Tag Archives: single screw extruder plastic

SGS Certified Manufacturer Zlyj 173 Gear Unit for Single Screw Plastic Extruder

SGS Certified Manufacturer Zlyj 173 Gear Unit for Single CZPT Plastic Extruder

SGS Qualified Maker ZLYJ 173 Gear Device for Single CZPT Extruder

Business Information
Set up in 1979, HangCZPT CZPT Manufacturing Co., Ltd. is situated in National Substantial-tech CZPT Zone of HangCZPT, ZheCZPT , China. With more than 38 years’ knowledge in study and advancement of gear transmission products, the manufacturing facility covers an spot of 87,000 square meters. CZPTcertified in 1999, we have large experienced R&D engineer team and manufacturing abilities as properly as initial-course processing and screening equipments.

Transient Introduction:
ZLYJ sequence velocity reducers are high precision hardening tooth flank transmission component with thrust bearing housing. They are made for plastic screw-rod extruder in accordance to ZBJ19009-88. The gears and axes are created of substantial power alloy steel. The gears are made by way of carburizing hardening, precision grinding. Its precision is up to Quality 6(GB10095-88). Hardness of tooth flank is HRC54-sixty two. Thrust bearing is in entrance of output hollow shaft to accommodate screw-rod back pressure forces. CZPTs, oil seals and some other regular models are quality merchandise and they can also be imported items to fulfill customers’ specifications. This kind of speed reducer has the characteristic of small volume, large load potential, steady transmission, low noise, higher performance. They homes attain levels of overseas merchandise of the very same sort and it can consider spot of them.

CZPT Parameter:

Centre Length of Reduced Pace Stage (mm)	Ratio	CZPT Diameter (mm)	Allowable Output Torque (Nm)	Allowable Axial Thrust (kN)
112 – 800	six.3 – 90	30 – 250	510 – 183600	35 – 1200

Company Info

FAQ
Are you trading company or manufacturer?
A: We are manufacturer with more than 38 years’ knowledge.
Q: How extended is your delivery time?
A: CZPTly it is inside of ten times if the items are in inventory, for goods produced as for every get, it is in 35 days following confirmation of buy.
Q: How extended should I wait for the suggestions following I send the enquiry?
A: Typically inside 12 several hours.
Q: What info must I give you to validate the item?
A: Model/Dimensions, Transmission Ratio, Velocity, Shaft instructions & Order quantity and so on.
Q: Hong long is your solution guarantee?
A: We provide twelve months warranty from departure date of the merchandise.
Q: What is your payment terms?
T/T a hundred% in CZPT for quantity considerably less than USD10000.-, 30% T/T in CZPT , balance prior to cargo for sum over USD10000.-
If you have any other inquiries, make sure you come to feel totally free to make contact with us beneath:

HOW TO Contact US?
Send your Inquiry Details in the Beneath, click “Send” Now!
Also you can speak to us by means of following ways:

Tel: 15358026079

Site: jiangchi2012.en.made-in-china.com

SGS Certified Manufacturer Zlyj 173 Gear Unit for Single CZPT Plastic Extruder

Gear Reducer for Single Screw Plastic Extruder

Gear Reducer for Single CZPT Plastic Extruder

Extruder gearbox for plastic equipment
1) Little quantity
two) Huge transmission torque
3) Large performance
4) Lower consumption

ZLYJ gearbox series are transmission devices, which are specifically designed for one-screw extruder with substantial precision, hard equipment surface area, accompany with thrust. Adopting the technical requirements stipulated in JB/T9050.1-1999, all ZLYJ gearboxes are made appropriately.
Main Characteristics:
1. The content of equipment is the higher strength alloy metal, it is created by carburizing, quenching (and other warmth treatment), gringding process at final. The gear is in high precison ( 6 quality ) and high hardness ( reaches HRC54-sixty two). Apart from, it features low sound when working.
2. It consists of substantial bearing ability thrust, which is performed dependable and can stand up to larger axial thrust.
3. All the products are dealt with by forced lubrication and cooling technique except really couple of tiny specification items.
4. ZLYJ collection gearbox is adopted by six-side processing box. Its typical installation is horizontal, but can also be transformed to vertical installation in accordance to customer’s requirment.
five. Performance transmission, reduced noise, lengthy operaton time.
Package deal

Why pick us?
A> long time knowledge and heritage
B> long time nitriding treatment and heating treatment by by itself
C>CZPTd Fanuk sequence CNC laptop-controlled milling machines
D>depth gap drilling device in 18meters duration, which guarantee the straigtnss of barrel within.
E> CAD drawing affirmation prior to start making
F> Prompt soon after sale provider
G>Land operator and registration money twenty five, 000, 000RMB

If there is any issue, you can contact with us at any time, we will reply you as before long as feasible!

