Zd Horizontal Type High Precision and Helix Gear Round 90mm Ae Series Planetary Gearbox

Zd Horizontal Type High CZPT and Helix Gear Round 90mm Ae Series Planetary CZPT

ZD Horizontal Type Substantial CZPT and CZPTx Gear Spherical 90mm AE Sequence Planetary CZPT

Product Description

AE Sequence Planetary CZPT additionally adds entrance and rear oil seals, employs the output shaft double support composition and design of helix gear, which helps make the gear meshing  smoother and steady, the AE Series can be used in different management transmission fields with servo motors. The backlash of the AE collection is considerably less than 5 arc.min and the reduction ratio addresses three~100.

The Product Advantages of Planetary CZPT:

one.Versatile construction style, in line with a variety of doing work situations.
two.Ring equipment processing engineering: Utilizing inner gear slotting equipment and hobbling device the precision of ring equipment after processing can get to GB7.
3.Hardened equipment secondary scraping technological innovation: secondary large-velocity dry cutting of gear removes gear deformation caused by warmth remedy. Equipment precision can achieve GB6.
four.CZPT backlash screening.

How To Read
90    AE    10    (  )     (S) – 40   T1
 a       b      c      d        e       f       g

a    Frame Dimensions     ninety=90mm
b    Series code: AE     Spherical mounting flange collection
c    Reduction Ratio     Solitary Phase: 3,four,5,six,seven,8,nine,ten
    Two Phases: 15,20,twenty five,thirty,35,forty,forty five,50,sixty,70,80,ninety,one hundred
d    Backlash     Solitary Stage: ≤5arc.min  
    Two Stages: ≤8arc.min 
e    Input shaft variety     S: Total locking (Omitted) (Irrespective of no matter whether the motor has a keyway)
    S1: Locking with locking ring (Irrespective whether the motor has a  keyway )
    S2: Locking with keyway (Enter shaft with essential)
    K: With keyway
    A: Other varieties (You should speak to with us)
f Applicable servo motor electrical power (W),Make sure you speak to us for distinct electricity
g Remember to speak to us for the mounting variety of the flange

 

Spesifications & Particulars

 

Product Type Unit Number Of Stage Reduction Ratio 90AE
Rated Output Torque N.M 1 three 85
four ninety five
five a hundred and five
7 ninety three
8 eighty three
10 70
2 12 115
15 a hundred and fifteen
16 one hundred thirty
twenty 130
25 a hundred thirty five
32 one hundred twenty
35 a hundred twenty five
forty 115
fifty a hundred thirty five
sixty four eighty three
80 83
100 seventy three
Max. radial pressure* N 1,two 3~100 2100
Max. axial pressure* one,2 three~100 1050
Full Load Effectiveness % 1 3~10 ≥97%
2 fifteen~one hundred ≥94%
Backlash arc.min one three~ten ≤5
two 15~a hundred ≤8

*Highest radial force and greatest axial power, when the output is 100rpm, it functions on the heart place (L/two) of the output shaft.

Dimensions (mm):

Product variety No. of stage L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 D1 D2
90AE one 151 33.seven 77.3 forty 36 28 4 three 40 ten Φ90 Φ70G7
two one hundred sixty five.five 91.eight
No. of stage D3 D4 D5 D6 D7 D8 B1 H1 G1 G2 G3 Q3
1,two ≤19G7 Φ20h7 Φ30 Φ60h7 Φ90 Φ70 six 22.five M5×12 M6×12 M6×18 80

Specifics of AE collection Planetary CZPT

System

Compact output shaft system

It adopts the design of output shaft built-in method, compact structure, higher rigidity, and it can stand up to massive influence. Location the input coupling and the sun gear at the center of the output shaft to boost the concentricity of the factors, therefore efficiently managing the gear clearance and enhancing the backlash of the entire gearbox.
 

Composition

Total needle structure

The internal bearing of the planetary gear adopts a total-needle layout, the internal gap is created by a grinding procedure, the surface hardness is HRC60, and the cylindricity is less than .003mm.
 

In comparison with AF Sequence
AF collection planetary gearbox makes use of sq. by means of gap flange, but AE collection employs round threaded flange.
For other specifications, AE collection planetary gearbox is comparable with AF sequence.

Other Product Sorts of AE sequence Planetary CZPT
 

Much more items,you should click below…
 

Assembly Treatment

Make sure you stick to the tips bellow to assemble the servo motor and reducer. Other than for specified merchandise, there are numerous dimensions of servo motors, some motors may not be in a position to join with flanges.For that reason, be certain to use the suitable motor which is specified when place your order.

 

In Situation Of Assembling A Motor Without having Essential

one.Get off the rubber cap, switch the input shaft, and match the head of the bolt to the gap of the rubber cap. Make confident that the repairing bolt is loosened.

two.Progressively set the motor shaft into the input shaft (Guarantee that it is effortlessly place in CZPT jam.). Be cautious not to be inserted with the motor tilted.

three.Connect the motor to the reducer and fasten the bolt with specified fastening torque. See Desk one.

four.CZPTen the repairing bolt of the enter shaft with designated fastening torque wrench, etc. See Table 2.

five.Put on the rubber cap.
 

 

Desk 1

Motor Mixture Bolt CZPTening Torque
(N·m) (kgf·cm)
M3 one. ten
M4 3. thirty
M5 five.eight sixty
M6 nine.eight 100
M8 19.six two hundred
M10 39.2 four hundred
M12 sixty eight.six 700
M16 168 1650

Table two

Mix Bolt CZPTening Torque
(N·m) (kgf·cm)
M3 1.five fifteen
M4 three.five 35
M5 seven.1 71
M6 12 120
M8 30 three hundred
M10 60 612

 

Firm Profile

Shipping

Our Solutions

1.Servicing time & Guarantee: 1 yr right after leaving manufacturing facility 
2.Other support: Like modeling selection information, set up guidebook, and issue taking pictures information, etc.

FAQ

Q: What’re your principal items?
A: We at the moment create Brushed DC Motors, Brushed DC Equipment Motors, Planetary DC Equipment Motors, Brushless DC Motors, AC Motors, Substantial CZPT Planetary CZPT and CZPT Cycloidal CZPT etc.. You can check out the requirements for previously mentioned motors on our internet site and you can electronic mail us to suggest needed motors for every your specification as well.

Q: How to decide on a ideal motor or gearbox?
A:If you have motor photographs or drawings to demonstrate us, or you have comprehensive technical specs, these kinds of as, voltage, pace, torque, motor dimension, operating mode of the motor, necessary lifetime and noise degree etc, remember to do not hesitate to permit us know, then we can recommend suitable motor for every your ask for appropriately.

Q: Do you have a CZPT provider for your normal motors or gearboxes?
A: Sure, we can customize for every your request for the voltage, speed, torque and shaft dimensions/shape. If you require additional wires/cables soldered on the terminal or require to incorporate connectors, or capacitors or EMC we can make it way too.

Q: Do you have an person design and style services for motors?
A: Yes, we would like to layout motors separately for our clients, but some variety of  molds are necessory to be developped which might require precise value and style charging. 

Q: What is your guide time?
A: CZPTly speaking, our typical normal item will need fifteen-30days, a bit lengthier for CZPT goods. But we are really versatile on the guide time, it will rely on the specific orders.
 

 

Zd Horizontal Type High CZPT and Helix Gear Round 90mm Ae Series Planetary CZPT