Zd One – Two Stages High Precision and Helix Gear Round 60mm Ae Series Planetary Gearbox

Zd One - Two Stages High CZPT and Helix Gear Round 60mm Ae Series Planetary CZPT

ZD One particular – Two Levels High CZPT and CZPTx Gear Round 60mm AE Series Planetary CZPT

Merchandise Description

AE Sequence Planetary CZPT furthermore adds front and rear oil seals, employs the output shaft double support framework and style of helix gear, which tends to make the gear meshing  smoother and steady, the AE Sequence can be used in various management transmission fields with servo motors. The backlash of the AE series is considerably less than 5 arc.min and the reduction ratio covers 3~a hundred.

The Product Advantages of Planetary CZPT:

one.Flexible structure layout, in line with different working conditions.
two.Ring gear processing engineering: Making use of inner gear slotting device and hobbling device the precision of ring equipment right after processing can attain GB7.
three.Hardened gear secondary scraping technological innovation: secondary higher-pace dry cutting of gear removes equipment deformation caused by warmth therapy. Gear precision can reach GB6.
4.CZPT backlash testing.

How To Go through
60    AE    10    (  )     (S) – 40   T1
 a       b      c      d        e       f       g

a    Frame Dimension     sixty=60mm
b    Series code: AE     Round mounting flange series
c    Reduction Ratio     One Phase: 3,four,5,six,seven,eight,nine,10
    Two Stages: 15,20,25,30,35,40,forty five,50,60,70,eighty,ninety,a hundred
d    Backlash     Single Stage: ≤5arc.min  
    Two Stages: ≤8arc.min 
e    Input shaft variety     S: All round locking (Omitted) (Regardless of whether the motor has a keyway)
    S1: Locking with locking ring (Regardless no matter whether the motor has a  keyway )
    S2: Locking with keyway (Input shaft with key)
    K: With keyway
    A: Other kinds (Make sure you get in touch with with us)
f Relevant servo motor electricity (W),Please make contact with us for distinct electrical power
g You should speak to us for the mounting type of the flange


Spesifications & Information


Product Sort Device Number Of Phase Reduction Ratio 60AE
Rated Output Torque N.M 1 3 34
4 33
five 38
7 36
8 thirty
10 26
2 twelve forty eight
fifteen forty eight
sixteen forty seven
twenty 47
twenty five fifty
32 forty five
35 forty five
40 forty three
fifty fifty
64 37
eighty 32
a hundred 29
Max. radial force* N 1,two 3~a hundred 750
Max. axial drive* one,2 3~one hundred 375
Full Load Efficiency % 1 three~ten ≥97%
2 15~one hundred ≥94%
Backlash arc.min 1 3~10 ≤5
2 15~one hundred ≤8

*Highest radial force and greatest axial force, when the output is 100rpm, it functions on the middle situation (L/2) of the output shaft.

Dimensions (mm):

Product type No. of stage L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 D1 D2
60AE 1 116 24 57 35 thirty.five 25 two.5 3 thirty ten Φ70 Φ50G7
2 126 sixty seven
No. of stage D3 D4 D5 D6 D7 D8 B1 H1 G1 G2 G3 Q3
1,two ≤14G7 Φ14h7 Φ20 Φ40h7 Φ61 Φ52 5 16 M4×10 M5×10 M5×15 60

Information of AE collection Planetary CZPT


Compact output shaft system

It adopts the style of output shaft built-in method, compact structure, higher rigidity, and it can stand up to big influence. Spot the input coupling and the sun gear at the heart of the output shaft to increase the concentricity of the elements, thus successfully controlling the gear clearance and bettering the backlash of the entire gearbox.


Entire needle construction

The interior bearing of the planetary gear adopts a complete-needle layout, the internal gap is made by a grinding process, the surface area hardness is HRC60, and the cylindricity is significantly less than .003mm.

Compared with AF Series
AF series planetary gearbox utilizes sq. via hole flange, but AE collection makes use of spherical threaded flange.
For other requirements, AE collection planetary gearbox is similar with AF collection.

Other Product Sorts of AE series Planetary CZPT

Much more items,you should click listed here…

Assembly Treatment

You should stick to the ideas bellow to assemble the servo motor and reducer. Other than for specified products, there are various dimensions of servo motors, some motors may possibly not be capable to connect with flanges.As a result, be certain to use the suitable motor which is specified when place your get.


In Scenario Of Assembling A Motor With no Key

one.Take off the rubber cap, switch the enter shaft, and match the head of the bolt to the hole of the rubber cap. Make confident that the fixing bolt is loosened.

2.Gradually place the motor shaft into the input shaft (Guarantee that it is efficiently put in CZPT jam.). Be cautious not to be inserted with the motor tilted.

three.Attach the motor to the reducer and fasten the bolt with specified fastening torque. See Table 1.

four.CZPTen the fixing bolt of the enter shaft with specified fastening torque wrench, and so forth. See Table two.

5.Put on the rubber cap.


Desk one

Motor Combination Bolt CZPTening Torque
(N·m) (kgf·cm)
M3 one. 10
M4 three. thirty
M5 5.eight 60
M6 nine.eight one hundred
M8 19.6 two hundred
M10 39.two 400
M12 68.six seven-hundred
M16 168 1650

Table two

Combination Bolt CZPTening Torque
(N·m) (kgf·cm)
M3 one.five 15
M4 3.five 35
M5 seven.one seventy one
M6 12 one hundred twenty
M8 30 300
M10 60 612


Firm Profile


Our Services

one.Maintenance time & Guarantee: one 12 months soon after leaving manufacturing facility 
two.Other service: Such as modeling variety guide, set up information, and problem shooting guide, etc.


Q: What’re your main goods?
A: We currently produce Brushed DC Motors, Brushed DC Gear Motors, Planetary DC Gear Motors, Brushless DC Motors, AC Motors, Substantial CZPT Planetary CZPT and CZPT Cycloidal CZPT etc.. You can check the specs for above motors on our web site and you can email us to advocate needed motors per your specification as well.

Q: How to select a suited motor or gearbox?
A:If you have motor images or drawings to display us, or you have comprehensive technical specs, this kind of as, voltage, velocity, torque, motor measurement, functioning method of the motor, essential life span and noise stage and so on, remember to do not be reluctant to allow us know, then we can recommend suited motor for each your request appropriately.

Q: Do you have a CZPT services for your standard motors or gearboxes?
A: Indeed, we can personalize for each your request for the voltage, velocity, torque and shaft size/shape. If you require further wires/cables soldered on the terminal or require to incorporate connectors, or capacitors or EMC we can make it way too.

Q: Do you have an person design support for motors?
A: Of course, we would like to style motors separately for our consumers, but some type of  molds are necessory to be developped which might require specific expense and design charging. 

Q: What’s your guide time?
A: CZPTly speaking, our regular regular merchandise will need fifteen-30days, a little bit lengthier for CZPT merchandise. But we are really versatile on the lead time, it will count on the distinct orders.


Zd One - Two Stages High CZPT and Helix Gear Round 60mm Ae Series Planetary CZPT