Solution Description
Main Features:
one) Manufactured of large quality substance, non-rustingBoth flange and foot mounting CZPT and suitable for all-round installation
2) Large output torque and higher radiating effectiveness
3)Precise grinding helical equipment with Smooth working and minimal noise, no deformation,can function long time in dreadful condition
4)Good visual appeal, resilient support existence and little volume, compact composition
5)Equally two and a few stage CZPT with vast ratio assortment from 5 to two hundred
6)CZPT output shaft diameter CZPT 18-22-28-32-forty-50mm
seven)Modular construction enlarge ratio from five to 1400
Principal Resources:
1)housing with aluminium alloyand cast iron materials
two)Output Shaft Substance:20CrMnTi
three)Great high quality no sound bearings to hold prolonged provider lifestyle
4)High efficiency oil seal to prevent from oil leakage
Purposes:
G3 Sequence helical gear motor are extensive used for all kinds of automatic equipment, such as chip removing device, conveyor, packaging equipment, woodworking machinery, farming gear, slurry scraper ,dryer, mixer and so on.
Comprehensive Images
Solution Parameters
(n1=1400r/min 50hz) | |||||||||||||||||
norminal ratio | 5 | ten | fifteen | 20 | 25 | thirty | 40 | fifty | sixty | 80 | 100 | one hundred | 120 | a hundred and sixty | 200 | ||
.1kw | output shaft | Ø18 | Ø22 | ||||||||||||||
n2* (r/min) | 282 | 138 | 92 | 70 | fifty six | forty six | 35 | 28 | 23 | eighteen | 14 | – | 11 | 9 | 7 | ||
M2(Nm) | 50hz | 3.2 | 6.5 | nine.eight | twelve.9 | 16.one | 19.six | twenty five.7 | 31.one | 37.five | 49.5 | 62.nine | – | 76.1 | 100.7 | 125.four | |
60hz | 3 | 5 | eight | eleven | thirteen | 17 | 21 | 26 | 31 | forty one | 52 | – | 63 | eighty four | 105 | ||
Fr1(N) | 588 | 882 | 980 | 1180 | 1270 | 1370 | 1470 | 1570 | 2160 | 2450 | 2450 | 2450 | 2450 | 2450 | 2450 | ||
Fr2(N) | 176 | ||||||||||||||||
norminal ratio | five | 10 | 15 | 20 | 25 | thirty | 40 | 50 | 60 | 80 | a hundred | one hundred | one hundred twenty | one hundred sixty | two hundred | ||
.2kw | output shaft | Ø18 | Ø22 | Ø28 | |||||||||||||
n2* (r/min) | 282 | 138 | ninety two | 70 | fifty six | forty five | 35 | 29 | 23 | eighteen | fourteen | thirteen | 12 | 8 | 7 | ||
M2(Nm) | 50hz | 6.five | 12.6 | 19.one | 26.3 | 32.6 | 38.9 | 50.4 | 63 | 75.six | 100.8 | 103.9 | one hundred twenty five.4 | a hundred and fifty | two hundred.4 | 250.7 | |
60hz | 5.4 | 10.5 | sixteen.6 | 21.nine | 27.one | 32.4 | 42 | 52.five | sixty three | eighty four | 86.six | 104.5 | one hundred twenty five | 167 | 208.nine | ||
Fr1(N) | 588 | 882 | 980 | 1180 | 1270 | 1760 | 1860 | 1960 | 2160 | 2450 | 2450 | 2840 | 3330 | 3430 | 3430 | ||
Fr2(N) | 196 | ||||||||||||||||
norminal ratio | five | ten | fifteen | twenty | twenty five | thirty | forty | 50 | sixty | 80 | a hundred | a hundred | one hundred twenty | a hundred and sixty | 200 | ||
