Tag Archives: zlyj screw

SGS Certified Manufacturer Zlyj 173 Gear Unit for Single Screw Plastic Extruder

SGS Certified Manufacturer Zlyj 173 Gear Unit for Single CZPT Plastic Extruder

SGS Qualified Maker ZLYJ 173 Gear Device for Single CZPT Extruder

Business Information
      Set up in 1979, HangCZPT CZPT Manufacturing Co., Ltd.  is situated in National Substantial-tech CZPT Zone of HangCZPT, ZheCZPT , China.  With more than 38 years’ knowledge in study and advancement of gear transmission products, the manufacturing facility covers an spot of 87,000 square meters.  CZPTcertified in 1999, we have large experienced R&D engineer team and manufacturing abilities as properly as initial-course processing and screening equipments.

Transient Introduction:
     ZLYJ sequence velocity reducers are high precision hardening tooth flank transmission component with thrust bearing housing. They are made for plastic screw-rod extruder in accordance to ZBJ19009-88. The gears and axes are created of substantial power alloy steel. The gears are made by way of carburizing hardening, precision grinding. Its precision is up to Quality 6(GB10095-88). Hardness of tooth flank is HRC54-sixty two. Thrust bearing is in entrance of output hollow shaft to accommodate screw-rod back pressure forces. CZPTs, oil seals and some other regular models are quality merchandise and they can also be imported items to fulfill customers’ specifications. This kind of speed reducer has the characteristic of small volume, large load potential, steady transmission, low noise, higher performance. They homes attain levels of overseas merchandise of the very same sort and it can consider spot of them.

CZPT Parameter:

Centre Length of Reduced Pace Stage (mm) Ratio
 		 CZPT Diameter
(mm)		 Allowable Output Torque (Nm) Allowable Axial Thrust (kN)
112 – 800 six.3 – 90 30 – 250 510 – 183600 35 – 1200

 

Company Info

 
FAQ
 Are you trading company or manufacturer?
A: We are manufacturer with more than 38 years’ knowledge.
Q: How extended is your delivery time?
A: CZPTly it is inside of ten times if the items are in inventory, for goods produced as for every get, it is in 35 days following confirmation of buy.
Q: How extended should I wait for the suggestions following I send the enquiry?
A: Typically inside 12 several hours.
Q: What info must I give you to validate the item?
A: Model/Dimensions, Transmission Ratio, Velocity, Shaft instructions & Order quantity and so on.
Q: Hong long is your solution guarantee?
A: We provide twelve months warranty from departure date of the merchandise.
Q: What is your payment terms?
 T/T a hundred% in CZPT for quantity considerably less than USD10000.-, 30% T/T in CZPT , balance prior to cargo for sum over USD10000.-
  If you have any other inquiries, make sure you come to feel totally free to make contact with us beneath:
 
HOW TO Contact US?
Send your Inquiry Details in the Beneath, click “Send” Now!
Also you can speak to us by means of following ways:
 
Tel: 15358026079
 
Site: jiangchi2012.en.made-in-china.com
 
 

 

SGS Certified Manufacturer Zlyj 173 Gear Unit for Single CZPT Plastic Extruder

Over 50 Years′ Experience Zlyj Gear Unit for Single Screw Extruder

Over 50 Years′ Experience Zlyj Gear Unit for Single CZPT Extruder

Over fifty Years’ Knowledge ZLYJ Gear Device for Single CZPT Extruder

Firm Information
 
     Set up in 1979, HangCZPT CZPT Production Co., Ltd.  is positioned in Countrywide Higher-tech CZPT Zone of HangCZPT, ZheCZPT , China.  With much more than 38 years’ knowledge in analysis and growth of equipment transmission merchandise, the factory handles an spot of 87,000 square meters.  CZPTcertified in 1999, we have large experienced R&D engineer group and production skills as well as initial-class processing and tests equipments.
 
Product Description
Extruder gear containers are specifically designed equipment box for rubber and plastic market.

