Zd High Precision and Helix Gear Round 90mm Ae Series Planetary Gearbox

Zd High CZPT and Helix Gear Round 90mm Ae Series Planetary CZPT

ZD Substantial CZPT and CZPTx Equipment Round 90mm AE Collection Planetary CZPT

Solution Description

AE Collection Planetary CZPT moreover provides front and rear oil seals, employs the output shaft double assist composition and design and style of helix gear, which tends to make the equipment meshing  smoother and steady, the AE Collection can be used in different manage transmission fields with servo motors. The backlash of the AE sequence is much less than 5 arc.min and the reduction ratio covers 3~100.

The Product Advantages of Planetary CZPT:

one.Versatile composition design and style, in line with different working circumstances.
two.Ring equipment processing technologies: Using interior gear slotting device and hobbling device the precision of ring gear right after processing can achieve GB7.
three.Hardened gear secondary scraping technological innovation: secondary higher-speed dry reducing of gear removes gear deformation caused by warmth remedy. Equipment precision can attain GB6.
4.CZPT backlash screening.

How To Study
90    AE    10    (  )     (S) – 40   T1
 a       b      c      d        e       f       g

a    Frame Dimension     90=90mm
b    Series code: AE     Spherical mounting flange series
c    Reduction Ratio     Single Stage: 3,4,5,six,seven,8,nine,ten
    Two Levels: fifteen,twenty,25,30,35,40,forty five,50,60,70,80,90,a hundred
d    Backlash     Solitary Stage: ≤5arc.min  
    Two Phases: ≤8arc.min 
e    Input shaft kind     S: Overall locking (Omitted) (Regardless of regardless of whether the motor has a keyway)
    S1: Locking with locking ring (Regardless regardless of whether the motor has a  keyway )
    S2: Locking with keyway (Input shaft with key)
    K: With keyway
    A: Other varieties (Please get in touch with with us)
f Relevant servo motor electricity (W),Please make contact with us for particular energy
g Please get in touch with us for the mounting sort of the flange


Spesifications & Particulars


Solution Variety Unit Number Of Phase Reduction Ratio 90AE
Rated Output Torque N.M 1 three eighty five
4 ninety five
five one zero five
seven ninety three
eight eighty three
ten 70
two 12 one hundred fifteen
fifteen one hundred fifteen
16 a hundred thirty
twenty 130
twenty five one hundred thirty five
32 120
35 125
forty 115
50 135
sixty four 83
eighty 83
a hundred 73
Max. radial force* N 1,two three~one hundred 2100
Max. axial drive* one,2 3~a hundred 1050
Entire Load Performance % 1 3~10 ≥97%
2 fifteen~a hundred ≥94%
Backlash arc.min one 3~ten ≤5
2 15~100 ≤8

*Greatest radial force and greatest axial force, when the output is 100rpm, it functions on the heart placement (L/two) of the output shaft.

Dimensions (mm):

Solution type No. of phase L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 D1 D2
90AE one 151 33.seven seventy seven.3 forty 36 28 four 3 40 ten Φ90 Φ70G7
2 165.5 ninety one.eight
No. of phase D3 D4 D5 D6 D7 D8 B1 H1 G1 G2 G3 Q3
1,two ≤19G7 Φ20h7 Φ30 Φ60h7 Φ90 Φ70 six 22.five M5×12 M6×12 M6×18 80

Particulars of AE series Planetary CZPT


Compact output shaft system

It adopts the design of output shaft built-in technique, compact construction, large rigidity, and it can stand up to large impact. Place the input coupling and the sun equipment at the heart of the output shaft to increase the concentricity of the elements, thereby successfully managing the equipment clearance and bettering the backlash of the whole gearbox.


Total needle framework

The inner bearing of the planetary gear adopts a complete-needle design and style, the inner hole is made by a grinding method, the surface hardness is HRC60, and the cylindricity is significantly less than .003mm.

In contrast with AF Sequence
AF collection planetary gearbox makes use of sq. through hole flange, but AE series utilizes round threaded flange.
For other technical specs, AE series planetary gearbox is equivalent with AF collection.

Other Product Types of AE sequence Planetary CZPT

Much more goods,remember to simply click listed here…

Assembly Treatment

Make sure you adhere to the tips bellow to assemble the servo motor and reducer. Other than for specified goods, there are a variety of proportions of servo motors, some motors may not be able to hook up with flanges.Therefore, be sure to use the appropriate motor which is specified when place your get.


In Scenario Of Assembling A Motor With no Crucial

1.Get off the rubber cap, switch the input shaft, and match the head of the bolt to the hole of the rubber cap. Make sure that the repairing bolt is loosened.

two.Progressively place the motor shaft into the enter shaft (Make certain that it is easily set in CZPT jam.). Be careful not to be inserted with the motor tilted.

three.Attach the motor to the reducer and fasten the bolt with selected fastening torque. See Table one.

4.CZPTen the repairing bolt of the input shaft with selected fastening torque wrench, and so on. See Desk 2.

five.Set on the rubber cap.


Desk one

Motor Mixture Bolt CZPTening Torque
(N·m) (kgf·cm)
M3 1. ten
M4 three. 30
M5 5.eight 60
M6 9.8 a hundred
M8 19.6 200
M10 39.two 400
M12 68.six seven hundred
M16 168 1650

Desk two

Mixture Bolt CZPTening Torque
(N·m) (kgf·cm)
M3 1.5 fifteen
M4 three.five 35
M5 seven.1 seventy one
M6 twelve one hundred twenty
M8 30 300
M10 sixty 612


Organization Profile

Shipping and delivery

Our Services

1.Servicing time & Guarantee: 1 yr soon after leaving manufacturing unit 
2.Other service: Like modeling choice guide, set up guidebook, and problem capturing guidebook, etc.


Q: What’re your primary merchandise?
A: We currently make Brushed DC Motors, Brushed DC Equipment Motors, Planetary DC Gear Motors, Brushless DC Motors, AC Motors, Substantial CZPT Planetary CZPT and CZPT Cycloidal CZPT and so on.. You can verify the specifications for earlier mentioned motors on our site and you can email us to recommend required motors per your specification way too.

Q: How to choose a suitable motor or gearbox?
A:If you have motor pictures or drawings to show us, or you have thorough specifications, this kind of as, voltage, speed, torque, motor dimensions, working manner of the motor, needed life span and sounds stage and so on, make sure you do not be reluctant to permit us know, then we can recommend suitable motor for every your request accordingly.

Q: Do you have a CZPT services for your standard motors or gearboxes?
A: Of course, we can personalize for every your request for the voltage, speed, torque and shaft dimension/condition. If you want further wires/cables soldered on the terminal or require to add connectors, or capacitors or EMC we can make it way too.

Q: Do you have an specific style provider for motors?
A: Of course, we would like to style motors separately for our clients, but some sort of  molds are necessory to be developped which may possibly need precise expense and layout charging. 

Q: What’s your guide time?
A: CZPTly talking, our standard regular solution will want fifteen-30days, a bit for a longer time for CZPT goods. But we are very flexible on the lead time, it will rely on the certain orders.


Zd High CZPT and Helix Gear Round 90mm Ae Series Planetary CZPT