PGRH Collection
Products Features:
(1) Reduced Noise:Underneath 65db.
(2) Low Backlash:Backlash is under 3 arcmin . Backlash for two-phase speed reduction is with in 5 arcmin.
(three) High Effectiveness:one-stage up to ninety five% or more,two-phase up to ninety two% or far more.
(4) High Input Pace:Input pace allows for up to 8000RPM.
(five) High Torque:Higher torque output than that of conventional planetary gear reducers
(six) Maintenance-Free of charge:Minimal grease wear,can be life time lubrication
(seven) High Speed Reduction Ratio:Velocity ratio is above one/a thousand.
Advantage:
Use:
- Aerospace,military market.
- Health-related overall health,electronic info business.
- CZPT robots,Generation automation,CNC device resource manufacturing sector.
- Motor,Textile,Printing,Foodstuff,CZPTlurgical.
- Environmental safety engineering,Warehouse logistics business.
Product ILLUMINATE:
Gear BOX Efficiency Info:
MODUL NO. | Phase | RATIO¹ | PGRH42 | PGRH60 | PGRH90 | PGRH115 | PGRH142 | PGRH180 | PGRH220 | |
Rated output torque T2N | Nm | one | 3 | 20 | 55 | 130 | 208 | 342 | 588 | 1,140 |
four | 19 | 50 | 140 | 290 | 542 | one,050 | 1,700 | |||
5 | 22 | 60 | 160 | 330 | 650 | one,200 | two,000 | |||
6 | 20 | 55 | 150 | 310 | 600 | one,100 | 1,900 | |||
seven | 19 | 35 | 140 | 300 | 550 | one,100 | 1,800 | |||
eight | 17 | 35 | 120 | 260 | 500 | one,000 | one,600 | |||
ten | 14 | 37 | 95 | 220 | 370 | 800 | 1,220 | |||
14 | – | 35 | 140 | 300 | 550 | 1,100 | one,800 | |||
twenty | – | 37 | 95 | 220 | 370 | 800 | one,220 | |||
2 | 15 | 20 | 50 | 130 | 208 | 342 | 588 | 1,140 | ||
20 | 19 | 60 | 140 | 290 | 542 | 1,050 | 1,700 | |||
25 | 22 | 60 | 160 | 330 | 650 | 1,200 | 2,000 | |||
30 | 22 | 60 | 160 | 330 | 650 | 1,200 | 2,000 | |||
35 | 22 | 60 | 160 | 330 | 650 | one,200 | 2,000 | |||
forty | 22 | 60 | 160 | 330 | 650 | 1,200 | 2,000 | |||
50 | 22 | 60 | 160 | 330 | 650 | 1,200 | 2,000 | |||
sixty | 22 | 60 | 160 | 330 | 650 | one,200 | two,000 | |||
70 | 22 | 60 | 160 | 330 | 650 | 1,200 | two,000 | |||
eighty | 22 | 60 | 160 | 330 | 650 | 1,200 | two,000 | |||
a hundred | 22 | 60 | 95 | 220 | 370 | 800 | 1,220 | |||
one hundred twenty | – | – | 150 | 310 | 600 | one,100 | 1,900 | |||
a hundred and forty | – | – | 140 | 300 | 550 | 1,100 | 1,800 | |||
160 | – | – | 120 | 260 | 500 | one,000 | 1,600 | |||
200 | – | – | 48 | 140 | 370 | 520 | 1,220 | |||
MAX. output torqueT2B | Nm | one,two | 3~200 | 3 times of Nominal Output Torque | ||||||
Rated input speed n1 | rpm | 1,two | 3~200 | 5,000 | five,000 | 4,000 | 4,000 | 3,000 | 3,000 | two,000 |
MAX.input speed n1B | rpm | 1,2 | 3~two hundred | ten,000 | 10,000 | eight,000 | eight,000 | 6,000 | 6,000 | four,000 |
Micro Backlash P0 | arcmin | 1 | 3~20 | – | – | ≤2 | ≤2 | ≤2 | ≤2 | ≤2 |
two | fifteen~two hundred | – | – | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 | ||
CZPT Backlash P1 | arcmin | one | 3~20 | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 |
2 | 15~200 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ||
CZPT Backlash P2 | arcmin | 1 | 3~twenty | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 |
2 | 15~two hundred | ≤9 | ≤9 | ≤9 | ≤9 | ≤9 | ≤9 | ≤9 | ||
Torsional stiffness | Nm/arcmin | one,two | three~two hundred | three | seven | 14 | 25 | 50 | one hundred forty five | 225 |
