ZD Agricultural CZPT High CZPT 52mm ZDR Collection Planetary CZPT
Solution Description
ZDR collection planetary gearbox has adopted helical equipment design and style, so the meshing of gears can be smoother. This sequence has a double-supported and sealed structure, easier to put in for clients. It is extensively utilised in linear manipulators, packaging machinery, assembly lines and and so forth. The greatest backlash of the ZDR collection is much less than five arc.min and the reduction ratio covers three~81.
The Product Advantages of Planetary CZPT:
1.Flexible construction layout, in line with numerous doing work circumstances.
2.Ring gear processing technology: Making use of interior gear slotting device and hobbing device the precision of ring gear right after processing can achieve GB7.
3.Hardened equipment secondary scraping engineering: secondary high-speed dry chopping of gear eliminates gear deformation induced by warmth remedy. Gear accuracy can attain GB6.
four.CZPT backlash testing.
How to Read through:
52 ZDR 20 ( ) (S) – 750 T1 ( )
a b c d e f g h
a | Frame Dimensions | fifty two =52mm |
b | Series code:ZDR | Indirect tooth precision |
c | Reduction Ratio | Single Stage: three,4,five,6,seven,8,nine,ten Two Stages: 15,20,25,35,45,81. |
d | Backlash | Single Phase: 12arc.min Two Levels: 15arc.min |
e | Input shaft sort | S:Overall locking(Omission)(regardless regardless of whether the motor with keyway can use it. But D Reduce cannot use) S1:Locking with locking ring(irrespective whether or not the motor with keyway can use it. But D Cut cannot use) S2:Locking with keyway (enter shaft with crucial) K:With keyway A:0ther kind (you should get in touch with with us) |
f | Relevant servo motor electricity (W),Make sure you make contact with us for certain power | |
g | Remember to speak to us for the mouting kind of the flang | |
h | Remember to get in touch with us for the product of servo motor |
Spesifications & Information
When input velocity is 3000rpm
Product NO. | Reduction Ratio | Motor | Output Shaft Pace (rpm) | CZPT Output Torque (N.m) | Instantaneous max.Output Torque (N.m) | Permissible Radial Load (N) | Permissible Axial Load (N) | Interior Instant Ohnertia Of Enter Shaftconversion (x10-four kg.m2) | Perrmissible Output Torque (N.m) | Instantaneous Max. Permissible Output Torque (N.m) |
52ZDR | three | fifty | 1000 | .255 | .784 | 392 | 196 | .571 | 3.forty three | ten.three |
one hundred | .715 | 2.06 | .571 | |||||||
200 | 1.forty seven | four.fifty one | .135 | |||||||
four hundred | three.43 | 10.3 | .145 | |||||||
5 | fifty | 600 | .510 | one.forty seven | 490 | 245 | .04 | one.57 | four.70 | |
100 | one.eighteen | three.seventy two | .04 | one.57 | 4.70 | |||||
200 | two.sixty five | eight.04 | .118 | 2.eighty four | eight.fifty three | |||||
9 | fifty | 333 | .921 | two.74 | 588 | 294 | .035 | two.35 | 7.twenty five | |
a hundred | two.twenty five | six.86 |
Note1) The moment of enter shaft conversion is only gained from the reducer, so it does not consist of second of inertia of the motor.
Note2) The max. input pace is 5000rpm. Usually set to 3000rpm or significantly less.
Note3) The permissble radial load is indicated on the center of the output shaft.
Note4) All values are within the assortment corresponding to helical equipment.
When input pace is 3000rpm
Solution NO. | Reduction Ratio | Motor | Output Shaft Speed (rpm) | CZPT Output Torque (N.m) | Instantaneous max.Output Torque (N.m) | Permissible Radial Load (N) | Permissible Axial Load (N) | Internal Moment Ohnertia Of Enter Shaftconversion (x10-4 kg.m2) | Perrmissible Output Torque (N.m) | Instantaneous Max. Permissible Output Torque (N.m) |
52ZDR | fifteen | fifty | two hundred | one.67 | 5.00 | 784 | 392 | .035 | four.02 | twelve.2 |
a hundred | three.72 | 11.4 | ||||||||
twenty | 50 | 150 | 2.21 | 6.sixty three | 804 | 402 | .034 | 5.00 | fifteen. | |
one hundred | 5.00 | fifteen. | ||||||||
25 | 50 | a hundred and twenty | two.seventy four | 8.33 | 882 | 441 | .0325 | 4.02 | twelve.two | |
a hundred | six.27 | 19. | 6.27 | 19. | ||||||
35 | fifty | eighty five | three.eighty four | 11.5 | 882 | 441 | .030 | 3.eighty four | eleven.5 |
Note1) The second of enter shaft conversion is only acquired from the reducer, so it does not include moment of inertia of the motor.
Note2) The max, input pace is 5000rpm. Generally set to 3000rpm or less.
Note3) The permissble radial load is indicated on the middle of the output shaft.
Note4) All values are inside the variety corresponding to helical gear.
