Merchandise Description
Major Characteristics:
one) Manufactured of higher quality substance, non-rustingBoth flange and foot mounting CZPT and appropriate for all-round set up
2) Large output torque and high radiating effectiveness
3)Specific grinding helical gear with Smooth operating and low sounds, no deformation,can operate extended time in dreadful situation
4)Nice visual appeal, durable provider existence and little quantity, compact framework
five)Equally two and a few stage CZPT with vast ratio range from five to two hundred
6)CZPT output shaft diameter CZPT 18-22-28-32-40-50mm
7)Modular building enlarge ratio from 5 to 1400
Principal Resources:
one)housing with aluminium alloyand cast iron material
two)Output Shaft Content:20CrMnTi
three)Good top quality no noise bearings to keep lengthy support existence
4)Higher performance oil seal to avoid from oil leakage
Programs:
G3 Series helical gear motor are extensive utilised for all sorts of computerized gear, these kinds of as chip elimination device, conveyor, packaging products, woodworking machinery, farming equipment, slurry scraper ,dryer, mixer and so on.
Thorough Pictures
Solution Parameters
(n1=1400r/min 50hz) | |||||||||||||||||
norminal ratio | 5 | ten | 15 | twenty | 25 | 30 | 40 | fifty | 60 | eighty | one hundred | 100 | a hundred and twenty | a hundred and sixty | 200 | ||
.1kw | output shaft | Ø18 | Ø22 | ||||||||||||||
n2* (r/min) | 282 | 138 | ninety two | 70 | fifty six | forty six | 35 | 28 | 23 | 18 | fourteen | – | eleven | 9 | seven | ||
M2(Nm) | 50hz | three.2 | 6.five | nine.eight | 12.nine | 16.one | 19.six | 25.7 | 31.1 | 37.five | 49.5 | 62.nine | – | 76.1 | a hundred.7 | 125.four | |
60hz | three | 5 | eight | eleven | thirteen | seventeen | 21 | 26 | 31 | 41 | 52 | – | 63 | 84 | one hundred and five | ||
Fr1(N) | 588 | 882 | 980 | 1180 | 1270 | 1370 | 1470 | 1570 | 2160 | 2450 | 2450 | 2450 | 2450 | 2450 | 2450 | ||
Fr2(N) | 176 | ||||||||||||||||
norminal ratio | five | ten | fifteen | twenty | twenty five | thirty | forty | fifty | sixty | 80 | a hundred | 100 | one hundred twenty | a hundred and sixty | two hundred | ||
.2kw | output shaft | Ø18 | Ø22 | Ø28 | |||||||||||||
n2* (r/min) | 282 | 138 | ninety two | 70 | 56 | forty five | 35 | 29 | 23 | eighteen | fourteen | thirteen | 12 | 8 | 7 | ||
M2(Nm) | 50hz | six.5 | twelve.six | 19.1 | 26.3 | 32.six | 38.nine | 50.four | 63 | seventy five.6 | one hundred.8 | 103.nine | 125.four | 150 | 200.four | 250.7 | |
60hz | 5.four | 10.5 | sixteen.six | 21.9 | 27.one | 32.four | 42 | fifty two.five | 63 | 84 | 86.6 | 104.five | 125 | 167 | 208.9 | ||
Fr1(N) | 588 | 882 | 980 | 1180 | 1270 | 1760 | 1860 | 1960 | 2160 | 2450 | 2450 | 2840 | 3330 | 3430 | 3430 | ||
Fr2(N) | 196 | ||||||||||||||||
norminal ratio | five | ten | 15 | 20 | 25 | 30 | 40 | fifty | 60 | eighty | one hundred | 100 | a hundred and twenty | a hundred and sixty | two hundred | ||
