Zd One – Two Stages High Precision 125mm Zdr Series Planetary Gearbox

Zd One - Two Stages High CZPT 125mm Zdr Series Planetary CZPT

ZD A single – Two Stages Higher CZPT 125mm ZDR Series Planetary CZPT 

Product Description

ZDR collection planetary gearbox has adopted helical equipment design, so the meshing of gears can be smoother. This collection has a double-supported and sealed construction, less complicated to install for clients. It is widely used in linear manipulators, packaging machinery, assembly traces and etc. The highest backlash of the ZDR sequence is considerably less than 5 arc.min and the reduction ratio addresses three~81.

The Product Advantages of Planetary CZPT:

1.Flexible structure design, in line with different operating problems.
2.Ring equipment processing technological innovation: Utilizing inner equipment slotting device and hobbing machine the precision of ring gear following processing can achieve GB7.
three.Hardened gear secondary scraping technological innovation: secondary higher-pace dry slicing of equipment removes gear deformation caused by warmth treatment method. Gear precision can attain GB6.
four.CZPT backlash screening.

How to Go through:
a hundred twenty five ZDR  20   ( )     (S) –   750  T1   ( )
   a     b      c     d       e        f       g     h
 

a    Frame Size     125 =125mm
b    Series code:ZDR     Indirect tooth precision
c    Reduction Ratio     Single Stage: 3,4,five,six,seven,8,9,10
    Two Phases: fifteen,20,25,35,forty five,81.
d    Backlash     Solitary Stage: 8arc.min
    Two Stages: 12arc.min
e    Input shaft variety     S:General locking(Omission)(no matter regardless of whether the motor with keyway can use it. But D Minimize can’t use)
    S1:Locking with locking ring(irrespective no matter whether the motor with keyway can use it. But D Minimize can’t use)
    S2:Locking with keyway (input shaft with crucial)
    K:With keyway
    A:0ther type (please contact with us)
f Applicable servo motor electrical power (W),You should make contact with us for particular energy
g You should get in touch with us for the mouting kind of the flang
h You should contact us for the product of servo motor

 

Spesifications & Information

When enter velocity is 3000rpm

Product NO. Reduction Ratio Motor Output Shaft Pace (rpm) CZPT Output Torque (N.m) Instantaneous max.Output Torque (N.m) Permissible Radial Load (N) Permissible Axial Load (N) Internal Moment Ohnertia Of Input Shaftconversion (x10-four kg.m2) Perrmissible Output Torque (N.m) Instantaneous Max. Permissible Output Torque (N.m)
125ZDR 3 2500 one thousand 19. fifty seven.2 1370 686 5.55 44.1 132
3000 23.7 71.two five.fifty
3500 28.three 85.two five.50
4000 33.1 ninety nine. five.78
4500 37.seven 113 5.seventy eight
5000 42.nine 128 five.78
five 2000 600 23.eight 71.5 1670 833 3.fifty fifty six.eight 171
2500 31.eight ninety five.5 three.fifty
3000 39.6 119 3.48
3500 47.2 141 three.forty eight
4000 fifty five.3 166 three.seventy five
9 a thousand 333 twenty. 60.one 1960 980 2.81 73.5 221
1500 34.3 103
2000 forty eight.six 146
2500 60.eight 182
3000 seventy three. 219 2.seventy seven

Note1) The minute of enter shaft conversion is only obtained from the reducer, so it does not include minute of inertia of the motor.
Note2) The max. input velocity is 5000rpm. Generally established to 3000rpm or significantly less.
Note3) The permissble radial load is indicated on the heart of the output shaft.
Note4) All values are inside of the variety corresponding to helical equipment.

When input pace is 3000rpm

Solution NO. Reduction Ratio Motor Output Shaft Velocity (rpm) CZPT Output Torque (N.m) Instantaneous max.Output Torque (N.m) Permissible Radial Load (N) Permissible Axial Load (N) Internal Second Ohnertia Of Input Shaftconversion (x10-4 kg.m2) Perrmissible Output Torque (N.m) Instantaneous Max. Permissible Output Torque (N.m)
125ZDR 15 1000 two hundred 33.3 a hundred 2350 1180 one.ninety five 91.four 274
1500 fifty seven.2 172 two.80
2000 eighty one. 243 two.eighty
twenty five 1000 a hundred and twenty 55.7 167 2650 1320 one.880 65.four 196
35 750 eighty five seventy one. 213 3430 1715 .473 seventy one. 213
45 four hundred sixty six 47.five 142.five 3520 1760 .245 fifty seven. 171
750 ninety one.three 274 one.770 91.3 274
eighty one 200 37 36.1 108.3 3530 1765 .240 43.3 129.nine

Note1) The moment of enter shaft conversion is only gained from the reducer, so it does not consist of second of inertia of the motor.
Note2) The max, enter pace is 5000rpm. Generally set to 3000rpm or considerably less.
Note3) The permissble radial load is indicated on the center of the output shaft.
Note4) All values are inside of the selection corresponding to helical gear.