.4kw | output shaft | Ø22 | Ø28 | Ø32 | |||||||||||||
n2* (r/min) | 288 | one hundred forty four | 92 | 72 | 58 | 47 | 36 | 29 | 24 | 18 | 14 | 14 | twelve | 9 | seven | ||
M2(Nm) | 50hz | twelve.9 | twenty five | 38.6 | 51.four | sixty five.4 | seventy eight.2 | 100.seven | 125.four | one hundred fifty | two hundred.4 | 206.eight | 250.7 | 301.1 | four hundred.seven | 461.eight | |
60hz | ten.7 | 20.8 | 32.1 | forty two.nine | 54.5 | sixty five.two | eighty three.nine | 104.5 | 125 | 167 | 172.three | 208.9 | 250.9 | 333.9 | 384.eight | ||
Fr1(N) | 882 | 1180 | 1370 | 1470 | 1670 | 2550 | 2840 | 3140 | 3430 | 3430 | 3430 | 4900 | 5880 | 5880 | 5880 | ||
Fr2(N) | 245 | ||||||||||||||||
norminal ratio | 5 | ten | fifteen | twenty | twenty five | 30 | forty | fifty | sixty | eighty | one hundred | one hundred | 120 | 160 | two hundred | ||
.75kw | output shaft | Ø28 | Ø32 | Ø40 | |||||||||||||
n2* (r/min) | 278 | one hundred forty | ninety four | sixty nine | fifty eight | forty six | 35 | 29 | 24 | eighteen | 14 | 14 | eleven | nine | seven | ||
M2(Nm) | 50hz | 24.6 | 48.two | seventy two.9 | 97.five | 122.1 | a hundred forty five.7 | 187.5 | 235.7 | 282.nine | 376.one | 387.9 | 439 | 527 | 703 | 764 | |
60hz | 20.five | forty.two | sixty.seven | eighty one.three | 201.eight | 121.4 | 156.three | 196.four | 235.7 | 313.4 | 323.2 | 366 | 439 | 585 | 732 | ||
Fr1(N) | 1270 | 1760 | 2160 | 2350 | 2450 | 4571 | 4210 | 4610 | 5490 | 5880 | 5880 | 7060 | 7060 | 7060 | 7060 | ||
Fr2(N) | 294 | ||||||||||||||||
norminal ratio | five | 10 | 15 | 20 | 25 | 30 | 40 | fifty | sixty | 80 | a hundred | 100 | one hundred twenty | a hundred and sixty | 200 | ||
1.5kw | output shaft | Ø32 | Ø40 | Ø50 | |||||||||||||
n2* (r/min) | 280 | a hundred and forty | ninety three | 70 | fifty five | forty seven | 34 | 27 | 24 | seventeen | fourteen | thirteen | 12 | eight | seven | ||
M2(Nm) | 50hz | forty eight.two | ninety seven.5 | one hundred forty five.7 | 193.nine | 242.one | 272 | 351 | 439 | 527 | 703 | 724 | 878 | 1060 | 1230 | 1230 | |
60hz | forty.two | eighty one.3 | 121.four | 161.6 | 201.8 | 226 | 293 | 366 | 439 | 585 | 603 | 732 | 878 | 1170 | 1230 | ||
Fr1(N) | 1760 | 2450 | 2840 | 3230 | 3820 | 5100 | 5880 | 7060 | 7060 | 7060 | 7060 | 9800 | 9800 | 9800 | 9800 | ||
Fr2(N) | 343 | ||||||||||||||||
norminal ratio | five | ten | fifteen | twenty | 25 | 30 | forty | 50 | sixty | 80 | one hundred | ||||||
2.2kw | output shaft | Ø40 | Ø50 | ||||||||||||||
n2* (r/min) | 272 | 136 | 95 | 68 | fifty four | forty five | 36 | 28 | 24 | eighteen | fourteen | ||||||
M2(Nm) | 50hz | 67 | 133 | 200 | 266 | 332 | 399 | 515 | 644 | 773 | 1571 | 1230 | |||||
60hz | fifty six | 111 | 167 | 221 | 277 | 332 | 429 | 537 | 644 | 858 | 1080 | ||||||
Fr1(N) | 2160 | 3140 | 3530 | 4571 | 4700 | 6960 | 7250 | 8620 | 9800 | 9800 | 9800 | ||||||
Fr2(N) | 392 |
