ZD 1 – Two Levels Higher CZPT 98mm ZDR Series Planetary CZPT
Merchandise Description
ZDR sequence planetary gearbox has adopted helical equipment style, so the meshing of gears can be smoother. This collection has a double-supported and sealed construction, less complicated to set up for buyers. It is broadly used in linear manipulators, packaging machinery, assembly traces and and many others. The greatest backlash of the ZDR sequence is significantly less than five arc.min and the reduction ratio handles 3~81.
The Product Advantages of Planetary CZPT:
1.Flexible construction style, in line with a variety of functioning conditions.
2.Ring equipment processing engineering: Employing interior gear slotting device and hobbing machine the precision of ring equipment soon after processing can reach GB7.
three.Hardened gear secondary scraping technology: secondary substantial-pace dry cutting of equipment removes equipment deformation induced by warmth treatment. Gear accuracy can get to GB6.
4.CZPT backlash testing.
How to Read through:
98 ZDR 20 ( ) (S) – 750 T1 ( )
a b c d e f g h
| a | Frame Size | ninety eight =98mm |
| b | Series code:ZDR | Oblique tooth precision |
| c | Reduction Ratio | Single Stage: 3,4,five,6,seven,8,9,ten Two Levels: 15,20,25,35,forty five,81. |
| d | Backlash | One Phase: 8arc.min Two Phases: 12arc.min |
| e | Input shaft kind | S:General locking(Omission)(no matter whether or not the motor with keyway can use it. But D Lower can’t use) S1:Locking with locking ring(irrespective whether the motor with keyway can use it. But D Minimize can’t use) S2:Locking with keyway (input shaft with crucial) K:With keyway A:0ther kind (remember to speak to with us) |
| f | Applicable servo motor electricity (W),Please contact us for distinct electrical power | |
| g | You should get in touch with us for the mouting kind of the flang | |
| h | Remember to get in touch with us for the model of servo motor | |
Spesifications & Specifics
When enter velocity is 3000rpm
| Product NO. | Reduction Ratio | Motor | Output Shaft Pace (rpm) | CZPT Output Torque (N.m) | Instantaneous max.Output Torque (N.m) | Permissible Radial Load (N) | Permissible Axial Load (N) | Internal Instant Ohnertia Of Enter Shaftconversion (x10-4 kg.m2) | Perrmissible Output Torque (N.m) | Instantaneous Max. Permissible Output Torque (N.m) |
| 98ZDR | three | 1000 | a thousand | seven.fifty five | 22.8 | 882 | 441 | 2.forty three | 18.3 | fifty four.9 |
| 1500 | 12.3 | 37.one | ||||||||
| 2000 | 17.2 | 51.five | ||||||||
| 5 | one thousand | 600 | 13.four | 40.5 | 1080 | 539 | 1.eighty five | 23.5 | 70.six | |
| 1500 | 21.5 | sixty four.four | ||||||||
| nine | 750 | 333 | 18.two | 54.seven | 1470 | 735 | .650 | eighteen.2 | fifty four.7 |
Note1) The instant of input shaft conversion is only obtained from the reducer, so it does not consist of second of inertia of the motor.
Note2) The max. enter velocity is 5000rpm. Normally set to 3000rpm or less.
Note3) The permissble radial load is indicated on the centre of the output shaft.
Note4) All values are inside the selection corresponding to helical equipment.
When enter speed is 3000rpm
| Merchandise NO. | Reduction Ratio | Motor | Output Shaft Pace (rpm) | CZPT Output Torque (N.m) | Instantaneous max.Output Torque (N.m) | Permissible Radial Load (N) | Permissible Axial Load (N) | Internal Instant Ohnertia Of Enter Shaftconversion (x10-4 kg.m2) | Perrmissible Output Torque (N.m) | Instantaneous Max. Permissible Output Torque (N.m) |
| 98ZDR | 15 | 750 | two hundred | 30.4 | 91.2 | 1760 | 882 | .700 | thirty.4 | ninety one.two |
| twenty | 750 | 150 | forty.6 | 122 | 1910 | 955 | .690 | 40.six | 122 | |
| twenty five | 750 | a hundred and twenty | 50.seven | 152 | 2060 | 1030 | .680 | fifty.7 | 152 | |
| 35 | four hundred | eighty five | 37. | 111 | 2060 | 1030 | .269 | 37. | 111 | |
| forty five | 200 | sixty six | 21.one | sixty three.5 | 2060 | 1030 | .5716 | 28.3 | eighty five.2 | |
| 81 | a hundred | 37 | fourteen. | forty two. | 2060 | 1030 | .030 | seventeen.eight | fifty three.five |
Note1) The minute of input shaft conversion is only acquired from the reducer, so it does not consist of moment of inertia of the motor.
Note2) The max, input velocity is 5000rpm. Usually set to 3000rpm or less.
Note3) The permissble radial load is indicated on the middle of the output shaft.
Note4) All values are inside the variety corresponding to helical gear.