.4kw | output shaft | Ø22 | Ø28 | Ø32 | |||||||||||||
n2* (r/min) | 288 | one hundred forty four | ninety two | 72 | 58 | forty seven | 36 | 29 | 24 | 18 | 14 | 14 | 12 | nine | seven | ||
M2(Nm) | 50hz | twelve.9 | twenty five | 38.6 | 51.4 | sixty five.four | seventy eight.two | 100.7 | a hundred twenty five.4 | one hundred fifty | 200.4 | 206.8 | 250.7 | 301.one | four hundred.seven | 461.8 | |
60hz | 10.seven | twenty.8 | 32.1 | forty two.nine | 54.five | sixty five.two | 83.nine | 104.5 | one hundred twenty five | 167 | 172.3 | 208.9 | 250.nine | 333.nine | 384.8 | ||
Fr1(N) | 882 | 1180 | 1370 | 1470 | 1670 | 2550 | 2840 | 3140 | 3430 | 3430 | 3430 | 4900 | 5880 | 5880 | 5880 | ||
Fr2(N) | 245 | ||||||||||||||||
norminal ratio | five | 10 | fifteen | 20 | twenty five | thirty | 40 | fifty | sixty | eighty | a hundred | a hundred | 120 | a hundred and sixty | two hundred | ||
.75kw | output shaft | Ø28 | Ø32 | Ø40 | |||||||||||||
n2* (r/min) | 278 | a hundred and forty | 94 | 69 | 58 | forty six | 35 | 29 | 24 | eighteen | fourteen | 14 | 11 | 9 | seven | ||
M2(Nm) | 50hz | 24.6 | 48.2 | seventy two.nine | ninety seven.five | 122.one | one hundred forty five.7 | 187.five | 235.7 | 282.nine | 376.1 | 387.9 | 439 | 527 | 703 | 764 | |
60hz | twenty.five | forty.2 | 60.seven | eighty one.three | 201.eight | 121.4 | 156.three | 196.four | 235.seven | 313.four | 323.2 | 366 | 439 | 585 | 732 | ||
Fr1(N) | 1270 | 1760 | 2160 | 2350 | 2450 | 4571 | 4210 | 4610 | 5490 | 5880 | 5880 | 7060 | 7060 | 7060 | 7060 | ||
Fr2(N) | 294 | ||||||||||||||||
norminal ratio | 5 | ten | fifteen | twenty | twenty five | thirty | forty | fifty | 60 | 80 | 100 | 100 | 120 | one hundred sixty | 200 | ||
one.5kw | output shaft | Ø32 | Ø40 | Ø50 | |||||||||||||
n2* (r/min) | 280 | 140 | 93 | 70 | 55 | 47 | 34 | 27 | 24 | 17 | fourteen | 13 | 12 | eight | 7 | ||
M2(Nm) | 50hz | 48.two | 97.five | one hundred forty five.7 | 193.9 | 242.one | 272 | 351 | 439 | 527 | 703 | 724 | 878 | 1060 | 1230 | 1230 | |
60hz | forty.two | eighty one.3 | 121.four | 161.6 | 201.eight | 226 | 293 | 366 | 439 | 585 | 603 | 732 | 878 | 1170 | 1230 | ||
Fr1(N) | 1760 | 2450 | 2840 | 3230 | 3820 | 5100 | 5880 | 7060 | 7060 | 7060 | 7060 | 9800 | 9800 | 9800 | 9800 | ||
Fr2(N) | 343 | ||||||||||||||||
norminal ratio | five | ten | 15 | 20 | 25 | thirty | forty | fifty | 60 | 80 | a hundred | ||||||
two.2kw | output shaft | Ø40 | Ø50 | ||||||||||||||
n2* (r/min) | 272 | 136 | ninety five | sixty eight | 54 | forty five | 36 | 28 | 24 | 18 | 14 | ||||||
M2(Nm) | 50hz | sixty seven | 133 | 200 | 266 | 332 | 399 | 515 | 644 | 773 | 1571 | 1230 | |||||
60hz | 56 | 111 | 167 | 221 | 277 | 332 | 429 | 537 | 644 | 858 | 1080 | ||||||
Fr1(N) | 2160 | 3140 | 3530 | 4571 | 4700 | 6960 | 7250 | 8620 | 9800 | 9800 | 9800 | ||||||