Characteristic Attributes:

one. The optimum operational reliablity
2. Higher electrical power capatity and absorption of substantial torque and axial pressure

 
FAQ
 Are you buying and selling organization or maker?
A: We are company with above 38 years’ knowledge.
Q: How prolonged is your shipping and delivery time?
A: CZPTly it is inside of 10 days if the goods are in stock, for items produced as for every buy, it is inside of 35 times soon after affirmation of purchase.
Q: How prolonged must I wait for the opinions after I send the enquiry?
A: Normally inside twelve hrs.
Q: What details ought to I give you to confirm the merchandise?
A: Product/Measurement, Transmission Ratio, Speed, Shaft directions & Order quantity etc.
Q: Hong long is your merchandise warranty?
A: We provide 12 months warranty from departure day of the merchandise.
Q: What is your payment terms?
 T/T a hundred% in CZPT for sum considerably less than USD10000.-, 30% T/T in CZPT , balance prior to cargo for quantity earlier mentioned USD10000.-
  If you have any other questions, remember to really feel free to contact us beneath:
 
HOW TO Contact US?
Ship your Inquiry Details in the Below, simply click “Send” Now!
Also you can make contact with us through subsequent approaches:
 
 
 Tel: -1525 571 15
 
 

Over 50 Years′ Experience Zlyj Gear Unit for Single CZPT Extruder

High Loading Capacity Zlyj 630 Gear Reducer for Single Screw Extruder

High Loading Capacity Zlyj 630 Gear Reducer for Single CZPT Extruder

Higher Loading Potential ZLYJ 630 Equipment Reducer for One CZPT Extruder

Firm Information
      Established in 1979, HangCZPT CZPT Producing Co., Ltd.  is found in Nationwide Higher-tech CZPT Zone of HangCZPT, ZheCZPT , China.  With a lot more than 38 years’ experience in research and advancement of equipment transmission items, the manufacturing facility covers an area of 87,000 sq. meters.  CZPTcertified in 1999, we have high certified R&D engineer team and production skills as properly as initial-course processing and tests equipments.
Solution Functions
     ZLYJ sequence speed reducers are high precision hardening tooth flank transmission element with thrust bearing housing. They are designed for plastic screw-rod extruder according to ZBJ19009-88. The gears and axes are created of substantial strength alloy steel. The gears are manufactured by way of carburizing hardening, precision grinding. Its precision is up to Quality six(GB10095-88). Hardness of tooth flank is HRC54-sixty two. Thrust bearing is in front of output hollow shaft to accommodate screw-rod back again stress forces. CZPTs, oil seals and some other normal units are top quality goods and they can also be imported goods to fulfill customers’ requirements. This kind of velocity reducer has the characteristic of small volume, higher load ability, secure transmission, minimal sound, higher performance. They qualities reach ranges of overseas goods of the same kind and it can just take location of them.

Functioning Conditions:
one. Input shaft rotation pace is not far more than 1500r/min.
two. Its ambient temperature variety is inside 0 to 35 centigrade. If it is reduce than 0 centigrade, pre-heating of the lubricant will be required before start-up, although cooling is proposed in situation of a temperature higher than 35 centigrade.
HOW TO Speak to US?
Send out your Inquiry Specifics in the Under, simply click “Send” Now!
Also you can make contact with us by way of following approaches:
 
Tel : 15358026079
 
Website:

 

