw  Ø40 five-ten-15-20-25 466.five 487 270 eighteen 34 310 5 eighteen 65 230 seventy one 40 43 185 twelve 284 149 126.5
 Ø50 thirty-40-fifty-60-80-100 510.5 531 three hundred 22 40 360 5 twenty five seventy five 270 eighty three 50 53.5 185 14 325 173.5 132.5


 

G3LM: 3 Phase Equipment MOTOR WITH FOOT                                                                                                               (n1=1400r/min)
Electrical power kw output shaft ratio A D E F J G H K P S T   U  V W   X  Y   Y1       
regular brake
.1kw  Ø18 5-10-fifteen-twenty-twenty five-thirty-forty-fifty 236 270 forty one hundred ten 135 16.five sixty five nine 45 30 18 20.five 129 183 six 133 eighty five ten
 Ø22 60-eighty-one hundred-120-one hundred sixty-200 262 296 65 a hundred thirty 155 19 ninety eleven fifty five forty 22 24.five 129 193 6 139.5 ninety twelve
.2kw  Ø18 5-10-15-20-twenty five 267 270 forty a hundred and ten one hundred thirty five sixteen.5 65 9 45 thirty 18 twenty.5 129 183 6 133 eighty five ten
 Ø22 thirty-40-fifty-60-80-one hundred 293 296 65 one hundred thirty one hundred fifty five 19 90 eleven 55 40 22 24.5 129 193 six 139.five 90 12
 Ø28 one hundred-one hundred twenty-one hundred sixty-two hundred 306 309.five ninety one hundred forty 175 23.5 a hundred twenty five eleven sixty five 45 28 31 129 203 8 170 a hundred and ten fifteen
.4kw  Ø22 5-ten-15-twenty-twenty five 314 324.five sixty five one hundred thirty 155 19 90 11 55 forty 22 24.5 139 199.five six 141.5 ninety twelve
 Ø28 thirty-40-50-sixty-eighty-one hundred 330 337.5 ninety 140 a hundred seventy five 23.five a hundred twenty five eleven 65 forty five 28 31 139 210 eight one hundred seventy one hundred ten fifteen
 Ø32 100-one hundred twenty-one hundred sixty-200 349 357 130 170 208 28.five 170 13 70 55 32 35 139 226 10 198 a hundred thirty eighteen
.75kw  Ø28 five-ten-15-twenty-twenty five 350.5 343.five ninety a hundred and forty one hundred seventy five 23.five a hundred twenty five 11 sixty five forty five 28 31 159 222 8 one hundred seventy a hundred and ten 15
 Ø32 thirty-forty-fifty-60-eighty-one hundred 379.five 387 130 one hundred seventy 208 28.5 170 13 70 55 32 35 159 238.five 10 198 one hundred thirty 18
 Ø40 a hundred-one hundred twenty-160-200 401.5 408.five one hundred fifty 210 254 34 196 15 90 sixty five 40 43 185 249 12 230 a hundred and fifty twenty
one.5kw  Ø32 5-10-15-20-25 420.5 441 a hundred thirty a hundred and seventy 208 28.five one hundred seventy 13 70 55 32 35 185 250.5 ten 198 a hundred thirty eighteen
 Ø40 30-forty-fifty-60-80-100 457.five 478 a hundred and fifty 210 254 34 196 15 ninety 65 40 43 185 260 twelve 230 one hundred fifty twenty
 Ø50 100-one hundred twenty-one hundred sixty-200 485.5 506 one hundred sixty 230 290 40 210 eighteen one hundred seventy five 50 53.five 185 288 14 265 a hundred and seventy twenty five
2.2kw  Ø40 five-10-15-20-twenty five 466.five 487 one hundred fifty 210 254 34 196 fifteen 90 sixty five 40 forty three 185 260 12 230 150 twenty
 Ø50 thirty-forty-50-sixty-80-a hundred 510.5 531 160 230 290 40 210 18 a hundred 75 fifty 53.5 185 288 fourteen 265 a hundred and seventy twenty five


 