Fr2(N) | 392 |
Outline and mounting dimension:
G3FM: Three Phase Equipment MOTOR WITH FLANGE (n1=1400r/min) | ||||||||||||||||||||
Energy kw | output shaft | ratio | A | F | I | J | M | O | O1 | P | Q | R | S | T | U | W | X | Y | Y1 | |
regular | brake | |||||||||||||||||||
.1kw | Ø18 | 5-ten-fifteen-20-twenty five-thirty-40-50 | 236 | 270 | 192.five | eleven | 16.five | a hundred and seventy | four | 10 | thirty | 145 | 35 | 18 | 20.five | 129 | 6 | 157 | 80 | eighty one |
Ø22 | 60-80-100-120-a hundred and sixty-two hundred | 262 | 296 | 197.five | eleven | 19 | 185 | four | 12 | 40 | 148 | 47 | 22 | 24.five | 129 | six | 171.5 | 89.5 | eighty three.5 | |
.2kw | Ø18 | 5-10-15-20-twenty five | 267 | 270 | 192.five | 11 | 16.5 | one hundred seventy | 4 | ten | 30 | a hundred forty five | 35 | 18 | 20.5 | 129 | six | 161 | 80 | 81 |
Ø22 | 30-forty-fifty-60-eighty-100 | 293 | 296 | 197.five | 11 | 19 | 185 | 4 | twelve | forty | 148 | 47 | 22 | 24.5 | 129 | 6 | 171.five | 89.5 | eighty three.5 | |
Ø28 | one hundred-one hundred twenty-160-200 | 306 | 309.five | 208.five | 11 | 23.5 | 215 | 4 | fifteen | 45 | 170 | fifty | 28 | 31 | 129 | 8 | 198.five | one hundred and five.five | 88 | |
.4kw | Ø22 | 5-ten-15-20-25 | 314 | 324.5 | 204 | eleven | 19 | 185 | four | 12 | forty | 148 | forty seven | 22 | 24.five | 139 | 6 | 171.five | 89.five | 88.5 |
Ø28 | thirty-40-fifty-60-80-a hundred | 330 | 337.five | 215 | 11 | 23.five | 215 | 4 | 15 | forty five | 170 | fifty | 28 | 31 | 139 | eight | 198.five | one hundred and five.five | 93 | |
Ø32 | a hundred-a hundred and twenty-one hundred sixty-two hundred | 349 | 357 | 229.five | 13 | 28.5 | 250 | four | 15 | fifty five | 180 | sixty | 32 | 35 | 139 | 10 | 234 | 126 | 98 | |
.75kw | Ø28 | five-ten-fifteen-twenty-twenty five | 350.five | 343.5 | 227.5 | 11 | 23.five | 215 | 4 | fifteen | 45 | 170 | fifty | 28 | 31 | 159 | eight | 198.5 | one zero five.5 | 103 |
Ø32 | thirty-forty-fifty-60-eighty-one hundred | 379.5 | 387 | 242 | thirteen | 28.five | 250 | four | fifteen | fifty five | one hundred eighty | sixty | 32 | 35 | 159 | 10 | 234 | 126 | 108 | |
Ø40 | 100-120-a hundred and sixty-200 | 401.five | 408.5 | 270 | eighteen | 34 | 310 | 5 | eighteen | 65 | 230 | seventy one | 40 | forty three | 185 | twelve | 284 | 149 | 126.5 | |
one.5kw | Ø32 | five-ten-15-twenty-25 | 420.five | 441 | 254 | 13 | 28.5 | 250 | 5 | 15 | 55 | 180 | sixty | 32 | 35 | 185 | ten | 234 | 126 | 121 |
Ø40 | 30-40-50-60-80-a hundred | 457.five | 478 | 270 | eighteen | 34 | 310 | 5 | 18 | sixty five | 230 | 71 | 40 | 43 | 185 | twelve | 284 | 149 | 126.5 | |
Ø50 | 100-120-a hundred and sixty-200 | 485.five | 506 | 300 | 22 | 40 | 360 | five | twenty five | 75 | 270 | eighty three | 50 | 53.5 | 185 | 14 | 325 | 173.5 | 132.five | |