High Loading Capacity Zlyj 630 Gear Reducer for Single CZPT Extruder

High Efficiency Zlyj 450 Gear Reducer for Single Screw Extruder

High Efficiency Zlyj 450 Gear Reducer for Single CZPT Extruder

Substantial Efficiency ZLYJ 450 Equipment Reducer for Single CZPT Extruder

Organization Information
      Set up in 1979, HangCZPT CZPT Production Co., Ltd.  is positioned in Nationwide Substantial-tech CZPT Zone of HangCZPT, ZheCZPT , China.  With a lot more than 38 years’ expertise in research and growth of equipment transmission merchandise, the manufacturing unit addresses an area of 87,000 square meters.  CZPTcertified in 1999, we have higher qualified R&D engineer team and production skills as nicely as first-class processing and testing equipments.
Product Features
     ZLYJ series pace reducers are higher precision hardening tooth flank transmission portion with thrust bearing housing. They are created for plastic screw-rod extruder according to ZBJ19009-88. The gears and axes are created of higher power alloy steel. The gears are manufactured by way of carburizing hardening, precision grinding. Its precision is up to Quality six(GB10095-88). Hardness of tooth flank is HRC54-sixty two. Thrust bearing is in entrance of output hollow shaft to accommodate screw-rod back again strain forces. CZPTs, oil seals and some other standard units are good quality merchandise and they can also be imported items to meet up with customers’ needs. This type of pace reducer has the attribute of little quantity, substantial load ability, stable transmission, lower noise, large performance. They properties reach ranges of international goods of the very same variety and it can just take area of them.

Doing work Circumstances:
one. Input shaft rotation pace is not far more than 1500r/min.
2. Its ambient temperature range is inside of 0 to 35 centigrade. If it is lower than 0 centigrade, pre-heating of the lubricant will be necessary ahead of start off-up, whilst cooling is proposed in scenario of a temperature larger than 35 centigrade.
HOW TO Make contact with US?
Send your Inquiry Specifics in the Below, simply click “Send” Now!
Also you can get in touch with us by way of following ways:
 
Tel : 15358026079
 
Website:

 

High Efficiency Zlyj 450 Gear Reducer for Single CZPT Extruder

Duoling Brand Zlyj 315 Speed Reducer for Single Screw Extruder

CZPT Brand Zlyj 315 Speed Reducer for Single CZPT Extruder

CZPT Brand  ZLYJ 315 Velocity Reducer for One CZPT Extruder

Organization Data
      Established in 1979, HangCZPT CZPT Production Co., Ltd.  is positioned in Countrywide Higher-tech CZPT Zone of HangCZPT, ZheCZPT , China.  With far more than 38 years’ expertise in research and advancement of gear transmission merchandise, the manufacturing facility handles an area of 87,000 square meters.  CZPTcertified in 1999, we have higher competent R&D engineer team and production skills as well as 1st-class processing and tests equipments.
Merchandise Functions
     ZLYJ series speed reducers are high precision hardening tooth flank transmission element with thrust bearing housing. They are made for plastic screw-rod extruder according to ZBJ19009-88. The gears and axes are created of substantial energy alloy metal. The gears are manufactured by way of carburizing hardening, precision grinding. Its precision is up to Grade six(GB10095-88). Hardness of tooth flank is HRC54-sixty two. Thrust bearing is in entrance of output hollow shaft to accommodate screw-rod back stress forces. CZPTs, oil seals and some other common units are high quality merchandise and they can also be imported goods to fulfill customers’ needs. This sort of pace reducer has the characteristic of little quantity, high load ability, secure transmission, reduced sound, substantial efficiency. They houses reach stages of foreign items of the identical variety and it can consider spot of them.

Operating Problems:
one. Input shaft rotation pace is not much more than 1500r/min.
2. Its ambient temperature assortment is within 0 to 35 centigrade. If it is decrease than 0 centigrade, pre-heating of the lubricant will be essential just before start-up, even though cooling is advised in scenario of a temperature larger than 35 centigrade.
HOW TO Make contact with US?
Send out your Inquiry Specifics in the Beneath, simply click “Ship” Now!
Also you can get in touch with us by means of following techniques:
 
Tel : 15358026079
 
Site:

 