Define and mounting dimension:
G3FM: 3 Stage Equipment MOTOR WITH FLANGE (n1=1400r/min) | ||||||||||||||||||||
Power kw | output shaft | ratio | A | F | I | J | M | O | O1 | P | Q | R | S | T | U | W | X | Y | Y1 | |
normal | brake | |||||||||||||||||||
.1kw | Ø18 | five-10-fifteen-twenty-twenty five-thirty-40-50 | 236 | 270 | 192.five | eleven | 16.five | a hundred and seventy | 4 | 10 | thirty | a hundred forty five | 35 | 18 | 20.five | 129 | six | 157 | eighty | eighty one |
Ø22 | sixty-eighty-100-120-160-two hundred | 262 | 296 | 197.five | 11 | 19 | 185 | four | 12 | forty | 148 | forty seven | 22 | 24.five | 129 | six | 171.five | 89.5 | 83.five | |
.2kw | Ø18 | five-10-15-twenty-25 | 267 | 270 | 192.five | eleven | 16.5 | one hundred seventy | four | 10 | 30 | one hundred forty five | 35 | eighteen | 20.five | 129 | six | 161 | 80 | 81 |
Ø22 | thirty-forty-fifty-60-eighty-a hundred | 293 | 296 | 197.5 | eleven | 19 | 185 | 4 | 12 | forty | 148 | 47 | 22 | 24.5 | 129 | six | 171.5 | 89.5 | eighty three.5 | |
Ø28 | a hundred-one hundred twenty-160-200 | 306 | 309.5 | 208.5 | 11 | 23.5 | 215 | 4 | fifteen | 45 | a hundred and seventy | fifty | 28 | 31 | 129 | eight | 198.5 | one hundred and five.5 | 88 | |
.4kw | Ø22 | 5-10-15-twenty-25 | 314 | 324.5 | 204 | eleven | 19 | 185 | 4 | twelve | 40 | 148 | forty seven | 22 | 24.5 | 139 | six | 171.5 | 89.5 | 88.5 |
Ø28 | thirty-forty-50-sixty-80-100 | 330 | 337.5 | 215 | eleven | 23.five | 215 | four | 15 | forty five | a hundred and seventy | fifty | 28 | 31 | 139 | 8 | 198.five | 105.five | 93 | |
Ø32 | a hundred-120-one hundred sixty-two hundred | 349 | 357 | 229.five | 13 | 28.5 | 250 | 4 | fifteen | fifty five | one hundred eighty | 60 | 32 | 35 | 139 | 10 | 234 | 126 | ninety eight | |
.75kw | Ø28 | five-ten-fifteen-twenty-twenty five | 350.5 | 343.five | 227.five | 11 | 23.five | 215 | 4 | fifteen | 45 | 170 | fifty | 28 | 31 | 159 | eight | 198.5 | 105.five | 103 |
Ø32 | 30-forty-50-sixty-eighty-100 | 379.5 | 387 | 242 | thirteen | 28.five | 250 | four | fifteen | 55 | a hundred and eighty | sixty | 32 | 35 | 159 | ten | 234 | 126 | 108 | |
Ø40 | 100-120-one hundred sixty-200 | 401.5 | 408.5 | 270 | eighteen | 34 | 310 | 5 | eighteen | sixty five | 230 | 71 | forty | forty three | 185 | 12 | 284 | 149 | 126.5 | |
1.5kw | Ø32 | five-10-15-20-25 | 420.five | 441 | 254 | thirteen | 28.5 | 250 | 5 | fifteen | fifty five | one hundred eighty | 60 | 32 | 35 | 185 | 10 | 234 | 126 | 121 |
Ø40 | thirty-40-50-sixty-80-a hundred | 457.5 | 478 | 270 | eighteen | 34 | 310 | 5 | eighteen | sixty five | 230 | 71 | 40 | forty three | 185 | twelve | 284 | 149 | 126.five | |
Ø50 | one hundred-one hundred twenty-160-two hundred | 485.five | 506 | 300 | 22 | forty | 360 | 5 | 25 | 75 | 270 | eighty three | 50 | fifty three.5 | 185 | fourteen | 325 | 173.five | 132.five | |
