ZD Large CZPT 78mm Zdr Collection Planetary CZPT with CZPTx Equipment
Merchandise Description
ZDR sequence planetary gearbox has adopted helical equipment design, so the meshing of gears can be smoother. This collection has a double-supported and sealed construction, easier to set up for consumers. It is extensively utilised in linear manipulators, packaging machinery, assembly traces and etc. The highest backlash of the ZDR sequence is less than five arc.min and the reduction ratio covers 3~81.
The Product Advantages of Planetary CZPT:
one.Versatile structure design and style, in line with numerous functioning problems.
two.Ring equipment processing technology: Employing interior gear slotting equipment and hobbing device the precision of ring equipment after processing can achieve GB7.
three.Hardened gear secondary scraping technologies: secondary high-speed dry slicing of gear eradicates gear deformation induced by warmth remedy. Gear accuracy can reach GB6.
four.CZPT backlash testing.
How to Read:
78 ZDR 20 ( ) (S) – 750 T1 ( )
a b c d e f g h
a | Frame Dimensions | seventy eight =78mm |
b | Series code:ZDR | Indirect tooth precision |
c | Reduction Ratio | Single Stage: three,4,five,six,7,8,9,10 Two Levels: fifteen,20,twenty five,35,45,81. |
d | Backlash | One Phase: 8arc.min Two Levels: 12arc.min |
e | Input shaft kind | S:General locking(Omission)(no matter regardless of whether the motor with keyway can use it. But D Reduce are unable to use) S1:Locking with locking ring(no matter whether the motor with keyway can use it. But D Minimize can’t use) S2:Locking with keyway (enter shaft with key) K:With keyway A:0ther sort (remember to get in touch with with us) |
f | Applicable servo motor power (W),Remember to make contact with us for distinct electricity | |
g | Make sure you speak to us for the mouting variety of the flang | |
h | You should contact us for the design of servo motor |
Spesifications & Particulars
When enter pace is 3000rpm
Merchandise NO. | Reduction Ratio | Motor | Output Shaft Pace (rpm) | CZPT Output Torque (N.m) | Instantaneous max.Output Torque (N.m) | Permissible Radial Load (N) | Permissible Axial Load (N) | Internal Minute Ohnertia Of Enter Shaftconversion (x10-four kg.m2) | Perrmissible Output Torque (N.m) | Instantaneous Max. Permissible Output Torque (N.m) |
78ZDR | three | 750 | one thousand | 6.37 | 19.three | 784 | 392 | .913 | six.86 | twenty.six |
five | 400 | 600 | 5.39 | sixteen.two | 980 | 490 | .363 | 6.fifty seven | 19.7 | |
750 | ten.seven | 32.1 | .713 | eleven.five | 34.3 | |||||
9 | 200 | 333 | three.seventy two | eleven.3 | 1180 | 588 | .275 | 9.70 | 29.two | |
four hundred | nine.51 | 28.five |
Note1) The instant of enter shaft conversion is only obtained from the reducer, so it does not incorporate second of inertia of the motor.
Note2) The max. enter pace is 5000rpm. Generally set to 3000rpm or less.
Note3) The permissble radial load is indicated on the centre of the output shaft.
Note4) All values are inside the range corresponding to helical equipment.
When input pace is 3000rpm
Solution NO. | Reduction Ratio | Motor | Output Shaft Pace (rpm) | CZPT Output Torque (N.m) | Instantaneous max.Output Torque (N.m) | Permissible Radial Load (N) | Permissible Axial Load (N) | Interior Second Ohnertia Of Input Shaftconversion (x10-4 kg.m2) | Perrmissible Output Torque (N.m) | Instantaneous Max. Permissible Output Torque (N.m) |
78ZDR | 15 | two hundred | 200 | six.27 | 18.8 | 1470 | 735 | .three hundred | sixteen.two | forty eight.6 |
400 | 15.8 | forty seven.five | ||||||||
twenty | 200 | one hundred fifty | 8.69 | 26.1 | 1570 | 785 | .294 | 21.1 | sixty three.3 | |
four hundred | 21.one | 63.three | ||||||||
25 | two hundred | a hundred and twenty | 11.1 | 33.three | 1670 | 833 | .288 | 21.7 | sixty four.nine | |
four hundred | 26.4 | 79.2 | 26.4 | 79.two | ||||||
35 | 100 | 85 | seven.24 | 21.7 | 1670 | 833 | .065 | 13.9 | forty one.7 | |
200 | 15.five | 46.6 | .262 | fifteen.five | forty six.6 | |||||
forty five | 50 | sixty six | three.86 | eleven.six | 1670 | 833 | .5715 | nine.50 | 28.six | |
a hundred | nine.31 | 28. | ||||||||
81 | fifty | 37 | 7.02 | twenty.eight | 1670 | 833 | .571 | nine.70 | 29.2 |
Note1) The second of enter shaft conversion is only acquired from the reducer, so it does not include instant of inertia of the motor.
Note2) The max, input pace is 5000rpm. Usually established to 3000rpm or significantly less.
Note3) The permissble radial load is indicated on the heart of the output shaft.
Note4) All values are within the selection corresponding to helical gear.