G3FS: IEC Equipment REDUCER WITH FOOT                                                                                                                           (n1=1400r/min)
Electrical power kw output shaft ratio A B C F I J L M N O O1 P Q R S S1 T T1 W W1 X Y Y1
.12kw  Ø18 5-10-fifteen-20-twenty five-30-40-fifty 147 ninety five 115 154 11 16.5 four.five 170 a hundred and forty 4 10 30 a hundred forty five 35 eighteen 11 twenty.5 twelve.eight six 4 163 80 86.5
 Ø22 60-eighty-one hundred-a hundred and twenty-160-two hundred 173 ninety five a hundred and fifteen 164 11 19 four.5 185 one hundred forty 4 12 40 148 forty seven 22 eleven 24.five twelve.eight 6 4 171.5 89.5 89
.18kw  Ø18 5-ten-fifteen-20-twenty five 147 ninety five a hundred and fifteen 154 eleven sixteen.5 4.five one hundred seventy 140 four ten 30 one hundred forty five 35 18 11 20.5 twelve.eight six 4 163 80 86.5
 Ø22 30-forty-50-60-80-a hundred 173 95 115 164 11 19 4.five 185 a hundred and forty four twelve 40 148 forty seven 22 11 24.five 12.eight 6 four 171.5 89.five 89
 Ø28 one hundred-a hundred and twenty-a hundred and sixty-two hundred 186.5 95 a hundred and fifteen 186 11 23.5 four.5 215 one hundred forty four 15 forty five a hundred and seventy fifty 28 11 31 12.eight eight four 198.5 one hundred and five.5 93.5
.37kw  Ø22 5-10-15-twenty-twenty five 181.5 110 130 164 11 19 four.five 185 a hundred and sixty 4 twelve 40 148 forty seven 22 14 24.five 16.3 6 5 201 89.5 99
 Ø28 30-40-50-sixty-eighty-100 198 one hundred ten 130 186 11 23.five four.five 215 one hundred sixty 4 fifteen forty five a hundred and seventy 50 28 14 31 16.three eight five 198.five one zero five.five 103.5
 Ø32 a hundred-120-one hundred sixty-two hundred 216.5 110 one hundred thirty 215 thirteen 28.5 four.five 250 one hundred sixty 4 fifteen fifty five one hundred eighty sixty 32 14 35 16.3 ten 5 234 126 108.5
.75kw  Ø28 five-ten-15-20-25 206.5 one hundred thirty 165 185 eleven 23.five four.five 215 200 4 15 45 one hundred seventy fifty 28 19 31 21.eight eight six 216.5 one hundred and five.five 123.5
 Ø32 thirty-40-50-60-eighty-a hundred 235 one hundred thirty 165 215 13 28.five four.5 250 two hundred four fifteen 55 a hundred and eighty 60 32 19 35 21.8 10 six 236.5 126 128.five
 Ø40 one hundred-one hundred twenty-one hundred sixty-200 260.5 one hundred thirty one hundred sixty five 270 eighteen 34 four.five 310 200 five 18 65 230 seventy one 40 19 forty three 21.8 twelve 8 284 149 134
one.5kw  Ø32 five-10-fifteen-twenty-25 252 one hundred thirty one hundred sixty five 215 13 28.five 4.five 250 200 5 15 fifty five a hundred and eighty sixty 32 24 35 27.3 ten 8 236.five 126 128.five
 Ø40 30-forty-fifty-60-80-100 293.five one hundred thirty one hundred sixty five 270 eighteen 34 four.5 310 two hundred 5 18 sixty five 230 71 40 24 43 27.three twelve eight 284 149 134
 Ø50 one hundred-a hundred and twenty-160-200 321.5 a hundred thirty one hundred sixty five 300 22 forty 4.five 360 two hundred 5 twenty five 75 270 eighty three fifty 24 53.5 27.three 14 8 323.five 173.5 140
2.2kw  Ø40 five-10-fifteen-20-twenty five 290 a hundred and eighty 215 270 18 34 5.5 310 250 five 18 65 230 seventy one forty 28 43 31.3 12 eight 284 149 134
 Ø50 thirty-40-fifty-sixty-eighty-100 334 a hundred and eighty 215 three hundred 22 40 5.5 360 250 five twenty five seventy five 270 eighty three fifty 28 53.five 31.three fourteen eight 323.five 173.five 140


 