two.2kw | Ø40 | 5-ten-fifteen-20-25 | 466.five | 487 | 270 | 18 | 34 | 310 | 5 | eighteen | 65 | 230 | seventy one | 40 | 43 | 185 | twelve | 284 | 149 | 126.5 |
Ø50 | thirty-40-fifty-sixty-eighty-one hundred | 510.five | 531 | three hundred | 22 | forty | 360 | five | 25 | 75 | 270 | 83 | 50 | fifty three.five | 185 | 14 | 325 | 173.5 | 132.five |
G3LM: Three Section Equipment MOTOR WITH FOOT (n1=1400r/min) | ||||||||||||||||||||
Power kw | output shaft | ratio | A | D | E | F | J | G | H | K | P | S | T | U | V | W | X | Y | Y1 | |
standard | brake | |||||||||||||||||||
.1kw | Ø18 | five-10-fifteen-twenty-twenty five-thirty-40-50 | 236 | 270 | 40 | 110 | one hundred thirty five | 16.5 | 65 | 9 | 45 | 30 | 18 | 20.five | 129 | 183 | 6 | 133 | eighty five | 10 |
Ø22 | sixty-80-a hundred-a hundred and twenty-160-200 | 262 | 296 | sixty five | a hundred thirty | a hundred and fifty five | 19 | ninety | 11 | 55 | 40 | 22 | 24.5 | 129 | 193 | 6 | 139.five | 90 | 12 | |
.2kw | Ø18 | 5-10-fifteen-20-25 | 267 | 270 | forty | one hundred ten | one hundred thirty five | 16.5 | 65 | 9 | forty five | 30 | 18 | twenty.five | 129 | 183 | six | 133 | eighty five | 10 |
Ø22 | 30-40-fifty-60-80-one hundred | 293 | 296 | sixty five | one hundred thirty | one hundred fifty five | 19 | 90 | 11 | 55 | 40 | 22 | 24.five | 129 | 193 | 6 | 139.5 | 90 | 12 | |
Ø28 | a hundred-a hundred and twenty-a hundred and sixty-200 | 306 | 309.5 | 90 | a hundred and forty | 175 | 23.5 | a hundred twenty five | eleven | 65 | 45 | 28 | 31 | 129 | 203 | eight | a hundred and seventy | 110 | 15 | |
.4kw | Ø22 | 5-ten-15-twenty-25 | 314 | 324.5 | 65 | one hundred thirty | one hundred fifty five | 19 | ninety | eleven | fifty five | 40 | 22 | 24.5 | 139 | 199.five | 6 | 141.five | 90 | 12 |
Ø28 | thirty-forty-50-sixty-eighty-100 | 330 | 337.5 | ninety | a hundred and forty | one hundred seventy five | 23.5 | a hundred twenty five | 11 | 65 | 45 | 28 | 31 | 139 | 210 | eight | a hundred and seventy | one hundred ten | 15 | |
Ø32 | one hundred-120-a hundred and sixty-200 | 349 | 357 | one hundred thirty | a hundred and seventy | 208 | 28.5 | a hundred and seventy | 13 | 70 | 55 | 32 | 35 | 139 | 226 | 10 | 198 | 130 | eighteen | |
.75kw | Ø28 | 5-10-15-twenty-twenty five | 350.five | 343.5 | 90 | a hundred and forty | 175 | 23.5 | 125 | 11 | sixty five | forty five | 28 | 31 | 159 | 222 | eight | one hundred seventy | 110 | 15 |
Ø32 | 30-forty-fifty-60-80-one hundred | 379.5 | 387 | a hundred thirty | 170 | 208 | 28.5 | one hundred seventy | thirteen | 70 | fifty five | 32 | 35 | 159 | 238.five | ten | 198 | a hundred thirty | eighteen | |
Ø40 | a hundred-a hundred and twenty-one hundred sixty-200 | 401.five | 408.5 | a hundred and fifty | 210 | 254 | 34 | 196 | 15 | 90 | 65 | 40 | 43 | 185 | 249 | twelve | 230 | 150 | 20 | |