CZPT Brand Zlyj 315 Speed Reducer for Single CZPT Extruder

Duoling Brand Zlyj 250 Speed Reducer for Single Screw Extrusion

CZPT Brand Zlyj 250 Speed Reducer for Single CZPT Extrusion

CZPT Model ZLYJ 250 Speed Reducer for One CZPT Extrusion

Firm Info
      Set up in 1979, HangCZPT CZPT Production Co., Ltd.  is located in Nationwide Substantial-tech CZPT Zone of HangCZPT, ZheCZPT , China.  With much more than 38 years’ experience in research and advancement of equipment transmission merchandise, the manufacturing unit handles an area of 87,000 sq. meters.  CZPTcertified in 1999, we have large certified R&D engineer team and production abilities as well as very first-class processing and testing equipments.
Solution Functions
     ZLYJ collection velocity reducers are substantial precision hardening tooth flank transmission part with thrust bearing housing. They are designed for plastic screw-rod extruder according to ZBJ19009-88. The gears and axes are made of higher power alloy steel. The gears are created by way of carburizing hardening, precision grinding. Its precision is up to Quality six(GB10095-88). Hardness of tooth flank is HRC54-sixty two. Thrust bearing is in front of output hollow shaft to accommodate screw-rod again pressure forces. CZPTs, oil seals and some other standard units are high quality items and they can also be imported goods to satisfy customers’ needs. This kind of speed reducer has the characteristic of tiny quantity, substantial load capacity, stable transmission, low sound, large efficiency. They homes achieve stages of overseas goods of the very same type and it can consider spot of them.

Operating Problems:
one. Enter shaft rotation pace is not a lot more than 1500r/min.
two. Its ambient temperature assortment is inside of 0 to 35 centigrade. If it is reduce than 0 centigrade, pre-heating of the lubricant will be essential just before commence-up, whilst cooling is advised in circumstance of a temperature greater than 35 centigrade.
HOW TO Speak to US?
Send out your Inquiry Information in the Under, click “Deliver” Now!
Also you can make contact with us through following approaches:
 
Tel : 15358026079
 
Web site:

 

CZPT Brand Zlyj 250 Speed Reducer for Single CZPT Extrusion

Zlyj Series Speed Reducer for Single Screw Extrusion

Zlyj Series Speed Reducer for Single CZPT Extrusion

ZLYJ Series Speed Reducer for One CZPT Extrusion

Organization Data
      Established in 1979, HangCZPT CZPT Production Co., Ltd.  is positioned in Countrywide Large-tech CZPT Zone of HangCZPT, ZheCZPT , China.  With far more than 38 years’ experience in research and improvement of gear transmission goods, the manufacturing unit addresses an region of 87,000 square meters.  CZPTcertified in 1999, we have high competent R&D engineer team and producing talents as well as very first-course processing and testing equipments.
Item Functions
     ZLYJ series pace reducers are high precision hardening tooth flank transmission portion with thrust bearing housing. They are created for plastic screw-rod extruder in accordance to ZBJ19009-88. The gears and axes are made of high energy alloy steel. The gears are made by way of carburizing hardening, precision grinding. Its precision is up to Grade six(GB10095-88). Hardness of tooth flank is HRC54-sixty two. Thrust bearing is in entrance of output hollow shaft to accommodate screw-rod back strain forces. CZPTs, oil seals and some other standard models are high quality products and they can also be imported merchandise to meet customers’ requirements. This kind of speed reducer has the attribute of tiny volume, high load potential, secure transmission, low sounds, higher performance. They homes get to stages of foreign merchandise of the very same kind and it can get area of them.

Functioning Problems:
1. Enter shaft rotation velocity is not more than 1500r/min.
2. Its ambient temperature variety is inside of to 35 centigrade. If it is reduce than centigrade, pre-heating of the lubricant will be needed ahead of commence-up, although cooling is proposed in scenario of a temperature increased than 35 centigrade.

Zlyj Series Speed Reducer for Single CZPT Extrusion

Hot Selling Zlyj Series Gerabox for Single Screw Extruder

Hot Selling Zlyj Series Gerabox for Single CZPT Extruder

Hot Selling ZLYJ Series  Gerabox for One CZPT Extruder 

Business Information
      Established in 1979, HangCZPT CZPT Producing Co., Ltd.  is situated in Nationwide Large-tech CZPT Zone of HangCZPT, ZheCZPT , China.  With much more than 38 years’ encounter in study and development of equipment transmission merchandise, the factory addresses an region of 87,000 square meters.  CZPTcertified in 1999, we have substantial experienced R&D engineer team and producing abilities as properly as first-course processing and testing equipments.
 