2.2kw | Ø40 | five-ten-15-twenty-twenty five | 466.5 | 487 | 270 | 18 | 34 | 310 | 5 | eighteen | 65 | 230 | seventy one | forty | forty three | 185 | 12 | 284 | 149 | 126.five |
Ø50 | thirty-40-fifty-sixty-eighty-a hundred | 510.5 | 531 | three hundred | 22 | 40 | 360 | five | twenty five | seventy five | 270 | 83 | fifty | 53.five | 185 | 14 | 325 | 173.5 | 132.5 |
G3LM: 3 Phase Equipment MOTOR WITH FOOT (n1=1400r/min) | ||||||||||||||||||||
Electricity kw | output shaft | ratio | A | D | E | F | J | G | H | K | P | S | T | U | V | W | X | Y | Y1 | |
standard | brake | |||||||||||||||||||
.1kw | Ø18 | 5-ten-fifteen-20-25-30-forty-50 | 236 | 270 | 40 | a hundred and ten | 135 | sixteen.five | 65 | 9 | forty five | 30 | eighteen | 20.five | 129 | 183 | 6 | 133 | eighty five | 10 |
Ø22 | 60-80-one hundred-one hundred twenty-one hundred sixty-two hundred | 262 | 296 | 65 | a hundred thirty | a hundred and fifty five | 19 | 90 | 11 | 55 | forty | 22 | 24.five | 129 | 193 | six | 139.five | 90 | twelve | |
.2kw | Ø18 | 5-10-15-twenty-25 | 267 | 270 | 40 | 110 | one hundred thirty five | 16.5 | 65 | 9 | 45 | thirty | 18 | 20.five | 129 | 183 | six | 133 | 85 | 10 |
Ø22 | thirty-40-50-sixty-eighty-100 | 293 | 296 | sixty five | a hundred thirty | one hundred fifty five | 19 | ninety | eleven | 55 | 40 | 22 | 24.5 | 129 | 193 | 6 | 139.5 | 90 | twelve | |
Ø28 | one hundred-120-one hundred sixty-two hundred | 306 | 309.5 | ninety | one hundred forty | 175 | 23.5 | 125 | eleven | sixty five | forty five | 28 | 31 | 129 | 203 | eight | a hundred and seventy | one hundred ten | 15 | |
.4kw | Ø22 | five-10-15-20-twenty five | 314 | 324.five | 65 | 130 | one hundred fifty five | 19 | ninety | 11 | fifty five | 40 | 22 | 24.5 | 139 | 199.5 | six | 141.5 | 90 | twelve |
Ø28 | 30-40-50-sixty-eighty-a hundred | 330 | 337.five | 90 | 140 | one hundred seventy five | 23.5 | 125 | 11 | sixty five | 45 | 28 | 31 | 139 | 210 | 8 | one hundred seventy | a hundred and ten | 15 | |
Ø32 | 100-120-one hundred sixty-200 | 349 | 357 | a hundred thirty | one hundred seventy | 208 | 28.5 | one hundred seventy | 13 | 70 | fifty five | 32 | 35 | 139 | 226 | ten | 198 | 130 | 18 | |
.75kw | Ø28 | five-10-15-twenty-twenty five | 350.5 | 343.five | 90 | one hundred forty | 175 | 23.5 | a hundred twenty five | 11 | sixty five | 45 | 28 | 31 | 159 | 222 | eight | one hundred seventy | a hundred and ten | fifteen |
Ø32 | 30-forty-fifty-sixty-eighty-a hundred | 379.five | 387 | 130 | one hundred seventy | 208 | 28.5 | 170 | 13 | 70 | 55 | 32 | 35 | 159 | 238.5 | ten | 198 | 130 | eighteen | |
Ø40 | 100-one hundred twenty-a hundred and sixty-200 | 401.five | 408.five | one hundred fifty | 210 | 254 | 34 | 196 | 15 | 90 | sixty five | forty | 43 | 185 | 249 | twelve | 230 | a hundred and fifty | 20 | |
1.5kw | Ø32 | five-ten-15-twenty-25 | 420.five | 441 | a hundred thirty | one hundred seventy | 208 | 28.five | one hundred seventy | thirteen | 70 | 55 | 32 | 35 | 185 | 250.5 | ten | 198 | 130 | eighteen |