1.5kw | Ø32 | five-10-15-twenty-twenty five | 420.5 | 441 | a hundred thirty | a hundred and seventy | 208 | 28.five | a hundred and seventy | 13 | 70 | fifty five | 32 | 35 | 185 | 250.five | 10 | 198 | a hundred thirty | eighteen |
Ø40 | thirty-forty-fifty-60-80-one hundred | 457.five | 478 | 150 | 210 | 254 | 34 | 196 | 15 | 90 | sixty five | forty | 43 | 185 | 260 | twelve | 230 | 150 | 20 | |
Ø50 | a hundred-one hundred twenty-160-200 | 485.5 | 506 | a hundred and sixty | 230 | 290 | 40 | 210 | eighteen | one hundred | seventy five | 50 | fifty three.5 | 185 | 288 | fourteen | 265 | a hundred and seventy | twenty five | |
2.2kw | Ø40 | 5-10-fifteen-20-25 | 466.5 | 487 | 150 | 210 | 254 | 34 | 196 | fifteen | 90 | 65 | 40 | forty three | 185 | 260 | twelve | 230 | one hundred fifty | twenty |
Ø50 | thirty-40-fifty-60-80-a hundred | 510.five | 531 | one hundred sixty | 230 | 290 | 40 | 210 | eighteen | 100 | 75 | fifty | fifty three.five | 185 | 288 | 14 | 265 | 170 | 25 |
G3FS: IEC Equipment REDUCER WITH FOOT (n1=1400r/min) | |||||||||||||||||||||||||
Energy kw | output shaft | ratio | A | B | C | F | I | J | L | M | N | O | O1 | P | Q | R | S | S1 | T | T1 | W | W1 | X | Y | Y1 |
.12kw | Ø18 | five-ten-fifteen-20-25-thirty-forty-50 | 147 | ninety five | one hundred fifteen | 154 | eleven | sixteen.five | 4.5 | one hundred seventy | a hundred and forty | four | 10 | thirty | one hundred forty five | 35 | eighteen | eleven | 20.five | twelve.8 | 6 | 4 | 163 | eighty | 86.five |
Ø22 | sixty-80-a hundred-120-a hundred and sixty-two hundred | 173 | ninety five | 115 | 164 | 11 | 19 | 4.5 | 185 | 140 | 4 | 12 | 40 | 148 | forty seven | 22 | 11 | 24.5 | twelve.eight | six | 4 | 171.five | 89.5 | 89 | |
.18kw | Ø18 | five-10-fifteen-twenty-25 | 147 | ninety five | a hundred and fifteen | 154 | eleven | sixteen.five | 4.5 | a hundred and seventy | a hundred and forty | 4 | ten | thirty | a hundred forty five | 35 | eighteen | eleven | 20.5 | 12.eight | six | four | 163 | 80 | 86.5 |
Ø22 | 30-forty-fifty-sixty-eighty-100 | 173 | ninety five | one hundred fifteen | 164 | 11 | 19 | four.5 | 185 | a hundred and forty | four | 12 | 40 | 148 | forty seven | 22 | 11 | 24.5 | twelve.8 | six | 4 | 171.5 | 89.5 | 89 | |
Ø28 | one hundred-a hundred and twenty-one hundred sixty-two hundred | 186.5 | 95 | one hundred fifteen | 186 | eleven | 23.five | four.5 | 215 | 140 | 4 | 15 | forty five | one hundred seventy | fifty | 28 | eleven | 31 | 12.8 | 8 | four | 198.five | one hundred and five.five | 93.5 | |
.37kw | Ø22 | five-ten-15-20-twenty five | 181.five | one hundred ten | one hundred thirty | 164 | eleven | 19 | 4.5 | 185 | a hundred and sixty | 4 | 12 | forty | 148 | forty seven | 22 | fourteen | 24.5 | sixteen.three | six | five | 201 | 89.five | ninety nine |
Ø28 | thirty-forty-50-sixty-80-a hundred | 198 | one hundred ten | a hundred thirty | 186 | 11 | 23.5 | 4.5 | 215 | one hundred sixty | four | 15 | 45 | a hundred and seventy | 50 | 28 | fourteen | 31 | sixteen.3 | 8 | 5 | 198.5 | a hundred and five.five | 103.5 | |