Kind	Spec	Enter Electricity(kw)	N( enter)	N(output)	Output Torque	Permitted axial thrust of output shaft(KN)	CZPT Diameter	Size-diameter ratio
Kind	Spec	Enter Electricity(kw)	N( enter)	N(output)	(N@m)	Permitted axial thrust of output shaft(KN)	CZPT Diameter	Size-diameter ratio
ZLYJ	112-eight	5.5	800	one hundred	525	35	Ø35	25:01:00
	133-8	eight	800	a hundred	764	39	Ø50	twenty five:01:00
	146-ten	eleven	one thousand	100	1050	fifty four	Ø55	25:01:00
	173-ten	eighteen.five	900	90	1962	one hundred ten	Ø65	25:01:00
	200-twelve.5	30	one thousand	80	3581	one hundred fifty five	Ø75	25:01:00
	225-12.five	forty five	a thousand	80	5371	180	Ø90	25:01:00
	250-16	fifty five	1120	70	7503	192	Ø105	twenty five:01:00
	280-sixteen	seventy five	960	60	7643	258	Ø110	25:01:00
	315-sixteen	eighty five	960	60	13528	287	Ø120	twenty five:01:00
	330-sixteen	110	960	60	17507	360	Ø135	25:01:00
	375-16	132	960	sixty	21008	390	Ø150	twenty five:01:00
	395-16	185	960	sixty	29442	400	Ø160	twenty five:01:00
	420-sixteen	one hundred sixty	960	60	31831	430	Ø160	25:01:00
	420-16	220	960	sixty	31831	430	Ø170	twenty five:01:00
	450-twenty	213	one thousand	60	40640	500	Ø160/Ø170	25:01:00
	560-17	540	one thousand	50	84034	seven hundred	Ø200	25:01:00
	630-ten	540	1000	50	15712	770	Ø250	25:01:00

Gear Reducer for Single CZPT Plastic Extruder

Zlyj500 Series Single Screw Gearbox with Ratio 16 20 for Plastic Extruder

Zlyj500 Series Single CZPT CZPT with Ratio 16 20 for Plastic Extruder

ZLYJ Series One CZPT CZPT for CZPT/rubber Extruder

Transient Introduction .

one. ZLYJ series reduction gearbox is a transmission element that possesses higher precision

challenging gear floor and thrust block designed for plastic screw extruder.

2.The design of product adapts all kinds of norm specified in ZBJ19009-88/it functions

that equipment and axis components are created of high toughness alloy steel.

3.The gear is processes by carburization, quenching and tooth grinding process.

4.The precision of gear is grade 6 specified in GB1009588.

5.The hardness of gear surface is HRC54~sixty two. At front end of hollow input axis

there is large specification thrust bearing that will bear axial thrust force while

the screw is working.

six.The complete machine features compact, high in bearing capacity, stable in

transmission, low noise, high efficiency, etc.

Relevant scope
Various plastic rubber market

The enter rotation of primary mover shall be ≤1500rpm
The peripheral speed of gear drive shall be≤20m/s
The doing work ambient temperature shall be in -40°C~45°C. For each warmth the lubricating oil to previously mentioned 0°C when the ambient temperature is underneath 0°C.
Rotation is CZPT equally CZPTs and backwards.

Manufacturing unit

Business office Block

Organization Employees

Zlyj500 Series Single CZPT CZPT with Ratio 16 20 for Plastic Extruder

Jhm Series Gearbox for Single Screw Plastic Extruder

Jhm Series CZPT for Single CZPT Plastic Extruder

JHM Sequence gearbox for Solitary CZPT CZPT Extruder

Organization Information
Proven in 1979, HangCZPT CZPT Producing Co., Ltd. is located in Nationwide Large-tech CZPT Zone of HangCZPT, ZheCZPT , China. With a lot more than 38 years’ experience in study and advancement of equipment transmission goods, the manufacturing unit covers an spot of 87,000 square meters. CZPT certified in 1999, we have substantial experienced R&D engineer group and producing talents as effectively as very first-class processing and testing equipments.

Product Description
JHMZLYJZSYJ Collection gearbox is a drive device with higher-precision and challenging tooth surface and thrust bearing developed to match with screw extruders. It is developed in accordance to standard ZBJ19009-88. The principal elements are created of substantial strength alloy metal. The gears are produced by way of carburizing quenching hardening, and equipment grinding. Its precision is up to Quality 6 (GB10095-88). Thrust bearing with more than-specification is mounted on the front finish of hollow output shaft to accommodate screw back force forces. The total unit is small volume, higher have ability, steady generate, minimal noise and large performance.

