ZD 18.three~fifty.7 N.M Allowable Output Torque High CZPT 98mm ZDR Collection Planetary CZPT
Solution Description
ZDR collection planetary gearbox has adopted helical equipment design and style, so the meshing of gears can be smoother. This sequence has a double-supported and sealed framework, less difficult to install for buyers. It is widely employed in linear manipulators, packaging machinery, assembly strains and and so forth. The maximum backlash of the ZDR sequence is less than 5 arc.min and the reduction ratio covers three~eighty one.
The Product Advantages of Planetary CZPT:
one.Versatile structure style, in line with numerous doing work circumstances.
2.Ring gear processing technological innovation: Utilizing internal gear slotting machine and hobbing machine the precision of ring gear after processing can reach GB7.
3.Hardened equipment secondary scraping technological innovation: secondary substantial-velocity dry chopping of gear eliminates gear deformation induced by warmth therapy. Equipment precision can get to GB6.
four.CZPT backlash testing.
How to Read:
98 ZDR 20 ( ) (S) – 750 T1 ( )
a b c d e f g h
| a | Frame Dimensions | 98 =98mm |
| b | Series code:ZDR | Oblique tooth precision |
| c | Reduction Ratio | Single Stage: 3,4,five,6,7,8,9,10 Two Stages: 15,20,25,35,45,81. |
| d | Backlash | Solitary Phase: 8arc.min Two Phases: 12arc.min |
| e | Input shaft type | S:Total locking(Omission)(no matter whether or not the motor with keyway can use it. But D Reduce can’t use) S1:Locking with locking ring(irrespective no matter whether the motor with keyway can use it. But D Reduce can’t use) S2:Locking with keyway (input shaft with key) K:With keyway A:0ther kind (please speak to with us) |
| f | Relevant servo motor electrical power (W),Please make contact with us for particular energy | |
| g | Remember to speak to us for the mouting type of the flang | |
| h | Make sure you contact us for the product of servo motor | |
Spesifications & Specifics
When input speed is 3000rpm
| Item NO. | Reduction Ratio | Motor | Output Shaft Speed (rpm) | CZPT Output Torque (N.m) | Instantaneous max.Output Torque (N.m) | Permissible Radial Load (N) | Permissible Axial Load (N) | Internal Instant Ohnertia Of Input Shaftconversion (x10-4 kg.m2) | Perrmissible Output Torque (N.m) | Instantaneous Max. Permissible Output Torque (N.m) |
| 98ZDR | three | one thousand | one thousand | seven.55 | 22.eight | 882 | 441 | two.forty three | 18.3 | fifty four.9 |
| 1500 | 12.three | 37.1 | ||||||||
| 2000 | seventeen.two | 51.5 | ||||||||
| five | one thousand | 600 | 13.four | forty.5 | 1080 | 539 | 1.eighty five | 23.five | 70.6 | |
| 1500 | 21.five | 64.four | ||||||||
| 9 | 750 | 333 | 18.2 | 54.seven | 1470 | 735 | .650 | 18.two | fifty four.seven |
Note1) The moment of enter shaft conversion is only obtained from the reducer, so it does not incorporate instant of inertia of the motor.
Note2) The max. input velocity is 5000rpm. Typically established to 3000rpm or much less.
Note3) The permissble radial load is indicated on the centre of the output shaft.
Note4) All values are within the selection corresponding to helical equipment.
When input velocity is 3000rpm
| Item NO. | Reduction Ratio | Motor | Output Shaft Velocity (rpm) | CZPT Output Torque (N.m) | Instantaneous max.Output Torque (N.m) | Permissible Radial Load (N) | Permissible Axial Load (N) | Internal Instant Ohnertia Of Enter Shaftconversion (x10-4 kg.m2) | Perrmissible Output Torque (N.m) | Instantaneous Max. Permissible Output Torque (N.m) |
| 98ZDR | 15 | 750 | 200 | thirty.4 | ninety one.two | 1760 | 882 | .seven hundred | thirty.four | ninety one.2 |
| twenty | 750 | a hundred and fifty | forty.6 | 122 | 1910 | 955 | .690 | forty.6 | 122 | |
| twenty five | 750 | a hundred and twenty | 50.7 | 152 | 2060 | 1030 | .680 | fifty.seven | 152 | |
| 35 | 400 | 85 | 37. | 111 | 2060 | 1030 | .269 | 37. | 111 | |
| 45 | 200 | sixty six | 21.one | 63.five | 2060 | 1030 | .5716 | 28.three | 85.2 | |
| 81 | one hundred | 37 | fourteen. | 42. | 2060 | 1030 | .030 | seventeen.8 | fifty three.five |
Note1) The minute of enter shaft conversion is only gained from the reducer, so it does not include minute of inertia of the motor.
Note2) The max, enter pace is 5000rpm. Generally established to 3000rpm or less.
Note3) The permissble radial load is indicated on the centre of the output shaft.
Note4) All values are in the assortment corresponding to helical gear.