When input pace is 2000rpm
Product NO. | Reduction Ratio | Motor | Output Shaft Pace (rpm) | CZPT Output Torque (N.m) | Instantaneous max.Output Torque (N.m) | Permissible Radial Load (N) | Permissible Axial Load (N) | Inside Moment Ohnertia Of Enter Shaftconversion (x10-4 kg.m2) | Perrmissible Output Torque (N.m) | Instantaneous Max. Permissible Output Torque (N.m) |
78ZDR | three | 400 | 666 | five.01 | 15. | 900 | 450 | .913 | six.86 | 20.six |
five | two hundred | four hundred | 3.82 | 11.5 | 1120 | 560 | .363 | six.fifty seven | 19.7 | |
four hundred | eight.35 | 25.one | .713 | 11.5 | 34.3 | |||||
nine | one hundred | 222 | two.35 | 7.04 | 1340 | 670 | .275 | 9.70 | 29.two | |
200 | 6.64 | 19.nine | ||||||||
15 | one hundred | 133 | three.91 | 11.seven | 1670 | 833 | .300 | sixteen.two | 48.six | |
two hundred | 11.1 | 33.two | ||||||||
twenty | a hundred | 100 | five.seventy three | seventeen.two | 1790 | 895 | .294 | 21.one | 63.3 | |
two hundred | fourteen.eight | forty four.four | ||||||||
twenty five | a hundred | eighty. | seven.sixteen | 21.five | 1670 | 833 | .288 | 21.7 | 64.nine | |
two hundred | eighteen.5 | fifty five.four | ||||||||
35 | fifty | fifty seven. | four.forty three | thirteen.three | 1900 | 950 | .262 | 15.five | forty six.6 | |
one hundred | twelve.7 | 38.1 | ||||||||
forty five | fifty | forty four.four | five.eighty | 17.4 | 1670 | 833 | .5715 | nine.50 | 28.six | |
81 | 50 | 24.six | 9.70 | 29.2 | 1670 | 833 | .5710 | 9.70 | 29.two |
Note1) The minute of enter shaft conversion is only acquired from the reducer, so it does not consist of instant of inertia of the motor.
Note2) The permissble radial load is indicated on the centre of the output shaft.
Note3) All values are inside the selection corresponding to helical equipment.
Dimensions (Device: mm):
Merchandise NO. | Reduction Ratio | Motor | Total Size L | Output Shaft | Flange | |||||||||||||
CZPT- created MSMA |
Yaskawa-produced SGMASH SGMSH | Mitsubishi-created HC-KFS HC-RFS |
LR | S | Q | QM | QM | W×U | T | D | LB | LE | LA | LZ | X | |||
78ZDR | 45,eighty one | fifty | 142 | 50 | 19 | 30 | 26 | M5(depth)20 | 6×21.5 | six | eighty | 70 | three | 90 | M6 | 20 | ||
35 | one hundred | a hundred and fifty | ||||||||||||||||
forty five | a hundred | 142 | ||||||||||||||||
9 | two hundred | 139.five | ||||||||||||||||
15,20,twenty five,35 | 200 | a hundred and fifty | ||||||||||||||||
5,nine | four hundred | 139.5 | ||||||||||||||||
15,twenty,twenty five | 400 | 150 | ||||||||||||||||
3,five | 750 | 143.5 |
Note1) You should inquire to us if motor model isn’t normal (Matching motor checklist). (The flange dimension may be distinct if motor assension is diverse.)
Note2) Rotation of the output shaft is in the very same path as that of motor enter.
Note3) All values are in the selection corresponding to helical gear.
Mechanism
CZPT assistance system
one.The planetary gear is placed in the middle of the output shaft.
2.The output shaft bearing is put at each finishes of the planetary gear.
3.Different sunlight gear and coupling.
Compact output shaft system
It adopts the style of output shaft built-in system, compact composition, higher rigidity, and it can face up to large impact. Spot the enter coupling and the sunshine gear at the center of the output shaft to boost the concentricity of the factors, therefore successfully controlling the gear clearance and enhancing the backlash of the whole gearbox.
Composition
Entire needle framework
The inner bearing of the planetary gear adopts a complete-needle layout, the internal gap is manufactured by a grinding method, the area hardness is HRC60, and the cylindricity is significantly less than .003mm.
Ring equipment structure
The integral construction of the ring equipment and the output flange improves its rigidity and minimizes misassembly.
Other Product Type of ZDR Series
Far more items,you should click right here…
Company Profile
Delivery
Our Providers
one.Routine maintenance time & Guarantee: 1 12 months following leaving manufacturing unit.
two.Other service: Like modeling variety guide, installation guide, and difficulty capturing guide, etc.
FAQ
Q: What’re your main items?
A: We at the moment produce Brushed DC Motors, Brushed DC Gear Motors, Planetary DC Equipment Motors, Brushless DC Motors, AC Motors, Substantial CZPT Planetary CZPT and CZPT Cycloidal CZPT and so on.. You can check out the specifications for above motors on our internet site and you can email us to advise essential motors per your specification also.
Q: How to pick a ideal motor or gearbox?
A:If you have motor photographs or drawings to show us, or you have comprehensive requirements, these kinds of as, voltage, pace, torque, motor measurement, working manner of the motor, necessary life span and sounds level and so on, remember to do not be reluctant to enable us know, then we can suggest ideal motor per your request accordingly.
Q: Do you have a CZPT support for your normal motors or gearboxes?
A: Of course, we can customise for each your request for the voltage, pace, torque and shaft dimensions/shape. If you want additional wires/cables soldered on the terminal or need to have to incorporate connectors, or capacitors or EMC we can make it also.
Q: Do you have an individual design service for motors?
A: Sure, we would like to layout motors independently for our consumers, but some variety of molds are necessory to be developped which could need to have precise cost and style charging.
Q: What is your direct time?
A: CZPTly speaking, our normal normal item will need 15-30days, a little bit longer for CZPT items. But we are extremely versatile on the guide time, it will depend on the particular orders.