Merchandise Description
    ZLYJ sequence pace reducers are substantial precision hardening tooth flank transmission element with thrust bearing housing. They are created for plastic screw-rod extruder according to ZBJ19009-88.
    The gears and axes are manufactured of higher strength alloy metal. The gears are manufactured by way of carburizing hardening, precision grinding. Its precision is up to Grade six(GB10095-88). Hardness of tooth flank is HRC54-62. Thrust bearing is in front of output hollow shaft to accommodate screw-rod back strain forces. CZPTs, oil seals and some other standard models are good quality items and they can also be imported products to satisfy customers’ specifications.
    This sort of velocity reducer has the characteristic of tiny volume, large load potential, secure transmission, reduced noise, higher performance. They houses attain levels of overseas merchandise of the very same kind and it can just take area of them.

Doing work Situations:
1. Enter shaft rotation pace is not far more than 1500r/min.
2. The ambient temperature range is inside 0 to 35 centigrade. If it is lower than 0 Celsius diploma pre-heating of the lubricant will be necessary ahead of begin-up, whilst cooling is proposed if temperature is greater than 35Celsius diploma.

CZPT Parameter

  Centre Distance of reduced speed phase   Ratio(i ) Match CZPT Diameter(mm)    Nominal Output Torque(N. m)   Allowable Axial CZPT(KW)
  112-710   6.three-ninety   30-250   510-183600   35-1200

 
FAQ
 Are you investing firm or maker?
A: We are maker with more than 38 years’ knowledge.
Q: How extended is your shipping and delivery time?
A: CZPTly it is inside of ten times if the goods are in stock, for goods made as for each get, it is inside 35 days soon after affirmation of purchase.
Q: How extended should I wait for the opinions after I send the enquiry?
A: Normally within twelve hours.
Q: What information ought to I give you to affirm the product?
A: Design/Measurement, Transmission Ratio, Speed, Shaft directions & Order quantity and many others.
Q: Hong lengthy is your merchandise guarantee?
A: We provide 12 months warranty from departure date of the goods.
Q: What is your payment terms?
 T/T one hundred% in CZPT for volume less than USD10000.-, 30% T/T in CZPT , balance just before shipment for volume above USD10000.-
  If you have any other concerns, remember to feel free of charge to get in touch with us underneath:

 
HOW TO Make contact with US?
Send out your Inquiry Details in the Underneath, click “Ship” Now!
Also you can contact us by means of subsequent methods:
 
Tel: 15358026079
 
Site: jiangchi2012.en.made-in-china.com
 

Hot Selling Zlyj Series Gerabox for Single CZPT Extruder

SGS Certified Manufacturer Zlyj 133 Gear Unit for Single Screw Extruder

SGS Certified Manufacturer Zlyj 133 Gear Unit for Single CZPT Extruder

SGS Accredited Manufacturer ZLYJ 133 Equipment Device for One CZPT Extruder

Organization Data
      Recognized in 1979, HangCZPT CZPT Manufacturing Co., Ltd.  is positioned in Nationwide High-tech CZPT Zone of HangCZPT, ZheCZPT , China.  With much more than 38 years’ experience in study and growth of gear transmission items, the factory handles an location of 87,000 sq. meters.  CZPTcertified in 1999, we have substantial competent R&D engineer staff and production abilities as well as initial-class processing and tests equipments.

Transient Introduction:
     ZLYJ collection speed reducers are high precision hardening tooth flank transmission part with thrust bearing housing. They are designed for plastic screw-rod extruder according to ZBJ19009-88. The gears and axes are made of substantial power alloy metal. The gears are created by way of carburizing hardening, precision grinding. Its precision is up to Grade 6(GB10095-88). Hardness of tooth flank is HRC54-62. Thrust bearing is in front of output hollow shaft to accommodate screw-rod back again stress forces. CZPTs, oil seals and some other standard units are quality products and they can also be imported merchandise to meet up with customers’ specifications. This kind of pace reducer has the characteristic of modest quantity, substantial load potential, stable transmission, reduced noise, substantial performance. They properties achieve stages of overseas goods of the very same sort and it can just take area of them.