When enter velocity is 2000rpm
| Product NO. | Reduction Ratio | Motor | Output Shaft Velocity (rpm) | CZPT Output Torque (N.m) | Instantaneous max.Output Torque (N.m) | Permissible Radial Load (N) | Permissible Axial Load (N) | Inner Minute Ohnertia Of Input Shaftconversion (x10-4 kg.m2) | Perrmissible Output Torque (N.m) | Instantaneous Max. Permissible Output Torque (N.m) |
| 98ZDR | 3 | 750 | 666 | 8.73 | 26.two | 1571 | 505 | two.43 | eighteen.3 | fifty four.nine |
| 1000 | twelve.3 | 37.one | ||||||||
| 1500 | 18.3 | 54.nine | ||||||||
| five | 750 | four hundred | 15.five | forty six.five | 1230 | 615 | 1.eighty five | 23.five | 70.6 | |
| 1000 | 21.5 | 64.four | ||||||||
| nine | 400 | 222 | 14. | forty one.9 | 1680 | 840 | .650 | eighteen.two | 54.seven | |
| 15 | four hundred | 133 | 23.3 | sixty nine.8 | 2571 | 1571 | .seven-hundred | thirty.four | ninety one.two | |
| twenty | 400 | a hundred | 31. | ninety three.one | 2180 | 1090 | .294 | forty.6 | 122 | |
| twenty five | 400 | eighty. | 38.eight | 116 | 2060 | 1030 | .680 | fifty.7 | 152 | |
| 35 | 200 | fifty seven. | 22. | sixty six. | 2340 | 1170 | .269 | 37. | 111 | |
| 45 | 100 | 44.4 | fourteen. | 42.1 | 2060 | 1030 | .5715 | 28.three | eighty five.two | |
| two hundred | 28.three | 85.2 | ||||||||
| eighty one | 100 | 24.six | seventeen.8 | fifty three.five | 2060 | 1030 | .0300 | seventeen.eight | 53.five |
Note1) The instant of enter shaft conversion is only acquired from the reducer, so it does not include instant of inertia of the motor.
Note2) The permissble radial load is indicated on the center of the output shaft.
Note3) All values are inside of the variety corresponding to helical equipment.
Dimensions (Unit: mm):
| Merchandise NO. | Reduction Ratio | Motor | Overall Size L | Output Shaft | Flange | |||||||||||||
| CZPT- made MSMA |
Yaskawa-created SGMASH SGMSH | Mitsubishi-made HC-KFS HC-RFS |
LR | S | Q | QM | QM | W×U | T | D | LB | LE | LA | LZ | X | |||
| 98ZDR | 81 | 100 | 158 | 61 | 24 | forty | 35 | M6(depth)20 | 8×27 | seven | 100 | ninety | 5 | 115 | M8 | twenty | ||
| 45 | two hundred | 165 | ||||||||||||||||
| 35 | four hundred | |||||||||||||||||
| 9 | 750 | 158.5 | ||||||||||||||||
| 15,20,25 | 750 | 171 | ||||||||||||||||
| three,5 | 1000 | 177 | ||||||||||||||||
| three,five | 1500 | |||||||||||||||||
| three | 2000 | |||||||||||||||||
Note1) Please inquire to us if motor product is not regular (Matching motor checklist). (The flange dimension may possibly be diverse if motor assension is diverse.)
Note2) Rotation of the output shaft is in the same path as that of motor input.
Note3) All values are within the variety corresponding to helical gear.
Mechanism
CZPT assistance mechanism
1.The planetary equipment is positioned in the center of the output shaft.
2.The output shaft bearing is placed at equally ends of the planetary gear.
3.Individual sunshine gear and coupling.
Compact output shaft system
It adopts the design and style of output shaft integrated method, compact framework, large rigidity, and it can stand up to big effect. Place the input coupling and the solar equipment at the middle of the output shaft to improve the concentricity of the components, thereby effectively managing the equipment clearance and bettering the backlash of the whole gearbox.
Composition
Total needle framework
The interior bearing of the planetary gear adopts a total-needle design and style, the internal hole is made by a grinding approach, the surface hardness is HRC60, and the cylindricity is considerably less than .003mm.
Ring equipment framework
The integral composition of the ring equipment and the output flange enhances its rigidity and reduces misassembly.
Other Product Sort of ZDR Collection
Far more goods,remember to click listed here…
Organization Profile
Supply
Our Solutions
one.Routine maintenance time & Warranty: one yr soon after leaving factory.
2.Other services: Like modeling selection guidebook, set up manual, and difficulty shooting information, etc.
FAQ
Q: What’re your principal items?
A: We at the moment generate Brushed DC Motors, Brushed DC Equipment Motors, Planetary DC Gear Motors, Brushless DC Motors, AC Motors, Substantial CZPT Planetary CZPT and CZPT Cycloidal CZPT and many others.. You can examine the technical specs for above motors on our website and you can electronic mail us to suggest necessary motors for every your specification way too.
Q: How to decide on a appropriate motor or gearbox?
A:If you have motor images or drawings to present us, or you have detailed specs, such as, voltage, pace, torque, motor dimension, doing work mode of the motor, needed life span and noise amount and so forth, please do not be reluctant to let us know, then we can suggest suitable motor for every your request appropriately.
Q: Do you have a CZPT services for your regular motors or gearboxes?
A: Indeed, we can personalize for each your ask for for the voltage, speed, torque and shaft dimension/form. If you need further wires/cables soldered on the terminal or need to have to incorporate connectors, or capacitors or EMC we can make it as well.
Q: Do you have an individual layout provider for motors?
A: Indeed, we would like to design motors individually for our clients, but some type of molds are necessory to be developped which could need to have precise expense and design charging.
Q: What’s your direct time?
A: CZPTly speaking, our normal regular item will want 15-30days, a little bit for a longer time for CZPT products. But we are very flexible on the lead time, it will count on the distinct orders.