Ø40 | thirty-40-50-60-80-100 | 457.5 | 478 | 150 | 210 | 254 | 34 | 196 | 15 | 90 | sixty five | 40 | forty three | 185 | 260 | twelve | 230 | 150 | twenty | |
Ø50 | one hundred-a hundred and twenty-160-two hundred | 485.five | 506 | a hundred and sixty | 230 | 290 | forty | 210 | 18 | 100 | 75 | 50 | 53.5 | 185 | 288 | fourteen | 265 | 170 | twenty five | |
two.2kw | Ø40 | 5-ten-15-20-25 | 466.five | 487 | one hundred fifty | 210 | 254 | 34 | 196 | fifteen | 90 | 65 | forty | 43 | 185 | 260 | 12 | 230 | a hundred and fifty | twenty |
Ø50 | thirty-40-fifty-sixty-80-one hundred | 510.5 | 531 | one hundred sixty | 230 | 290 | forty | 210 | 18 | one hundred | seventy five | fifty | 53.five | 185 | 288 | fourteen | 265 | a hundred and seventy | 25 |
G3FS: IEC Equipment REDUCER WITH FOOT (n1=1400r/min) | |||||||||||||||||||||||||
Electricity kw | output shaft | ratio | A | B | C | F | I | J | L | M | N | O | O1 | P | Q | R | S | S1 | T | T1 | W | W1 | X | Y | Y1 |
.12kw | Ø18 | five-ten-15-twenty-25-thirty-forty-50 | 147 | ninety five | 115 | 154 | 11 | 16.five | 4.5 | one hundred seventy | one hundred forty | four | 10 | thirty | 145 | 35 | 18 | 11 | 20.five | 12.eight | 6 | four | 163 | eighty | 86.5 |
Ø22 | sixty-eighty-a hundred-a hundred and twenty-a hundred and sixty-200 | 173 | ninety five | one hundred fifteen | 164 | 11 | 19 | four.five | 185 | one hundred forty | 4 | 12 | forty | 148 | forty seven | 22 | 11 | 24.five | twelve.8 | 6 | 4 | 171.five | 89.five | 89 | |
.18kw | Ø18 | 5-10-15-20-25 | 147 | ninety five | a hundred and fifteen | 154 | eleven | sixteen.5 | four.five | one hundred seventy | a hundred and forty | four | 10 | thirty | a hundred forty five | 35 | eighteen | 11 | twenty.five | twelve.eight | 6 | 4 | 163 | 80 | 86.5 |
Ø22 | 30-forty-fifty-60-80-one hundred | 173 | ninety five | one hundred fifteen | 164 | eleven | 19 | four.5 | 185 | 140 | 4 | 12 | forty | 148 | forty seven | 22 | eleven | 24.5 | twelve.eight | six | 4 | 171.5 | 89.five | 89 | |
Ø28 | one hundred-a hundred and twenty-one hundred sixty-200 | 186.five | ninety five | one hundred fifteen | 186 | eleven | 23.five | four.5 | 215 | one hundred forty | four | fifteen | forty five | a hundred and seventy | 50 | 28 | eleven | 31 | 12.eight | eight | four | 198.five | one zero five.five | ninety three.5 | |
.37kw | Ø22 | five-10-15-20-twenty five | 181.five | a hundred and ten | one hundred thirty | 164 | eleven | 19 | 4.five | 185 | one hundred sixty | 4 | 12 | forty | 148 | forty seven | 22 | 14 | 24.five | sixteen.three | six | five | 201 | 89.five | 99 |
Ø28 | 30-forty-50-sixty-eighty-100 | 198 | one hundred ten | one hundred thirty | 186 | 11 | 23.five | four.5 | 215 | 160 | four | 15 | forty five | 170 | fifty | 28 | fourteen | 31 | sixteen.3 | eight | five | 198.five | a hundred and five.five | 103.5 | |
