High Precision and Helix Gear Square 90mm Af Series Planetary Gearbox for Servo Motor

High CZPT and Helix Gear Square 90mm Af Series Planetary CZPT for Servo Motor

Substantial CZPT and CZPTx Gear Sq. 90mm AF Sequence Planetary CZPT for Servo Motor

Item Description

AF Series Planetary CZPT furthermore provides entrance and rear oil seals, utilizes the output shaft double assistance construction and design and style of helix gear, which can make the equipment meshing  smoother and steady, the AF Sequence can be used in numerous manage transmission fields with servo motors. The backlash of the AF sequence is significantly less than five arc.min and the reduction ratio covers three~a hundred.  

The Product Advantages of Planetary CZPT:

one.Versatile framework design, in line with numerous operating conditions.
2.Ring gear processing engineering: Making use of inside gear slotting equipment and hobbling equipment the precision of ring gear right after processing can attain GB7.
three.Hardened gear secondary scraping technology: secondary high-speed dry cutting of gear eliminates equipment deformation brought on by heat treatment method. Gear precision can get to GB6.
four.CZPT backlash tests.

How To Read
90    AF    10    (  )     (S) – 40   T1
 a       b      c      d        e       f       g

a    Frame Dimension     90=90mm
b    Series code: AF     Square mounting flange series
c    Reduction Ratio     Solitary Phase: 3,four,five,6,seven,8,9,10
    Two Levels: fifteen,twenty,25,thirty,35,forty,forty five,fifty,60,70,80,ninety,a hundred
d    Backlash     One Phase: ≤5arc.min  
    Two Stages: ≤8arc.min 
e    Input shaft type     S: All round locking (Omitted) (Irrespective of regardless of whether the motor has a keyway)
    S1: Locking with locking ring (Regardless regardless of whether the motor has a  keyway )
    S2: Locking with keyway (Input shaft with important)
    K: With keyway
    A: Other types (Please make contact with with us)
f Applicable servo motor energy (W),You should get in touch with us for particular electricity
g Please contact us for the mounting type of the flange

 

Spesifications & Details

 

Item Type Unit Number Of Phase Reduction Ratio 90AF
Rated Output Torque N.M one 3 eighty five
4 95
5 a hundred and five
seven 93
8 83
10 70
2 12 115
fifteen a hundred and fifteen
sixteen one hundred thirty
20 130
twenty five one hundred thirty five
32 one hundred twenty
35 one hundred twenty five
40 a hundred and fifteen
50 135
64 eighty three
eighty 83
a hundred 73
Max. radial drive* N one,two 3~a hundred 2100
Max. axial drive* one,two 3~100 1050
Full Load Efficiency % 1 3~ten ≥97%
2 15~a hundred ≥94%
Backlash arc.min 1 three~ten ≤5
two fifteen~a hundred ≤8

*Highest radial pressure and highest axial force, when the output is 100rpm, it acts on the center place (L/two) of the output shaft.

Dimensions (mm):

Merchandise type No. of stage L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 D1 D2  
90AF 1 151 33.7 77.3 forty 36 28 four three forty 10 Φ90 Φ70G7  
2 one hundred sixty five.five 91.eight
No. of phase D3 D4 D5 D6 D7 D8 D9 D10 B1 H1 G1 G3 Q3
one,two ≤19G7 Φ20h7 Φ30 Φ80h7 Φ90 Φ100 Φ6.five ninety 6 22.5 M5×12 M6×18 eighty

Specifics of AF collection Planetary CZPT

Mechanism

Compact output shaft mechanism

It adopts the style of output shaft built-in method, compact structure, high rigidity, and it can face up to large impact. Location the input coupling and the sun gear at the centre of the output shaft to increase the concentricity of the components, thus successfully controlling the gear clearance and strengthening the backlash of the whole gearbox.
 

Construction

Entire needle framework

The inner bearing of the planetary gear adopts a full-needle layout, the interior gap is manufactured by a grinding procedure, the surface hardness is HRC60, and the cylindricity is much less than .003mm.
 

Other Model Varieties of AF sequence Planetary CZPT
 

A lot more items,please click below…
 

Assembly Procedure

You should follow the ideas bellow to assemble the servo motor and reducer. Besides for specified goods, there are numerous proportions of servo motors, some motors could not be ready to link with flanges.Therefore, be sure to use the proper motor which is specified when spot your purchase.

 

In Scenario Of Assembling A Motor Without having Crucial

one.Take off the rubber cap, flip the enter shaft, and match the head of the bolt to the gap of the rubber cap. Make positive that the correcting bolt is loosened.

2.Gradually set the motor shaft into the input shaft (Make certain that it is smoothly put in CZPT jam.). Be mindful not to be inserted with the motor tilted.

3.Connect the motor to the reducer and fasten the bolt with selected fastening torque. See Table one.

4.CZPTen the correcting bolt of the input shaft with specified fastening torque wrench, and so forth. See Desk two.

five.Place on the rubber cap.
 

 

Table one

Motor Mixture Bolt CZPTening Torque
(N·m) (kgf·cm)
M3 1. 10
M4 3. thirty
M5 five.8 60
M6 nine.eight 100
M8 19.6 two hundred
M10 39.two four hundred
M12 68.six 700
M16 168 1650

Desk 2

Combination Bolt CZPTening Torque
(N·m) (kgf·cm)
M3 one.five fifteen
M4 3.five 35
M5 7.one seventy one
M6 twelve one hundred twenty
M8 30 300
M10 sixty 612

 

Organization Profile

Shipping and delivery

Our Providers

1.Servicing time & Guarantee: 1 calendar year soon after leaving factory 
two.Other provider: Such as modeling variety manual, set up guidebook, and difficulty shooting information, etc.

FAQ

Q: What’re your primary items?
A: We currently make Brushed DC Motors, Brushed DC Equipment Motors, Planetary DC Equipment Motors, Brushless DC Motors, AC Motors, High CZPT Planetary CZPT and CZPT Cycloidal CZPT and so on.. You can check the specs for previously mentioned motors on our site and you can email us to advocate required motors per your specification too.

Q: How to pick a appropriate motor or gearbox?
A:If you have motor images or drawings to demonstrate us, or you have thorough technical specs, these kinds of as, voltage, speed, torque, motor measurement, operating manner of the motor, necessary life time and noise amount etc, make sure you do not hesitate to enable us know, then we can suggest suited motor for each your request appropriately.

Q: Do you have a CZPT service for your normal motors or gearboxes?
A: Sure, we can personalize per your ask for for the voltage, pace, torque and shaft measurement/shape. If you need to have added wires/cables soldered on the terminal or want to incorporate connectors, or capacitors or EMC we can make it also.

Q: Do you have an personal design provider for motors?
A: Of course, we would like to style motors independently for our buyers, but some sort of  molds are necessory to be developped which may possibly want precise cost and layout charging. 

Q: What’s your direct time?
A: CZPTly speaking, our regular regular item will want 15-30days, a bit lengthier for CZPT goods. But we are extremely adaptable on the direct time, it will depend on the particular orders.
 

 

High CZPT and Helix Gear Square 90mm Af Series Planetary CZPT for Servo Motor