Ø32 | one hundred-a hundred and twenty-a hundred and sixty-two hundred | 216.5 | a hundred and ten | 130 | 215 | 13 | 28.five | four.five | 250 | a hundred and sixty | 4 | 15 | 55 | one hundred eighty | sixty | 32 | 14 | 35 | 16.3 | 10 | five | 234 | 126 | 108.5 | |
.75kw | Ø28 | 5-10-fifteen-20-twenty five | 206.5 | one hundred thirty | one hundred sixty five | 185 | eleven | 23.5 | 4.5 | 215 | 200 | 4 | fifteen | 45 | a hundred and seventy | 50 | 28 | 19 | 31 | 21.eight | eight | six | 216.five | a hundred and five.5 | 123.five |
Ø32 | thirty-40-fifty-sixty-80-a hundred | 235 | 130 | a hundred sixty five | 215 | thirteen | 28.5 | 4.five | 250 | 200 | four | 15 | 55 | 180 | 60 | 32 | 19 | 35 | 21.8 | 10 | 6 | 236.five | 126 | 128.5 | |
Ø40 | one hundred-a hundred and twenty-a hundred and sixty-200 | 260.five | a hundred thirty | a hundred sixty five | 270 | eighteen | 34 | four.five | 310 | 200 | five | eighteen | 65 | 230 | 71 | 40 | 19 | 43 | 21.8 | 12 | eight | 284 | 149 | 134 | |
1.5kw | Ø32 | five-ten-fifteen-twenty-25 | 252 | one hundred thirty | 165 | 215 | thirteen | 28.five | four.five | 250 | 200 | 5 | 15 | 55 | 180 | sixty | 32 | 24 | 35 | 27.3 | 10 | eight | 236.five | 126 | 128.5 |
Ø40 | thirty-40-fifty-sixty-eighty-100 | 293.5 | one hundred thirty | 165 | 270 | 18 | 34 | four.five | 310 | two hundred | 5 | 18 | sixty five | 230 | 71 | 40 | 24 | forty three | 27.3 | 12 | eight | 284 | 149 | 134 | |
Ø50 | one hundred-120-a hundred and sixty-two hundred | 321.five | one hundred thirty | 165 | three hundred | 22 | forty | four.5 | 360 | 200 | five | 25 | 75 | 270 | 83 | fifty | 24 | 53.5 | 27.3 | fourteen | 8 | 323.5 | 173.5 | one hundred forty | |
2.2kw | Ø40 | 5-10-15-twenty-twenty five | 290 | one hundred eighty | 215 | 270 | 18 | 34 | five.five | 310 | 250 | five | 18 | 65 | 230 | 71 | 40 | 28 | 43 | 31.3 | 12 | eight | 284 | 149 | 134 |
Ø50 | 30-40-fifty-sixty-80-one hundred | 334 | one hundred eighty | 215 | 300 | 22 | 40 | five.5 | 360 | 250 | five | 25 | seventy five | 270 | 83 | 50 | 28 | fifty three.5 | 31.three | fourteen | eight | 323.five | 173.five | one hundred forty |
G3LS: IEC Gear REDUCER WITH FOOT (n1=1400r/min) | |||||||||||||||||||||||||
Power kw | output shaft | ratio | A | B | C | D | E | F | G | H | J | K | L | N | P | S | S1 | T | T1 | W | W1 | X | Y | Y1 | Z |
.12kw | Ø18 | five-10-15-20-twenty five-30-40-fifty | 147 | ninety five | a hundred and fifteen | 40 | a hundred and ten | one hundred thirty five | 65 | 9 | 16.five | forty five | 4.five | 140 | thirty | 18 | 11 | twenty.5 | 12.8 | 6 | four | 138.5 | 85 | ten | M8 |
Ø22 | 60-80-a hundred-one hundred twenty-a hundred and sixty-two hundred | 173 | ninety five | one hundred fifteen | sixty five | one hundred thirty | 154 | ninety | eleven | 19 | fifty five | 4.five | one hundred forty | forty | 22 | eleven | 24.five | 12.eight | six | 4 | 141 | 90 | 12 | M8 | |