Ø32 | 100-a hundred and twenty-a hundred and sixty-200 | 216.5 | a hundred and ten | one hundred thirty | 215 | 13 | 28.5 | four.5 | 250 | 160 | 4 | fifteen | 55 | a hundred and eighty | sixty | 32 | fourteen | 35 | sixteen.3 | 10 | five | 234 | 126 | 108.five | |
.75kw | Ø28 | 5-ten-fifteen-twenty-twenty five | 206.five | 130 | a hundred sixty five | 185 | eleven | 23.five | 4.5 | 215 | 200 | four | fifteen | 45 | 170 | 50 | 28 | 19 | 31 | 21.eight | 8 | 6 | 216.five | one hundred and five.5 | 123.five |
Ø32 | 30-40-50-sixty-80-100 | 235 | one hundred thirty | 165 | 215 | thirteen | 28.5 | 4.five | 250 | 200 | 4 | 15 | fifty five | 180 | 60 | 32 | 19 | 35 | 21.8 | ten | six | 236.5 | 126 | 128.5 | |
Ø40 | a hundred-120-a hundred and sixty-200 | 260.five | a hundred thirty | 165 | 270 | 18 | 34 | 4.5 | 310 | 200 | 5 | 18 | sixty five | 230 | seventy one | forty | 19 | forty three | 21.8 | twelve | eight | 284 | 149 | 134 | |
1.5kw | Ø32 | five-10-fifteen-20-twenty five | 252 | 130 | a hundred sixty five | 215 | 13 | 28.five | 4.five | 250 | 200 | five | fifteen | fifty five | one hundred eighty | sixty | 32 | 24 | 35 | 27.three | 10 | 8 | 236.5 | 126 | 128.five |
Ø40 | 30-forty-50-60-eighty-one hundred | 293.five | a hundred thirty | 165 | 270 | eighteen | 34 | four.5 | 310 | two hundred | 5 | 18 | 65 | 230 | seventy one | forty | 24 | 43 | 27.three | 12 | 8 | 284 | 149 | 134 | |
Ø50 | one hundred-a hundred and twenty-a hundred and sixty-two hundred | 321.five | a hundred thirty | 165 | 300 | 22 | forty | four.five | 360 | 200 | five | 25 | seventy five | 270 | eighty three | 50 | 24 | fifty three.five | 27.three | 14 | eight | 323.5 | 173.five | a hundred and forty | |
two.2kw | Ø40 | 5-ten-fifteen-20-25 | 290 | 180 | 215 | 270 | 18 | 34 | 5.five | 310 | 250 | five | eighteen | sixty five | 230 | 71 | forty | 28 | 43 | 31.three | 12 | eight | 284 | 149 | 134 |
Ø50 | thirty-forty-fifty-sixty-80-one hundred | 334 | 180 | 215 | three hundred | 22 | 40 | five.five | 360 | 250 | 5 | 25 | seventy five | 270 | 83 | 50 | 28 | fifty three.5 | 31.3 | fourteen | eight | 323.five | 173.5 | one hundred forty |
G3LS: IEC Equipment REDUCER WITH FOOT (n1=1400r/min) | |||||||||||||||||||||||||
Electricity kw | output shaft | ratio | A | B | C | D | E | F | G | H | J | K | L | N | P | S | S1 | T | T1 | W | W1 | X | Y | Y1 | Z |
.12kw | Ø18 | 5-ten-15-twenty-twenty five-30-40-fifty | 147 | ninety five | a hundred and fifteen | forty | a hundred and ten | 135 | sixty five | 9 | 16.five | forty five | 4.five | 140 | 30 | eighteen | eleven | 20.5 | 12.eight | six | four | 138.5 | eighty five | 10 | M8 |
Ø22 | 60-80-100-120-one hundred sixty-two hundred | 173 | ninety five | a hundred and fifteen | 65 | one hundred thirty | 154 | ninety | 11 | 19 | 55 | four.five | 140 | 40 | 22 | 11 | 24.five | 12.eight | 6 | 4 | 141 | ninety | 12 | M8 | |