When input velocity is 2000rpm
| Solution NO. | Reduction Ratio | Motor | Output Shaft Speed (rpm) | CZPT Output Torque (N.m) | Instantaneous max.Output Torque (N.m) | Permissible Radial Load (N) | Permissible Axial Load (N) | Internal Minute Ohnertia Of Enter Shaftconversion (x10-four kg.m2) | Perrmissible Output Torque (N.m) | Instantaneous Max. Permissible Output Torque (N.m) |
| 98ZDR | three | 750 | 666 | eight.73 | 26.two | 1571 | 505 | two.43 | 18.3 | 54.9 |
| a thousand | twelve.three | 37.1 | ||||||||
| 1500 | eighteen.3 | 54.nine | ||||||||
| five | 750 | four hundred | 15.5 | forty six.five | 1230 | 615 | 1.eighty five | 23.5 | 70.six | |
| a thousand | 21.five | 64.4 | ||||||||
| 9 | four hundred | 222 | fourteen. | forty one.nine | 1680 | 840 | .650 | 18.two | fifty four.7 | |
| fifteen | four hundred | 133 | 23.3 | 69.8 | 2571 | 1571 | .seven hundred | 30.4 | ninety one.two | |
| twenty | four hundred | 100 | 31. | 93.1 | 2180 | 1090 | .294 | forty.6 | 122 | |
| 25 | 400 | 80. | 38.eight | 116 | 2060 | 1030 | .680 | fifty.seven | 152 | |
| 35 | 200 | 57. | 22. | sixty six. | 2340 | 1170 | .269 | 37. | 111 | |
| forty five | one hundred | forty four.four | 14. | forty two.1 | 2060 | 1030 | .5715 | 28.3 | eighty five.2 | |
| 200 | 28.3 | 85.2 | ||||||||
| eighty one | one hundred | 24.6 | 17.eight | 53.five | 2060 | 1030 | .0300 | seventeen.eight | fifty three.5 |
Note1) The moment of enter shaft conversion is only obtained from the reducer, so it does not include moment of inertia of the motor.
Note2) The permissble radial load is indicated on the middle of the output shaft.
Note3) All values are inside of the range corresponding to helical gear.
Dimensions (Unit: mm):
| Item NO. | Reduction Ratio | Motor | Overall Size L | Output Shaft | Flange | |||||||||||||
| CZPT- manufactured MSMA |
Yaskawa-made SGMASH SGMSH | Mitsubishi-produced HC-KFS HC-RFS |
LR | S | Q | QM | QM | W×U | T | D | LB | LE | LA | LZ | X | |||
| 98ZDR | eighty one | one hundred | 158 | sixty one | 24 | forty | 35 | M6(depth)twenty | 8×27 | 7 | a hundred | ninety | 5 | a hundred and fifteen | M8 | twenty | ||
| 45 | 200 | 165 | ||||||||||||||||
| 35 | four hundred | |||||||||||||||||
| nine | 750 | 158.five | ||||||||||||||||
| fifteen,20,twenty five | 750 | 171 | ||||||||||||||||
| 3,5 | one thousand | 177 | ||||||||||||||||
| three,five | 1500 | |||||||||||||||||
| three | 2000 | |||||||||||||||||
Note1) Please inquire to us if motor product isn’t standard (Matching motor record). (The flange dimension may be various if motor assension is different.)
Note2) Rotation of the output shaft is in the same course as that of motor enter.
Note3) All values are inside of the variety corresponding to helical gear.
Mechanism
CZPT help system
1.The planetary equipment is positioned in the middle of the output shaft.
two.The output shaft bearing is positioned at each finishes of the planetary gear.
three.Independent sunshine equipment and coupling.
Compact output shaft system
It adopts the style of output shaft built-in system, compact framework, large rigidity, and it can face up to huge affect. Spot the input coupling and the sunlight gear at the centre of the output shaft to boost the concentricity of the parts, thus efficiently controlling the equipment clearance and bettering the backlash of the total gearbox.
Framework
Full needle framework
The inner bearing of the planetary equipment adopts a complete-needle style, the inner hole is manufactured by a grinding approach, the surface area hardness is HRC60, and the cylindricity is significantly less than .003mm.
Ring equipment structure
The integral construction of the ring gear and the output flange increases its rigidity and reduces misassembly.
Other Product Variety of ZDR Series
Much more products,you should click on listed here…
Company Profile
Shipping
Our Providers
1.Routine maintenance time & Guarantee: 1 calendar year following leaving manufacturing facility.
two.Other service: Including modeling assortment manual, set up guide, and problem capturing guidebook, etc.
FAQ
Q: What’re your main items?
A: We presently produce Brushed DC Motors, Brushed DC Equipment Motors, Planetary DC Gear Motors, Brushless DC Motors, AC Motors, Higher CZPT Planetary CZPT and CZPT Cycloidal CZPT and many others.. You can verify the requirements for previously mentioned motors on our web site and you can e-mail us to suggest essential motors for each your specification way too.
Q: How to pick a suited motor or gearbox?
A:If you have motor images or drawings to show us, or you have in depth specifications, such as, voltage, velocity, torque, motor measurement, operating manner of the motor, necessary lifetime and sound level etc, you should do not wait to allow us know, then we can suggest appropriate motor for every your ask for accordingly.
Q: Do you have a CZPT provider for your common motors or gearboxes?
A: Yes, we can customize for each your request for the voltage, velocity, torque and shaft dimensions/shape. If you need additional wires/cables soldered on the terminal or need to have to add connectors, or capacitors or EMC we can make it way too.
Q: Do you have an individual design and style services for motors?
A: Sure, we would like to design and style motors individually for our clients, but some variety of molds are necessory to be developped which may need to have specific expense and style charging.
Q: What is actually your lead time?
A: CZPTly speaking, our regular normal product will require 15-30days, a bit for a longer time for CZPT products. But we are quite flexible on the guide time, it will count on the distinct orders.