FAQ
Are you investing organization or manufacturer ?
A: We are manufacturer.
Q: How extended is your supply time?
A: CZPTly it is inside 10 days if the merchandise are in inventory, for products created as for every order, it is inside 35 times following confirmation of purchase.
Q:How extended ought to I wait for the feedback right after I send the enquiry?
A: Normally Inside of 12 several hours.
Q:What details should I give you to affirm the merchandise?
A: Product/Measurement, Transmission Ratio, Pace, Shaft instructions & Order amount and many others.
Q: Hong extended is your merchandise guarantee?
A:We offer twelve months guarantee from departure date of the products.
Q: What is your payment conditions?
T/T one hundred% in CZPT for amount significantly less than USD10000.-, 30% T/T in CZPT ,harmony prior to cargo for volume previously mentioned USD10000.-
If you have any other inquiries, please come to feel free of charge to contact us underneath:

HOW TO Speak to US?
Deliver your Inquiry Details in the Underneath, simply click “Ship” Now!
Also you can make contact with us by way of pursuing techniques:

Tel: 15358026079

Site: jiangchi2012.en.manufactured-in-china.com

Jhm Series CZPT for Single CZPT Plastic Extruder

Duoling Brand Zlyj Series Gearbox for Single Screw Plastic Extruder

CZPT Brand Zlyj Series CZPT for Single CZPT Plastic Extruder

CZPT Brand name ZLYJ Collection CZPT For Single CZPT CZPT Extruder

Firm Info
Set up in 1979, HangCZPT CZPT Producing Co., Ltd. is positioned in Countrywide High-tech CZPT Zone of HangCZPT, ZheCZPT , China. With much more than 38 years’ experience in study and improvement of gear transmission goods, the manufacturing facility handles an region of 87,000 square meters. CZPT certified in 1999, we have substantial competent R&D engineer crew and producing abilities as effectively as 1st-class processing and testing equipments.

Solution Description
JHM/JHMLZLYJZSYJ Collection gearbox is a drive system with higher-precision and challenging tooth area and thrust bearing designed to match with screw extruders. It is designed in accordance to regular ZBJ19009-88. The main components are manufactured of large energy alloy metal. The gears are manufactured by way of carburizing quenching hardening, and gear grinding. Its precision is up to Grade 6 (GB10095-88). Thrust bearing with in excess of-specification is mounted on the entrance stop of hollow output shaft to accommodate screw back again stress forces. The entire unit is little quantity, higher carry capability, secure travel, reduced noise and high performance.

CZPT Parameter:

Centre distance of lower pace stage(mm)	Ratio(i)	CZPT diameter(mm)	Allowable output torque(N. m)	Allowable axial thrust(kN)
112 – 800	6.three – 90	30 – 250	510 – 183600	35 – 1200

Our manufacturing facility:

FAQ
Are you trading business or producer ?
A: We are maker.
Q: How long is your delivery time?
A: CZPTly it is inside of 10 times if the merchandise are in inventory, for items produced as per purchase, it is in 35 days soon after affirmation of order.
Q:How lengthy must I wait for the suggestions following I send the enquiry?
A: Normally In 12 hrs.
Q:What details need to I give you to verify the merchandise?
A: Model/Size, Transmission Ratio, Velocity, Shaft directions & Order quantity and so forth.
Q: Hong prolonged is your item guarantee?
A:We offer you twelve months guarantee from departure day of the products.
Q: What is your payment conditions?
T/T a hundred% in CZPT for volume considerably less than USD10000.-, thirty% T/T in CZPT ,balance prior to shipment for sum above USD10000.-
If you have any other questions, please really feel free to get in touch with us beneath:

HOW TO Contact US?
Send out your Inquiry Specifics in the Underneath, click “Deliver” Now!
Also you can get in touch with us through subsequent approaches:

Tel: 15358026079

Internet site: jiangchi2012.en.made-in-china.com

CZPT Brand Zlyj Series CZPT for Single CZPT Plastic Extruder

Zlyj Extrusion Gearbox for Single Screw Barrel Plastic Extruder

Zlyj Extrusion CZPT for Single CZPT Barrel Plastic Extruder

In depth Images

Merchandise Description

Merchandise Attributes

one, The gear is made of substantial-strength reduced-carbon alloy steel by carburizing and quenching. The hardness of
the tooth surface is up to HRC58-62. The gears are groun d grinding technologies with high precision and
good make contact with.
2, Large transmission efficiency: solitary phase is increased than 96.5%, double stage is higher than 93%, 3rd
degree is increased than 90%.
3, Clean procedure and minimal sound.
4, Small size, mild weight, lengthy services life and substantial carrying potential.
5, Straightforward to disassemble and straightforward to set up.