CZPT Parameter:

Centre Distance of Minimal Pace Stage (mm) Ratio
 		 CZPT Diameter
(mm)		 Allowable Output Torque (Nm) Allowable Axial Thrust (kN)
112 – 800 six.three – 90 30 – 250 510 – 183600 35 – 1200

 

Company Data

 
FAQ
 Are you investing business or maker?
A: We are manufacturer with over 38 years’ encounter.
Q: How extended is your shipping time?
A: CZPTly it is inside of ten days if the merchandise are in stock, for products made as for every order, it is inside 35 days after confirmation of buy.
Q: How extended ought to I wait for the suggestions right after I send the enquiry?
A: Generally inside 12 hours.
Q: What information ought to I give you to verify the solution?
A: Design/Size, Transmission Ratio, Velocity, Shaft instructions & Order amount etc.
Q: Hong long is your item guarantee?
A: We supply twelve months warranty from departure day of the products.
Q: What is your payment phrases?
 T/T a hundred% in CZPT for amount less than USD10000.-, thirty% T/T in CZPT , balance prior to cargo for volume earlier mentioned USD10000.-
  If you have any other inquiries, remember to feel totally free to get in touch with us under:
 
HOW TO Speak to US?
Ship your Inquiry Information in the Below, simply click “Send” Now!
Also you can make contact with us through pursuing methods:
 
Tel: 15358026079
 
Web site: jiangchi2012.en.produced-in-china.com
 
 

 

SGS Certified Manufacturer Zlyj 133 Gear Unit for Single CZPT Extruder

Duoling Brand Zlyj 375 Gearbox Reducer for Single Screw Extruder

CZPT Brand Zlyj 375 CZPT Reducer for Single CZPT Extruder

CZPT Model ZLYJ 375 CZPT Reducer for Single CZPT Extruder

Firm Info
      Established in 1979, HangCZPT CZPT Production Co., Ltd.  is located in Countrywide Substantial-tech CZPT Zone of HangCZPT, ZheCZPT , China.  With more than 38 years’ expertise in research and advancement of gear transmission products, the manufacturing facility addresses an region of 87,000 sq. meters.  CZPTcertified in 1999, we have higher competent R&D engineer team and manufacturing skills as effectively as very first-class processing and testing equipments.
Solution Features
     ZLYJ collection speed reducers are higher precision hardening tooth flank transmission part with thrust bearing housing. They are designed for plastic screw-rod extruder in accordance to ZBJ19009-88. The gears and axes are made of large energy alloy steel. The gears are created by way of carburizing hardening, precision grinding. Its precision is up to Quality six(GB10095-88). Hardness of tooth flank is HRC54-sixty two. Thrust bearing is in front of output hollow shaft to accommodate screw-rod back pressure forces. CZPTs, oil seals and some other standard models are high quality items and they can also be imported products to fulfill customers’ specifications. This sort of velocity reducer has the attribute of small quantity, higher load potential, stable transmission, low sounds, higher effectiveness. They homes attain levels of overseas items of the exact same variety and it can take place of them.

Doing work Conditions:
1. Input shaft rotation pace is not much more than 1500r/min.
2. Its ambient temperature variety is in 0 to 35 centigrade. If it is reduce than 0 centigrade, pre-heating of the lubricant will be necessary just before start-up, even though cooling is proposed in situation of a temperature higher than 35 centigrade.
HOW TO Speak to US?
Send out your Inquiry Specifics in the Beneath, click on “Ship” Now!
Also you can contact us via following approaches:
 
Tel : 15358026079
 
Website:

 

CZPT Brand Zlyj 375 CZPT Reducer for Single CZPT Extruder