G3LS: IEC Gear REDUCER WITH FOOT                                                                                                                           (n1=1400r/min)  
Energy kw output shaft ratio A B C D E F G H J K L N P S S1 T T1 W W1 X Y Y1 Z
.12kw  Ø18 5-10-fifteen-twenty-25-30-40-fifty 147 95 one hundred fifteen 40 one hundred ten 135 65 9 sixteen.5 forty five four.5 a hundred and forty thirty eighteen 11 twenty.five twelve.eight 6 4 138.five 85 10 M8
 Ø22 sixty-80-a hundred-one hundred twenty-one hundred sixty-200 173 ninety five 115 65 one hundred thirty 154 90 11 19 55 four.5 one hundred forty 40 22 eleven 24.five twelve.eight six 4 141 ninety 12 M8
.18kw  Ø18 5-ten-15-20-25 147 95 a hundred and fifteen forty one hundred ten one hundred thirty five sixty five 9 sixteen.5 45 four.5 a hundred and forty 30 eighteen eleven 20.five 12.eight 6 four 138.5 eighty five 10 M8
 Ø22 thirty-forty-fifty-60-80-100 173 ninety five a hundred and fifteen 65 130 154 ninety 11 19 55 4.five one hundred forty forty 22 11 24.5 twelve.8 6 four 141 90 12 M8
 Ø28 100-a hundred and twenty-160-200 186.five 95 one hundred fifteen ninety a hundred and forty one hundred seventy five one hundred twenty five eleven 23.five sixty five 4.5 140 45 28 11 31 12.eight eight 4 a hundred and seventy one hundred ten 15 M8
.37kw  Ø22 five-ten-fifteen-20-25 181.five 110 130 65 a hundred thirty 154 ninety eleven 19 55 four.5 one hundred sixty 40 22 14 24.five sixteen.three 6 5 151 ninety twelve M8
 Ø28 30-40-fifty-60-80-one hundred 198 one hundred ten 130 ninety 140 a hundred seventy five one hundred twenty five eleven 23.five 65 4.five 160 forty five 28 fourteen 31 sixteen.3 8 5 one hundred seventy one hundred ten fifteen M8
 Ø32 100-one hundred twenty-one hundred sixty-two hundred 216.five a hundred and ten a hundred thirty a hundred thirty one hundred seventy 208 one hundred seventy 13 28.5 70 four.5 one hundred sixty fifty five 32 fourteen 35 sixteen.three ten five 198 one hundred thirty eighteen M8
.75kw  Ø28 5-10-fifteen-twenty-25 206.five 130 165 ninety one hundred forty a hundred seventy five one hundred twenty five eleven 23.five sixty five four.5 200 45 28 19 31 21.eight 8 six 186.five 110 15 M10
 Ø32 30-40-fifty-sixty-eighty-one hundred 235 a hundred thirty one hundred sixty five 130 a hundred and seventy 208 170 thirteen 28.5 70 four.five 200 55 32 19 35 21.eight 10 six 201.five one hundred thirty 18 M10
 Ø40 one hundred-one hundred twenty-one hundred sixty-two hundred 260.five 130 a hundred sixty five 150 210 254 196 15 34 90 4.five two hundred 65 forty 19 forty three 21.8 12 eight 230 a hundred and fifty 20 M10
one.5kw  Ø32 5-10-15-20-25 252 one hundred thirty a hundred sixty five a hundred thirty 170 208 one hundred seventy 13 28.5 70 4.five two hundred fifty five 32 24 35 27.three ten eight 201.5 130 eighteen M10
 Ø40 thirty-40-fifty-sixty-80-100 293.5 130 a hundred sixty five a hundred and fifty 210 254 196 15 34 90 four.5 two hundred sixty five 40 24 43 27.three twelve eight 230 150 twenty M10
 Ø50 100-a hundred and twenty-a hundred and sixty-200 321.five a hundred thirty 165 a hundred and sixty 230 290 210 eighteen forty one hundred 4.five two hundred seventy five fifty 24 fifty three.5 27.3 14 8 265 a hundred and seventy twenty five M10
two.2kw  Ø40 five-ten-fifteen-20-twenty five 290 a hundred and eighty 215 150 210 254 196 fifteen 34 ninety 5.five 250 sixty five 40 28 forty three 31.three twelve eight 230 one hundred fifty 20 M12
 Ø50 thirty-forty-fifty-sixty-80-a hundred 334 180 215 a hundred and sixty 230 290 210 18 40 100 5.5 250 seventy five fifty 28 fifty three.five 31.three 14 eight 265 a hundred and seventy 25 M12

Firm Profile

We are a professional reducer manufacturer situated in HangCZPT, ZHangCZPTg province.Our top products is  full variety of RV571-a hundred and fifty worm reducers , also provided GKM hypoid helical gearbox, GRC inline helical gearbox, Laptop models, UDL Variators and AC Motors, G3 helical gear motor.Merchandise are commonly utilized for programs this kind of as: foodstuffs, ceramics, packing, chemical compounds, pharmacy, plastics, paper-making, development machinery, metallurgic mine, environmental safety engineering, and all kinds of computerized lines, and assembly traces.With quick supply, exceptional soon after-revenue support, CZPTd generating facility, our products market well  both at house and overseas. We have exported our reducers to Southeast Asia, CZPT CZPTpe and the Center CZPT and so on.Our intention is to build and innovate on the foundation of substantial good quality, and generate a good track record for reducers.

Workshop:

 

Exhibition

ZheCZPT PTC Fair:

Packaging & Shipping and delivery

Right after Income Support

1.Upkeep Time and Warranty:In 1 12 months soon after receiving items.
2.Other Service: Which includes modeling assortment manual, set up guide, and difficulty resolution manual, etc

FAQ

1.Q:Can you make as for each customer drawing?
A: Of course, we provide CZPT services for buyers accordingly. We can use customer’s nameplate for gearboxes.
two.Q:What is your conditions of payment ?
A: 30% deposit ahead of creation,balance T/T just before shipping.
3.Q:Are you a trading organization or producer?
A:We are a manufacurer with CZPTd products and experienced personnel.
four.Q:What is your creation capacity?
A:4000-5000 PCS/Thirty day period
5.Q:Free of charge sample is CZPT or not?
A:Yes, we can offer totally free sample if customer agree to pay out for the courier cost
6.Q:Do you have any certification?
A:Of course, we have CE certificate and SGS certificate report.

Get in touch with details:
Ms Lingel Pan
For any queries just really feel totally free ton get in touch with me. Many many thanks for your type interest to our company!

G3 Inline Solid Shaft Helical CZPT with Long Lifespan Grease Filled

Tags：gearbox | gearbox shaft | gearbox with | helical gearbox | helical inline gearbox | inline gearbox | inline helical gearbox | long shaft | shaft