Our Advantages

Solution Parameters

No.

gearbox design

Ratio range

suggest screw diameter/mm

recommend electricity/HP

score load torque/N.m

dimensions(L*W*H)/mm

Net fat/KG

one

ZLYJ133

eight/12.5/sixteen/20

35/45/fifty

6~15

764

478*a hundred and seventy*260

144

ZLYJ146

10/twelve.five/16/20

forty five/fifty five

10~twenty

1165

560*250*320

205

ZLYJ173

10/16/twenty

fifty five/65

fifteen~30

1962

576*256*340

256

four

ZLYJ180

15~40

2764

650*256*four hundred

350

five

ZLYJ200

12.5/sixteen/20

65/seventy five

thirty~60

3583

750*340*480

350

six

ZLYJ225

12.5/sixteen/20

40~75

5334

800*360*five hundred

650

seven

ZLYJ250

sixteen/twelve.five/twenty

100

50~100

6306

930*380*560

815

eight

ZLYJ280

16/twelve.five/twenty

one zero five/one hundred ten

seventy five~122

7643

970*410*600

1571

nine

ZLYJ315

sixteen/twelve.five/twenty

one hundred twenty

a hundred~one hundred seventy five

11822

1160*450*700

1410

ZLYJ330

sixteen/12.5/twenty

one hundred fifty/one hundred sixty

one hundred fifty~217

21000

1160*450*seven-hundred

1520

ZLYJ375

16/twelve.five/20

150/160

217~312

21096

1280*466*800

1800

ZLYJ420

sixteen/12.five/20

a hundred and fifty/a hundred sixty five

272~428

25478

1420*550*920

1800

ZLYJ450

16/12.5/20

165

380~544

33885

1550*1200*a thousand

3560

Certifications

Firm Profile

Xihu (West Lake) Dis.ng Transmission Equipment Co., Ltd. found HangCZPT city, ZHangCZPTg, as one expert
manufacturer and exporter of cycloidal pin wheel reducer,worm reducer, gear reducer, gearbox ,
AC motor and relative spare parts, owns rich knowledge in this line for many a long time.

We are one particular immediate factory, with CZPTd production products, the powerful growth team and
creating capacity to offer you quality products for customers.

Our goods commonly served to various industries of CZPTlurgy, Chemicals, textile,drugs,wood
and so on. Main marketplaces: China, Africa,Australia,Vietnam, Turkey,Japan, Korea, Philippines…

Welcome to ask us any queries, very good provide constantly for you for long time period business.

FAQ

Q: Are you trading organization or maker?
A: We are factory.

Q: How lengthy is your shipping time?
A: CZPTly it is 5-ten days if the products are in inventory. or it is fifteen-twenty times if the products are not in inventory.

Q: Can we acquire one personal computer of every single merchandise for quality screening?
A: Of course, we are glad to acknowledge trial purchase for high quality tests.

Q:How to decide on a gearbox which satisfies your necessity?
A:You can refer to our catalogue to pick the gearbox or we can assist to pick when you offer
the technical information of essential output torque, output velocity and motor parameter and many others.

Q: What details shall we give just before positioning a buy purchase?
A:a) Type of the gearbox, ratio, enter and output variety, enter flange, mounting place, and motor informationetc.
b) Housing coloration.
c) Buy amount.
d) Other special requirements.

Zlyj Extrusion CZPT for Single CZPT Barrel Plastic Extruder

Zlyj Series Gear Box Reducer for Single Screw Plastic Extruder

Zlyj Series Gear Box Reducer for Single CZPT Plastic Extruder

ZLYJ Series gear box Reducer for Solitary CZPT CZPT Extruder

Company Data
Proven in 1979, HangCZPT CZPT Manufacturing Co., Ltd. is found in Countrywide Large-tech CZPT Zone of HangCZPT, ZheCZPT , China. With a lot more than 38 years’ encounter in study and advancement of gear transmission merchandise, the manufacturing unit handles an spot of 87,000 sq. meters. CZPT certified in 1999, we have substantial competent R&D engineer crew and production talents as effectively as very first-course processing and testing equipments.