.18kw | Ø18 | five-ten-15-20-twenty five | 147 | ninety five | 115 | forty | one hundred ten | a hundred thirty five | 65 | 9 | 16.5 | forty five | 4.5 | one hundred forty | 30 | 18 | eleven | twenty.five | twelve.eight | six | four | 138.five | 85 | ten | M8 |
Ø22 | thirty-forty-fifty-sixty-eighty-one hundred | 173 | 95 | 115 | 65 | a hundred thirty | 154 | ninety | 11 | 19 | fifty five | four.five | a hundred and forty | 40 | 22 | eleven | 24.5 | twelve.8 | 6 | four | 141 | ninety | twelve | M8 | |
Ø28 | a hundred-a hundred and twenty-160-two hundred | 186.5 | ninety five | one hundred fifteen | ninety | one hundred forty | a hundred seventy five | one hundred twenty five | eleven | 23.5 | 65 | four.five | one hundred forty | forty five | 28 | 11 | 31 | 12.8 | eight | four | a hundred and seventy | a hundred and ten | fifteen | M8 | |
.37kw | Ø22 | five-10-fifteen-20-25 | 181.5 | a hundred and ten | a hundred thirty | 65 | one hundred thirty | 154 | ninety | eleven | 19 | 55 | 4.five | 160 | forty | 22 | fourteen | 24.five | 16.3 | six | five | 151 | 90 | twelve | M8 |
Ø28 | thirty-forty-fifty-60-80-100 | 198 | 110 | a hundred thirty | 90 | 140 | a hundred seventy five | one hundred twenty five | eleven | 23.5 | sixty five | 4.five | a hundred and sixty | forty five | 28 | 14 | 31 | sixteen.three | 8 | 5 | 170 | a hundred and ten | fifteen | M8 | |
Ø32 | 100-one hundred twenty-one hundred sixty-200 | 216.five | a hundred and ten | 130 | 130 | one hundred seventy | 208 | 170 | 13 | 28.5 | 70 | four.5 | one hundred sixty | fifty five | 32 | fourteen | 35 | sixteen.3 | ten | 5 | 198 | a hundred thirty | 18 | M8 | |
.75kw | Ø28 | five-ten-fifteen-20-25 | 206.5 | 130 | 165 | ninety | one hundred forty | a hundred seventy five | one hundred twenty five | 11 | 23.five | 65 | 4.5 | two hundred | 45 | 28 | 19 | 31 | 21.eight | 8 | 6 | 186.5 | one hundred ten | 15 | M10 |
Ø32 | 30-forty-fifty-sixty-eighty-a hundred | 235 | one hundred thirty | one hundred sixty five | a hundred thirty | a hundred and seventy | 208 | one hundred seventy | 13 | 28.5 | 70 | four.five | 200 | fifty five | 32 | 19 | 35 | 21.eight | ten | 6 | 201.5 | one hundred thirty | 18 | M10 | |
Ø40 | 100-120-160-two hundred | 260.5 | one hundred thirty | one hundred sixty five | 150 | 210 | 254 | 196 | fifteen | 34 | ninety | 4.five | 200 | 65 | forty | 19 | forty three | 21.eight | 12 | 8 | 230 | one hundred fifty | 20 | M10 | |
1.5kw | Ø32 | 5-10-15-20-twenty five | 252 | a hundred thirty | a hundred sixty five | a hundred thirty | 170 | 208 | a hundred and seventy | 13 | 28.5 | 70 | 4.five | 200 | 55 | 32 | 24 | 35 | 27.3 | 10 | eight | 201.five | 130 | 18 | M10 |
Ø40 | 30-40-50-60-eighty-100 | 293.5 | a hundred thirty | a hundred sixty five | 150 | 210 | 254 | 196 | 15 | 34 | ninety | four.5 | 200 | 65 | 40 | 24 | 43 | 27.3 | twelve | eight | 230 | 150 | 20 | M10 | |