When enter pace is 2000rpm
Product NO. | Reduction Ratio | Motor | Output Shaft Pace (rpm) | CZPT Output Torque (N.m) | Instantaneous max.Output Torque (N.m) | Permissible Radial Load (N) | Permissible Axial Load (N) | Inside Minute Ohnertia Of Enter Shaftconversion (x10-four kg.m2) | Perrmissible Output Torque (N.m) | Instantaneous Max. Permissible Output Torque (N.m) |
52ZDR | 3 | 50 | 666 | .477 | 1.43 | 450 | 225 | .571 | 3.forty three | ten.3 |
a hundred | 1.05 | 3.fifteen | .one hundred thirty five | |||||||
200 | two.forty eight | 7.forty five | .a hundred forty five | |||||||
five | 50 | four hundred | .795 | two.39 | 560 | 280 | .040 | one.57 | 4.70 | |
one hundred | 1.57 | 4.70 | .118 | |||||||
nine | fifty | 222 | 1.57 | four.seventy two | 670 | 335 | .035 | 2.35 | seven.twenty five | |
15 | fifty | 133 | 2.sixty two | 7.87 | 882 | 441 | .035 | 4.02 | twelve.two | |
20 | 50 | 100 | 3.5 | 10.five | 910 | 455 | .034 | 5.00 | fifteen. | |
twenty five | fifty | 80 | four.37 | thirteen.1 | 882 | 441 | .0325 | six.27 | 19. |
Note1) The instant of enter shaft conversion is only acquired from the reducer, so it does not consist of instant of inertia of the motor.
Note2) The permissble radial load is indicated on the centre of the output shaft.
Note3) All values are in the range corresponding to helical equipment.
Dimensions (Unit: mm):
Solution NO. | Reduction Ratio | Motor | Total Length L | Output Shaft | Flange | |||||||||||||
CZPT- manufactured MSMA |
Yaskawa-created SGMASH SGMSH | Mitsubishi-manufactured HC-KFS HC-RFS |
LR | S | Q | QM | QM | W×U | T | D | LB | LE | LA | LZ | X | |||
52ZDR | three,five,nine | fifty | ninety nine.5 | 32 | twelve | twenty | 18 | M4(depth)12 | 4×13.five | four | fifty two | 50 | three | 60 | M5 | twelve | ||
15,20,25,35 | fifty | one hundred ten | ||||||||||||||||
3,five,nine | 100 | ninety nine.5 | ||||||||||||||||
fifteen,twenty,25 | 100 | a hundred and ten | ||||||||||||||||
three,five | two hundred | 104.five | ||||||||||||||||
3 | 400 | 104.5 |
Note1) Remember to inquire to us if motor design just isn’t regular (Matching motor checklist). (The flange dimension may possibly be different if motor assension is different.)
Note2) Rotation of the output shaft is in the identical path as that of motor enter.
Note3) All values are inside of the selection corresponding to helical gear.
System
CZPT help mechanism
1.The planetary gear is placed in the center of the output shaft.
2.The output shaft bearing is placed at both finishes of the planetary gear.
3.Individual solar equipment and coupling.
Compact output shaft system
It adopts the design and style of output shaft integrated program, compact construction, higher rigidity, and it can withstand huge impact. Location the input coupling and the sunlight gear at the centre of the output shaft to increase the concentricity of the components, thereby efficiently controlling the gear clearance and enhancing the backlash of the entire gearbox.
Construction
Complete needle construction
The inner bearing of the planetary gear adopts a complete-needle design and style, the interior gap is produced by a grinding process, the surface area hardness is HRC60, and the cylindricity is much less than .003mm.
Ring gear composition
The integral framework of the ring gear and the output flange enhances its rigidity and reduces misassembly.
Other Product Type of ZDR Collection
A lot more items,please click on below…
Business Profile
Shipping
Our Companies
1.Maintenance time & Guarantee: one calendar year right after leaving manufacturing unit.
two.Other provider: Such as modeling choice guidebook, set up manual, and dilemma shooting guide, etc.
FAQ
Q: What’re your major items?
A: We currently create Brushed DC Motors, Brushed DC Gear Motors, Planetary DC Gear Motors, Brushless DC Motors, AC Motors, Large CZPT Planetary CZPT and CZPT Cycloidal CZPT and so forth.. You can check the technical specs for earlier mentioned motors on our internet site and you can electronic mail us to advocate needed motors for each your specification also.
Q: How to select a ideal motor or gearbox?
A:If you have motor images or drawings to display us, or you have in depth requirements, such as, voltage, speed, torque, motor dimension, functioning method of the motor, necessary life time and noise level and so on, you should do not be reluctant to allow us know, then we can advocate ideal motor per your request accordingly.
Q: Do you have a CZPT service for your regular motors or gearboxes?
A: Of course, we can customise for each your request for the voltage, speed, torque and shaft size/condition. If you require further wires/cables soldered on the terminal or want to include connectors, or capacitors or EMC we can make it also.
Q: Do you have an person style service for motors?
A: Sure, we would like to style motors independently for our consumers, but some sort of molds are necessory to be developped which could need precise cost and style charging.
Q: What’s your guide time?
A: CZPTly talking, our standard normal solution will need to have fifteen-30days, a bit for a longer time for CZPT goods. But we are really flexible on the direct time, it will depend on the specific orders.