.18kw | Ø18 | 5-10-fifteen-20-twenty five | 147 | ninety five | 115 | 40 | 110 | 135 | sixty five | 9 | sixteen.five | forty five | four.5 | one hundred forty | 30 | 18 | 11 | twenty.five | twelve.eight | 6 | 4 | 138.five | 85 | ten | M8 |
Ø22 | 30-40-fifty-sixty-eighty-one hundred | 173 | 95 | a hundred and fifteen | 65 | 130 | 154 | 90 | 11 | 19 | fifty five | four.5 | a hundred and forty | forty | 22 | eleven | 24.5 | 12.eight | six | four | 141 | ninety | 12 | M8 | |
Ø28 | a hundred-a hundred and twenty-a hundred and sixty-two hundred | 186.5 | 95 | one hundred fifteen | 90 | one hundred forty | one hundred seventy five | a hundred twenty five | eleven | 23.5 | 65 | 4.5 | 140 | forty five | 28 | 11 | 31 | twelve.eight | 8 | 4 | one hundred seventy | a hundred and ten | fifteen | M8 | |
.37kw | Ø22 | 5-ten-fifteen-twenty-twenty five | 181.5 | a hundred and ten | one hundred thirty | 65 | 130 | 154 | ninety | 11 | 19 | fifty five | four.5 | one hundred sixty | 40 | 22 | 14 | 24.5 | 16.three | 6 | five | 151 | 90 | 12 | M8 |
Ø28 | thirty-forty-fifty-sixty-80-one hundred | 198 | a hundred and ten | a hundred thirty | ninety | a hundred and forty | 175 | one hundred twenty five | eleven | 23.five | 65 | four.5 | one hundred sixty | forty five | 28 | fourteen | 31 | 16.three | eight | 5 | a hundred and seventy | 110 | fifteen | M8 | |
Ø32 | 100-120-160-two hundred | 216.five | a hundred and ten | 130 | one hundred thirty | a hundred and seventy | 208 | a hundred and seventy | thirteen | 28.5 | 70 | four.five | a hundred and sixty | fifty five | 32 | fourteen | 35 | sixteen.3 | ten | 5 | 198 | one hundred thirty | eighteen | M8 | |
.75kw | Ø28 | five-ten-15-20-twenty five | 206.five | 130 | one hundred sixty five | ninety | 140 | 175 | one hundred twenty five | 11 | 23.5 | sixty five | four.5 | two hundred | 45 | 28 | 19 | 31 | 21.eight | 8 | six | 186.five | one hundred ten | fifteen | M10 |
Ø32 | thirty-40-fifty-60-80-100 | 235 | a hundred thirty | 165 | one hundred thirty | 170 | 208 | one hundred seventy | 13 | 28.5 | 70 | four.five | two hundred | 55 | 32 | 19 | 35 | 21.8 | ten | six | 201.5 | one hundred thirty | eighteen | M10 | |
Ø40 | a hundred-120-a hundred and sixty-200 | 260.five | one hundred thirty | one hundred sixty five | one hundred fifty | 210 | 254 | 196 | fifteen | 34 | ninety | 4.five | 200 | 65 | 40 | 19 | forty three | 21.8 | twelve | 8 | 230 | 150 | 20 | M10 | |
1.5kw | Ø32 | five-ten-fifteen-20-twenty five | 252 | 130 | one hundred sixty five | one hundred thirty | a hundred and seventy | 208 | one hundred seventy | thirteen | 28.5 | 70 | four.5 | two hundred | 55 | 32 | 24 | 35 | 27.3 | 10 | 8 | 201.5 | a hundred thirty | eighteen | M10 |
Ø40 | 30-40-fifty-60-eighty-a hundred | 293.five | one hundred thirty | 165 | one hundred fifty | 210 | 254 | 196 | 15 | 34 | ninety | 4.5 | two hundred | sixty five | forty | 24 | 43 | 27.3 | twelve | eight | 230 | 150 | 20 | M10 | |