Ø50 | a hundred-one hundred twenty-160-two hundred | 321.5 | a hundred thirty | 165 | one hundred sixty | 230 | 290 | 210 | 18 | forty | a hundred | 4.5 | 200 | 75 | fifty | 24 | fifty three.five | 27.three | fourteen | eight | 265 | a hundred and seventy | twenty five | M10 | |
2.2kw | Ø40 | five-10-15-20-25 | 290 | one hundred eighty | 215 | one hundred fifty | 210 | 254 | 196 | 15 | 34 | 90 | five.five | 250 | sixty five | 40 | 28 | 43 | 31.3 | twelve | eight | 230 | a hundred and fifty | 20 | M12 |
Ø50 | 30-forty-fifty-60-eighty-a hundred | 334 | 180 | 215 | a hundred and sixty | 230 | 290 | 210 | 18 | 40 | a hundred | five.5 | 250 | seventy five | 50 | 28 | 53.5 | 31.three | 14 | eight | 265 | a hundred and seventy | twenty five | M12 |
Company Profile
We are a professional reducer company situated in HangCZPT, ZHangCZPTg province.Our top goods is full range of RV571-a hundred and fifty worm reducers , also provided GKM hypoid helical gearbox, GRC inline helical gearbox, Laptop models, UDL Variators and AC Motors, G3 helical equipment motor.Products are extensively used for applications this sort of as: foodstuffs, ceramics, packing, chemical compounds, pharmacy, plastics, paper-creating, design machinery, metallurgic mine, environmental security engineering, and all sorts of automatic lines, and assembly lines.With quick shipping and delivery, outstanding following-revenue support, CZPTd making facility, our items market well both at house and overseas. We have exported our reducers to Southeast Asia, CZPT CZPTpe and the Center CZPT and so on.Our goal is to build and innovate on the basis of substantial high quality, and generate a good status for reducers.
Workshop:
Exhibition
ZheCZPT PTC Truthful:
Packaging & Delivery
Soon after Revenue Provider
1.Servicing Time and Warranty:In one particular calendar year following acquiring items.
2.Other Services: Like modeling selection guidebook, installation guidebook, and problem resolution information, etc
FAQ
one.Q:Can you make as for every customer drawing?
A: Indeed, we supply CZPT provider for consumers appropriately. We can use customer’s nameplate for gearboxes.
2.Q:What is your conditions of payment ?
A: thirty% deposit before generation,balance T/T prior to shipping and delivery.
three.Q:Are you a trading organization or company?
A:We are a manufacurer with CZPTd tools and experienced workers.
four.Q:What is your manufacturing potential?
A:4000-5000 PCS/Month
five.Q:Free sample is CZPT or not?
A:Indeed, we can provide free of charge sample if consumer agree to shell out for the courier expense
six.Q:Do you have any certificate?
A:Of course, we have CE certificate and SGS certificate report.
Make contact with information:
Ms Lingel Pan
For any queries just really feel totally free ton make contact with me. Many thanks for your type attention to our firm!