ZD 5r/m .16KW 150BX RVE Series Large CZPT Cycloidal CZPT For Robot Arm
Product Description
RVE series is our regular series, from 150BX to 320BX, a whole of six designs, reduction ratio from 41 to 185. CZPT Cycloidal CZPT are widely employed in robotic arms, ATC, health care equipment and AGV drives,and many others.
The principal characteristics of CZPT Cycloidal CZPT:
1. Higher precision: backlash accuracy is significantly less than one arc.min, complete transmission precision is considerably less than 1 arc.min, and rotation repeatability is significantly less than 20 seconds.
two. Very good rigidity and little backlash can defeat the jitter when the huge inertia system starts and stops. It has strong effect resistance, robust anti-interference capacity, and can withstand influence 5 times the rated torque.
3. Small backlash, stable rotation. Be ready to start and stop at any stage of 360 degrees. CZPT response, small hysteresis, and correct inHangCZPT.
4. Adaptable application, diverse transmission and installation techniques.
How to Read through:
a hundred and fifty BX 81 RVE A B ( )
a b c d e f g
| a | Frame Size | 150 = 145mm |
| b | Series code:BX | CZPT Cycloidal CZPT series |
| c | Reduction Ratio | RVE type: With no Flange: 81,one hundred and five,121,141,161 REA variety: With Flange: forty one,fifty seven,81,105,121,141,161 |
| d | Type Code of CZPT | RVE: Primary shaft bulit-in sort RVC: Hollow sort REA: RVE kind wiith flange RCA: RVC kind with flange |
| e | Input shaft kind | A: CZPT type A (See drawings and table below) B: CZPT variety B (See drawings and desk beneath) Z: Special ordering type W: None. TB: For RVC serices (Enter with synchronous pulley) |
| f | Method of Mounting | B: Mounted by bolt (output shaft) P: Mounted by bolt and locating pines with each other (output shaft) |
| g | Diameter of motor shaft | |
Spesifications
Proportions(Unit: mm):
| Output Pace | 5r/m | 15r/m | 25r/m | 30r/m | Optimum Allowable Output Speed r/min |
|||||
| Output Torque N.m | Enter Power KW |
Output Torque N.m | Enter Power KW | Effiency % |
Output Torque N.m |
Input Electricity KW | Output Torque N.m |
Enter Electrical power KW |
||
| 150BX | 245 | .16 | 196 | .385 | 80 | 153 | .5 | 153 | .6 | seventy five |
Note: The rated torque is the output torque when the output pace is 18 r/min.
The input power have experienced the efficiency of the gearbox deemed.
| Undertaking | Ratio | Allowable Torque N.m |
Torsional Rigidity N.m /(arc.min) |
Instantaneous Max. Torque N.m |
Transmission Precision arc.min | Backlash arc.min | Daily life | Instant of Inertia(I=GD²/4) | ||
| Model | Shaft Output | Shell Output | ||||||||
| 150BX | eighty one.00 | 80.00 | 880.00 | 49.00 | 820.00 | one.00 | 1.00 | 6000 | six.07×10-6 | |
| 105.00 | one hundred forty.00 | 4.32×10-six | ||||||||
| 121.00 | 120.00 | three.56×10-6 | ||||||||
| 141.00 | one hundred forty.00 | 3.88×10-six | ||||||||
| 161.00 | a hundred and sixty.00 | two.39×10-6 | ||||||||
| Input Equipment Shaft Variety | Design No. | A | B | BB | C | D | d | dd | E | F | L |
| Standand A | 150BX-E | twenty five | forty six | / | 95 | 23.five | eleven or fourteen | five.5 | 21.5 | / | / |
| Standand B | 150BX-E | 25 | 50 | sixty six | a hundred | thirty | 19 | five.5 | 21.5 | 23.5 | / |
Comprehensive Photographs
RVE Series Construction
one. Needle Tooth Shell
2. Pin Gear
3. Principal CZPT
4. Output Flange
five. Supporting Flange
6. Input Shaft
seven. Crankshaft
eight. Planetary Gear
nine. CZPT Cycloidal Equipment
Major interior elements
Crankshaft
1. It is linked with the spur gears to kind the enter portion of the 2nd stage reduction of the reducer
two. The crankshaft does eccentric motion
3. CZPTed grinding wheel stick to-up precision grinding, imported measuring center detects the accuracy of elements
CZPT Cycloidal Gear
one.Grinding with imported precision gear grinding equipment
two. Connected to the eccentric part of the crankshaft
Needle Tooth Shell
1-time clamping to full good grinding
More information
A lot more products,you should simply click here…
Quality Handle
Firm Profile
Shipping
Our Companies
one.Upkeep time & Guarantee: 1 calendar year right after leaving manufacturing unit.
two.Other provider: Like modeling variety manual, set up guidebook, and problem shooting guide, etc.
FAQ
Q: What’re your main goods?
A: We currently create Brushed DC Motors, Brushed DC Equipment Motors, Planetary DC Gear Motors, Brushless DC Motors, AC Motors, Large CZPT Planetary CZPT and CZPT Cycloidal CZPT and so on.. You can examine the specifications for above motors on our website and you can electronic mail us to advocate necessary motors for each your specification also.
Q: How to select a appropriate motor or gearbox?
A:If you have motor photos or drawings to demonstrate us, or you have detailed requirements, such as, voltage, velocity, torque, motor size, functioning mode of the motor, essential life time and noise level and so forth, make sure you do not wait to let us know, then we can suggest suited motor per your request accordingly.
Q: Do you have a CZPT service for your common motors or gearboxes?
A: Of course, we can customize for every your ask for for the voltage, speed, torque and shaft dimension/condition. If you require additional wires/cables soldered on the terminal or require to add connectors, or capacitors or EMC we can make it way too.
Q: Do you have an specific design support for motors?
A: Indeed, we would like to design motors individually for our consumers, but some variety of molds are necessory to be developped which might need to have exact expense and design charging.
Q: What is actually your direct time?
A: CZPTly talking, our normal normal merchandise will want fifteen-30days, a little bit more time for CZPT products. But we are very adaptable on the direct time, it will depend on the certain orders.