When enter pace is 2000rpm
 

Merchandise NO. Reduction Ratio Motor Output Shaft Velocity (rpm) CZPT Output Torque (N.m) Instantaneous max.Output Torque (N.m) Permissible Radial Load (N) Permissible Axial Load (N) Inside Minute Ohnertia Of Input Shaftconversion (x10-four kg.m2) Perrmissible Output Torque (N.m) Instantaneous Max. Permissible Output Torque (N.m)
125ZDR three 2000 666 23.7 seventy one.two 1570 785 5.50 44.1 132
2500 thirty.eight ninety two.5 five.fifty
3000 37.7 113 5.fifty
3500 44.one 132 5.seventy eight
five 1500 400 27.eight 83.five 1900 950 3.50 fifty six.8 171
2000 39.6 119 3.forty eight
2500 fifty one.four 154 3.seventy five
9 750 222 23.6 70.9 2240 1120 two.81 seventy three.5 221
1000 34.3 103
1500 53.7 161
2000 seventy three. 219 2.77
fifteen 750 133 39.four 118 2650 1320 two.eighty 91.four 274
a thousand fifty seven.2 172
1500 ninety one.3 274
25 750 80 sixty five.4 196 2650 1320 1.88 65.four 196

Note1) The instant of enter shaft conversion is only gained from the reducer, so it does not consist of minute of inertia of the motor.
Note2) The permissble radial load is indicated on the centre of the output shaft.
Note3) All values are in the variety corresponding to helical equipment.

Dimensions (Device: mm):

 

Merchandise NO. Reduction Ratio Motor Overall Length L Output Shaft Flange
CZPT- manufactured
MSMA
Yaskawa-made SGMASH SGMSH Mitsubishi-produced HC-KFS
HC-RFS
LR S Q QM QM W×U T D LB LE LA LZ X
125ZDR eighty one two hundred 210 seventy five 32 fifty five 52 M10(depth)twenty 10×35 eight a hundred twenty five one hundred ten five one hundred thirty five M10 20
forty five 400
35 750
45 750 235
nine a thousand 215
fifteen,twenty five a thousand 235
nine 1500 215
fifteen 1500 235
5,nine 2000 215
fifteen 2000 235
3,five,9 2500 215 / /
3,5,nine 3000 215 225 /
3,five 3500 215 / 225
three,5 4000 225 225 /
3 4500 225 / /
3 5000 225

Note1) Make sure you inquire to us if motor product isn’t standard (Matching motor record). (The flange dimension might be diverse if motor assension is different.)
Note2) Rotation of the output shaft is in the identical path as that of motor input.
Note3) All values are inside of the assortment corresponding to helical equipment.
 

Mechanism

CZPT support mechanism

1.The planetary gear is placed in the middle of the output shaft.
two.The output shaft bearing is placed at the two finishes of the planetary gear.
three.Separate sun equipment and coupling.

Compact output shaft mechanism

It adopts the style of output shaft integrated technique, compact framework, substantial rigidity, and it can endure big impact. Place the input coupling and the sunshine gear at the center of the output shaft to enhance the concentricity of the components, therefore efficiently controlling the gear clearance and enhancing the backlash of the entire gearbox.

 

Construction

Full needle composition

The inner bearing of the planetary gear adopts a complete-needle layout, the interior gap is made by a grinding approach, the surface area hardness is HRC60, and the cylindricity is considerably less than .003mm.

Ring gear composition

The integral composition of the ring equipment and the output flange increases its rigidity and decreases misassembly.

 

Other Design Variety of ZDR Sequence

Much more merchandise,remember to click on below…

Firm Profile

 

Delivery

Our Providers

one.Servicing time & Guarantee: 1 calendar year soon after leaving manufacturing unit.

2.Other support: Which includes modeling variety manual, installation guidebook, and problem shooting guidebook, etc.

FAQ

Q: What’re your principal merchandise?
A: We presently make Brushed DC Motors, Brushed DC Equipment Motors, Planetary DC Gear Motors, Brushless DC Motors, AC Motors, Higher CZPT Planetary CZPT and CZPT Cycloidal CZPT and so on.. You can check the specifications for previously mentioned motors on our web site and you can electronic mail us to advocate required motors for each your specification way too.

Q: How to select a ideal motor or gearbox?
A:If you have motor photographs or drawings to present us, or you have thorough technical specs, this sort of as, voltage, pace, torque, motor dimension, doing work method of the motor, needed lifetime and sounds stage and so forth, please do not hesitate to allow us know, then we can advocate suitable motor for every your ask for appropriately.

Q: Do you have a CZPT support for your regular motors or gearboxes?
A: Sure, we can customize for every your request for the voltage, speed, torque and shaft size/condition. If you require extra wires/cables soldered on the terminal or need to have to include connectors, or capacitors or EMC we can make it as well.

Q: Do you have an specific style provider for motors?
A: Of course, we would like to layout motors separately for our customers, but some sort of  molds are necessory to be developped which may possibly need specific cost and style charging. 

Q: What is your direct time?
A: CZPTly speaking, our normal normal item will need to have 15-30days, a little bit more time for CZPT goods. But we are very versatile on the direct time, it will rely on the specific orders.

Zd One - Two Stages High CZPT 125mm Zdr Series Planetary CZPT