Merchandise Description
JHMZLYJZSYJ Series gearbox is a drive system with large-precision and hard tooth surface area and thrust bearing designed to match with screw extruders. It is designed in accordance to standard ZBJ19009-88. The main areas are created of high energy alloy metal. The gears are made by way of carburizing quenching hardening, and equipment grinding. Its precision is up to Quality 6 (GB10095-88). Thrust bearing with more than-specification is mounted on the front stop of hollow output shaft to accommodate screw again force forces. The complete device is little quantity, large have potential, steady push, low sound and substantial performance.

FAQ
Are you buying and selling organization or maker ?
A: We are producer.
Q: How extended is your shipping and delivery time?
A: CZPTly it is in ten days if the goods are in stock, for products developed as for every purchase, it is inside of 35 times following confirmation of get.
Q:How extended ought to I wait for the suggestions following I send the enquiry?
A: Generally Inside of 12 hrs.
Q:What information should I give you to verify the item?
A: Product/Measurement, Transmission Ratio, Pace, Shaft directions & Order quantity and so forth.
Q: Hong extended is your product warranty?
A:We supply twelve months warranty from departure day of the items.
Q: What is your payment terms?
T/T a hundred% in CZPT for sum significantly less than USD10000.-, 30% T/T in CZPT ,stability prior to shipment for volume previously mentioned USD10000.-
If you have any other queries, make sure you feel free to get in touch with us below:

HOW TO Contact US?
Deliver your Inquiry Information in the Under, click “Ship” Now!
Also you can make contact with us by means of subsequent approaches:

Tel: 15358026079

Website: jiangchi2012.en.made-in-china.com

Zlyj Series Gear Box Reducer for Single CZPT Plastic Extruder

Jiangyin Gearbox Single Screw Extruder Gearbox for Plastic Extruding Machine

HangZhou CZPT Single CZPT Extruder CZPT for Plastic Extruding CZPT

HangCZPT CZPT Solitary CZPT Extruder CZPT for CZPT Extruding CZPT

Business Details
HangCZPT CZPT Producing Co., Ltd. registered in 1979. The firm is located at countrywide high-tech development zone, HangCZPT, ZheCZPT , China, with more than 38 years experience to focus in reserch and development equipment transmission goods. The factory addresses an region of 87,000 square meters. The business has passed CZPT quality technique certification in 1999, and was rated as high qualified R&D engineer teem and manufacturing skills as properly as initial-course processing and screening equipments.

Technical specs
one. Characterized by compact construction, light fat, large torque and superb performance, it is a new reducing transmission system with CZPTd design and manufactured on the foundation of the modularized combination, which can satisfy client’s necessity on relationship and set up.
two. Created of rib-reinforced rigid circumstance, quality alloy-steel gear that’s hardened by carbon penetration and grinded specifically, it has stable working, low noise, large loading potential, lower usage, efficient transmission temperature increase and lengthy services existence and many others.

Packaging & Shipping
Tools

Patent Certification

FAQ
Are you buying and selling company or producer ?
A: We are company with 38 years knowledge.
Q: How lengthy is your shipping and delivery time?
A: CZPTly it is within ten times if the items are in stock, for goods created as per order, it is inside 35 times after affirmation of purchase.
Q:How prolonged must I wait around for the feedback soon after I deliver the enquiry?
A: Typically Inside of twelve hours.
Q:What info ought to I give you to verify the product?
A: Product/Dimension, Transmission Ratio, Pace, Shaft directions & Order amount and so on.
Q: Hong lengthy is your merchandise warranty?
A:We supply twelve months warranty from departure day of the merchandise.
Q: What is your payment terms?
T/T a hundred% in CZPT for volume significantly less than USD10000.-, thirty% T/T in CZPT ,harmony ahead of shipment for sum over USD10000.-
If you have any other concerns, please feel free of charge to contact us underneath:
Make contact with Us

HangZhou CZPT Single CZPT Extruder CZPT for Plastic Extruding CZPT

Zlyj 200 Reduction Gearbox for Single Screw Plastic Extruder

Zlyj 200 Reduction CZPT for Single CZPT Plastic Extruder

ZLYJ Series Solitary CZPT CZPT for CZPT/rubber Extruder

Transient Introduction .

one. ZLYJ sequence reduction gearbox is a transmission portion that possesses large precision

challenging gear surface area and thrust block created for plastic screw extruder.

two.The design of product adapts all kinds of norm specified in ZBJ19009-88/it functions

that equipment and axis components are manufactured of high toughness alloy metal.

three.The gear is processes by carburization, quenching and tooth grinding process.

four.The precision of gear is grade 6 specified in GB1009588.