Ø50 | a hundred-a hundred and twenty-a hundred and sixty-two hundred | 321.five | 130 | one hundred sixty five | 160 | 230 | 290 | 210 | eighteen | forty | 100 | four.5 | two hundred | seventy five | fifty | 24 | fifty three.five | 27.3 | fourteen | 8 | 265 | one hundred seventy | twenty five | M10 | |
2.2kw | Ø40 | 5-10-fifteen-twenty-25 | 290 | 180 | 215 | one hundred fifty | 210 | 254 | 196 | 15 | 34 | 90 | 5.five | 250 | 65 | forty | 28 | forty three | 31.3 | twelve | 8 | 230 | one hundred fifty | twenty | M12 |
Ø50 | thirty-40-50-60-80-100 | 334 | a hundred and eighty | 215 | a hundred and sixty | 230 | 290 | 210 | 18 | 40 | 100 | 5.five | 250 | seventy five | fifty | 28 | fifty three.5 | 31.3 | 14 | eight | 265 | 170 | 25 | M12 |
Company Profile
We are a professional reducer maker located in HangCZPT, ZHangCZPTg province.Our major merchandise is full variety of RV571-a hundred and fifty worm reducers , also provided GKM hypoid helical gearbox, GRC inline helical gearbox, Laptop models, UDL Variators and AC Motors, G3 helical equipment motor.Items are extensively employed for applications these kinds of as: foodstuffs, ceramics, packing, chemicals, pharmacy, plastics, paper-making, design machinery, metallurgic mine, environmental safety engineering, and all sorts of automatic traces, and assembly strains.With quickly delivery, exceptional after-income provider, CZPTd generating facility, our goods offer well both at property and abroad. We have exported our reducers to Southeast Asia, CZPT CZPTpe and the Center CZPT and so on.Our aim is to produce and innovate on the basis of substantial quality, and develop a good reputation for reducers.
Workshop:
Exhibition
ZheCZPT PTC Fair:
Packaging & Delivery
Right after Income Provider
one.Maintenance Time and Guarantee:Inside 1 12 months soon after acquiring items.
two.Other Service: Such as modeling choice information, installation guidebook, and issue resolution information, etc
FAQ
1.Q:Can you make as per client drawing?
A: Sure, we offer you CZPT support for customers accordingly. We can use customer’s nameplate for gearboxes.
two.Q:What is your phrases of payment ?
A: 30% deposit ahead of production,harmony T/T before delivery.
three.Q:Are you a trading company or maker?
A:We are a manufacurer with CZPTd equipment and knowledgeable employees.
four.Q:What is actually your production capability?
A:4000-5000 PCS/Thirty day period
five.Q:Totally free sample is CZPT or not?
A:Sure, we can source free sample if buyer concur to pay out for the courier cost
6.Q:Do you have any certificate?
A:Yes, we have CE certificate and SGS certificate report.
Make contact with information:
Ms Lingel Pan
For any queries just feel free of charge ton get in touch with me. Many thanks for your type attention to our business!