Max.radial force F2rB² | N | one,2 | 3~two hundred | 780 | 1,530 | 3,250 | 6,700 | 9,400 | fourteen,500 | fifty,000 |
MAX.axial force F2a1B² | N | one,2 | three~200 | 350 | 630 | one,300 | three,000 | 4,000 | 6,200 | 35,000 |
MAX.axial force F2a2B² | N | 1,two | 3~200 | 390 | 765 | 1,625 | three,350 | 4,700 | seven,250 | twenty five,000 |
Service life | hr | one,two | 3~200 | twenty,000* | ||||||
Work efficiency η | % | one | 3~twenty | ≥97 | ||||||
two | fifteen~200 | ≥94 | ||||||||
Bodyweight | kg | one | 3~twenty | .9 | two.one | six.four | thirteen | 24.5 | 51 | eighty three |
2 | fifteen~200 | one.two | 1.5 | 7.8 | 14.2 | 27.5 | 54 | ninety five | ||
Operating temperature | ºC | one,2 | three~two hundred | -10ºC~+90ºC | ||||||
Lubrication | 1,2 | three~200 | Synthetic lubricating oil | |||||||
Protection level | 1,two | three~200 | IP65 | |||||||
Installation direction | 1,two | 3~two hundred | Any direction | |||||||
Noise level(n1=3000rpm) | dB | one,2 | three~two hundred | ≤61 | ≤63 | ≤65 | ≤68 | ≤70 | ≤72 | ≤74 |
Define DIMENSION:
Company View:
HangCZPT CZPT CZPT & CZPTal Co., Ltd. is a subsidiary of ZheCZPT Jun Yi CZPT. Jun Yi CZPT was launched in March 1972. The business specializes in the layout, improvement and creation of high-tech a variety of geared motors and helical equipment reducers, worm and worm equipment reducers and planetary reducers. Our items offered to a lot more than 30 international locations all around the world and acquire good reputation and numerous awards in the overseas market for numerous years. In current several years, to attain worldwide production and offer exceptional service,we set up subsidiary of production of planetary gear reducer in China.
History:
1972:ZheCZPT Jun Yi CZPT is founded.
1989:It established a overseas branch company ATRUMP CZPT INC in Los Angeles
1995:Move the ISO9002 Commodity certification.
2003:Pass the CZPT good quality certification and the CZPTpean CE regular test which enabled the products to be offered in CZPTpe
2013:The business set up subsidiary in China to attain international production.
Factory:
Knowledge Produced In ATG,Wisdom The World.
Products:
INSPECTION Products:
FAQ:
(one) Can I be your agent?
Sure, welcome to deep cooperation. We have huge marketing of ATG brand in the market place now. For the particulars you should contact me.
(two) Is OEM CZPT?
Sure, OEM is CZPT. We have specialist designer to assist your brand advertising.
(three) How can I get a sample to check your quality?
After price affirmation, you can demand for samples to verify our high quality. Totally free for the samples, but you require to spend for the freight.
(four)What is your high quality promise?
We have various kinds of merchandise which can meet distinct top quality common.
Our QC office will test goods ahead of transport. We have 100% quality assure to consumers. We will be accountable for any top quality difficulty.
(5) How about the supply time?
The supply time is dependent on the products and the quantity. But usually, the supply time for a container is about one particular month.
Welcome to our firm.
If any issue, come to feel totally free to leave concept on the base of this website page.